Input/Output

2022-10-01 -

Virtual Electronics Lab: How to Create an Oscilloscope Using Python and the ADALM2000

Virtual Electronics Lab: How to Create an Oscilloscope Using Python and the ADALM2000This article explains the importance and convenience of having a virtual electronics laboratory. It also demonstrates how to develop a virtual oscilloscope using the ADALM2000 and Python. Software requirements and hardware setup were discussed before presenting three examples. The admin of this site […]

2022-04-01 -

How to Choose the Best MEMS Sensor for a Wireless Condition-Based Monitoring System—Part 1

How to Choose the Best MEMS Sensor for a Wireless Condition-Based Monitoring System—Part 1This article describes the use of No-OS (No Operating System) Drivers and Platform Drivers for building an application firmware with ADIs Precision A/D Converters and D/A Converters, which offer a high level of performance in speed, power, size and resolution. Rapidly advancing […]

2022-04-01 -

Step-by-Step Noise Analysis Guide for Your Signal Chain

Step-by-Step Noise Analysis Guide for Your Signal ChainThis article presents the steps needed to carry out a theoretical analysis on the noise performance for a high speed wide bandwidth signal chain. Although a specific signal chain is chosen for the analysis, the steps highlighted can be considered valid for any type of signal chain. Five […]

2022-04-01 -

Optical Liquid Analysis Prototyping Platform Lights the Pathway to Ubiquitous Sensing

Optical Liquid Analysis Prototyping Platform Lights the Pathway to Ubiquitous SensingPrototyping complex optical liquid analysis measurements is a challenge that requires careful consideration of how chemistry, optics, and electronics interact to produce a precise result. As the industry advances, intelligent platforms for on-the-go sensing are needed. These platforms need to be highly versatile, capable of […]