EMI

2022-01-05 -

4-Switch Buck-Boost Controller Layout for Low Emissions—Single Hot Loop vs. Dual Hot Loop

Automotive application circuits must meet strict EMI standards to avoid interfering with broadcast and mobile service frequency bands. In many cases, Silent Switcher® and Silent Switcher 2 solutions can make a significant difference in the ability to meet these standards. In all cases, careful layout is imperative. In this article, we investigate two possible solutions […]

2020-05-12 -

How to Minimize EMI effect on Crystal Oscillators

For TATIEN crystal oscillators, top metal covers are electrically connected to GND terminals. The metal covers provide effective shielding against EMI from ASIC inside the oscillator… The admin of this site has disabled the download button for this page.

2019-02-12 -

Stabilized Film Power MELF Resistors

This application note provides information on the use of gate resistors (Rg) to control IGBT switching. The gate resistor influences the IGBT switching time, switching losses, EMI, dv/dt, di/dt…, It has to be selected and optimized very carefully in accordance with the individual application parameters. The admin of this site has disabled the download button […]