Sigma-delta techniques extend DAC resolution
|
2005-06-01 |
| For applications that need more resolution from small or affordable DACs, a sigma-delta modulator can be the solution |
|
MCUs with PPG can function as PWM and DAC
|
2003-12-16 |
| MCUs that include built-in 16bit PPG timers can be configured in PWM mode to generate waveforms with varied pulse width at a constant period, in synchronization with a dedicated external or software trigger. |
|
Setting up a high-performance data acquisition system
|
1999-11-01 |
| You can design a complete data acquisition system around two high-performance but low cost devices -- a microcontroller and a DAC -- affording a level of integration tad short of a system-on-chip solution |
|
Integrating analog video interface IP into SoCs (Part 1)
|
2010-05-13 |
| This two-part series discusses implementation of analog video interfaces that can be embedded into complex SoCs. Part one focuses on the transmitter part of the analog video interface, which is essentially a DAC with video performance |
|
| Web-based EDA tools come to Asia
|
2000-09-01 |
| We can shop for clothing and record albums over the Internet; we can order food, and even have love affairs! Why not design ICs? This was the underlying theme at the recently concluded Design Automation Conference (DAC 2000) in Los Angeles. Look, for example, at the thinking process harnessed by Barcelona Design Systems |
|
DACs with FPGAs for direct-IF architectures
|
2004-02-16 |
| FPGAs allow partitioning from the DAC for flexible pre-processing, making the resulting system more adaptable |
|
| Ikos lawsuit against Axis turns more complex
|
2001-04-15 |
| Is the Ikos lawsuit strictly 'black and white' or is it tied to a takeover bid? This technical news article describes that issue against Axis Systems, which deals about the emulation patents of both companies. |
|
| Moving to 12-bit embedded control
|
2000-08-01 |
| At the Embedded Systems Conference in 1998, Tremont Mao of Analog Devices was demonstrating his own version of the Rube Goldberg machine. |
|
| The future of mixed-signal design
|
2000-02-01 |
| I hear two contradictory things regarding mixed-signal IC design. One set of voices says the systems-on-chip (SoC) of the future will be large mixed-signal systems, and the proportion of these being built will double from about 33 percent currently to 66 percent by 2005. The other set of voices says everything will be big digital chips constructed in ever-deeper submicron CMOS, in that the ASICs of the future will use as many 15 million logic gates, but that the analog and mixed-signal circuitry will be left off-chip. |
|
| Capacitive sensing for specific apps (Part 2)
|
2011-12-22 |
| Read about the design flow and critical design issues including firmware, tuning, and production fine-tuning. |
|
| Pulse-CO oximeter takes blood analysis out of lab
|
2010-03-12 |
| Few disciplines can turn the cold science of metrology into pure art as quickly as medical diagnostics. Here's a teardown of the Masimo's Radical-7 Signal Extraction Pulse-CO Oximeter. |
|
| Digital audio dominates multimedia trends
|
1999-11-10 |
| The recent Analog and Mixed-Signal Conference in California keyed on the three major applications of mixed-signal technology: Communications, Multimedia, and Power Management. |
|
| Design, implement MCU-based current loop calibration device
|
2011-11-11 |
| Read about this low-cost microcontroller-based current loop calibration device to test and calibrate systems that communicate via 4-20 mA current loop standard. |
|
Integrating analog video interface IP into SoCs (Part 2)
|
2010-05-19 |
| In this second part, we focus on the receiver side of the interface—the video analog front end (video AFE or V-AFE). |
|
| Boost SDR performance
|
2012-01-04 |
| Here are some examples of how software for system simulation of RF end-to-end architecture design can be used to address the software defined radio design challenges. |
|
| Using the digital features of high-speed DACs
|
2011-08-01 |
| . Here's a look at the function and value of each of the digital features in today's high-speed digital-to-analog converters. |
|
| Advances in hi-fi digital audio streaming
|
2011-12-13 |
| Know the key elements of the architecture of digital audio streaming equipment, and the new board-level technology that developers should consider when evaluating technology for new product designs. |
|
| Different ways of simulating wideband signals
|
2011-10-26 |
| Here are the alternatives for modulating and then upconverting wideband signals to their operational carrier frequencies. |
|
Singling out a DSP for low-power designs
|
1999-03-01 |
| This paper presents ways on how to look for a device with low operational voltage and efficient architecture. |
|
Raising the PC audio performance bar
|
1998-12-01 |
| A plethora of audio programming interfaces and decompression technologies have made designing PC audio systems a daunting task. Careful IC and board-level design, based on the ACU97 specifications can help improve device performance. |
|
Harnessing the quality of digital audio systems
|
2009-11-24 |
| Engineers developing digital audio systems face many challenges. This article outlines several factors to consider when trying to improve the quality of electronics used to reproduce sounds in a digital environment, including ADCs and DACs. |
|
Easing RF measurements in cellphones
|
2005-05-02 |
| For effortless RF measurement, master two basic test phases during mobile phone production--module test and final test |
|
ADSL: Building a better front-end
|
2002-07-16 |
| null |
|
Hopper hierarchical flow: Improvements for large ICs
|
2001-09-16 |
| This technical article describes the Hopper software hierarchical flow implemented to maximize large, high-performance IC design. |
|
Selecting A/D converters in microprocessor design
|
2002-03-16 |
| The usual method of bringing analog inputs into a microprocessor is to use an ADC. Here are some tips for selecting such a part and calibrating it to fit your needs. |
|
Design RFICs with greater speed, accuracy
|
2006-11-16 |
| In RFIC design, a "meet-in-the-middle" approach balances top-down fast design processes with bottom-up silicon accuracy to produce a predictable schedule, leading to first-pass silicon success. |
|
High-performance delta-sigma ADCs ease converters' limitations
|
2006-08-16 |
| The integration of ADCs and CPUs has forced IC manufacturers to replace transistor-level design with VHDL code, synthesis and standard-cell libraries. This has resulted in lower-performance analog circuitry. |
|
Dual regulator typology needed to power modern cellphones
|
2004-08-16 |
| Advances in process technology require newer power management to wring every minute out of the battery in cellphones. |
|
Is virtual instrumentation an option or need?
|
2005-07-18 |
| Engineers can capitalize on the PC's freedom to define measurement and automation solutions |
|
Low-power digitized receiver for 2.4GHz GFSK apps
|
2005-06-16 |
| A highly digitized architecture offers flexibility at low power, which is important for portable devices that implement emerging wireless standards |
|