Interface Design: [Interface Design/Application Notes][Page 4] News, Tech Articles, App Notes

Design Talk

Low-cost, smart-card interface unveiled
SPI protocol and bus configuration of multiple DCPs This application note describes SPI bus implementations that use Intersil's digitally controlled potentiometers (DCPs).

Application Notes (Sorted By Date)

Using C to interface 8051 MCUs with SPI serial EEPROMs (2008-06-25)
Migrating between boot & uniform sectored flash devices (2008-06-25)
4M-8M SPI cross reference: Spansion, STM, SST, MXIC, Atmel & Winbond (2008-06-25)
CeraDiodes (2008-06-24)
HDMI transmitter/receiver support on TMS320DM6467 (2008-06-20)

TMS320DM6467 universal serial bus downstream host compliance testing (2008-06-20)
Using the STR91xFA external memory interface (EMI) (2008-06-19)
Smartcard interface with the STM32F101xx and STM32F103xx (2008-06-18)
SCI software communication with a PC using ST72251 16bit timer (2008-06-18)
Using ASM and a hardware module to interface 8051 MCUs with I²C serial EEPROMs (2008-06-12)

Implementing DDR2-400 memory interfaces in Spartan-3A FPGAs (2008-06-09)
Interfacing multiple CAT24WCXX serial EEPROMs on the I²C bus (2008-05-28)
CAT51DB2 digitally programmable potentiometer (DPP) demonstration board with incremental up/down interface (2008-05-28)
CAT51DB1 digitally programmable potentiometer (DPP) demonstration board with incremental up/down interface (2008-05-28)
Minimizing the temperature dependence of digitally programmable potentiometers (2008-05-28)

Everything you wanted to know about digitally programmable potentiometers (2008-05-28)
Programmable analog functions (2008-05-28)
Direct digital synthesizers in clocking applications time jitter in direct digital synthesizer-based clocking systems (2008-05-27)
Microcontroller-based serial port interface (SPI) boot circuit (2008-05-27)
Isolating I²C interfaces (2008-05-27)

DDS-based clock jitter performance vs. DAC reconstruction filter performance (2008-05-26)
AD9779A/AD9788: guaranteeing PLL lock over temperature (2008-05-26)
Using the FullFlex dual-port DDR interface (2008-05-26)
Eliminating I/O coupling effects when interfacing large-swing single-ended signals to user I/O pins on Spartan-3 Generation FPGAs (2008-05-26)
Powering and configuring Spartan-3 Generation FPGAs in compliant PCI applications (2008-05-26)

Migrating from EZ-USB HX2 to EX-USB HX2LP (2008-05-23)
Serial EEPROM of HN58X25xxx Series: Control using clock synchronous SCI of Renesas SH (2008-05-23)
Interfacing LVPECL devices to QuickLogic Eclipse and Eclipse-II FPGAs (2008-05-22)
Interfacing the FLEx72 18Mbit synchronous dual-port RAM to the TI TMS320C641x DSPs (2008-05-22)
Implementing depth expansion with the Cypress FLEx72 18Mbit dual-port RAM (2008-05-22)

HSB operation in nvSRAMs (2008-05-22)
EZ-USB FX2/AT2/SX2 reset and power considerations (2008-05-22)
Using C and a timer to interface 8051 MCUs with UNI/O bus-compatible serial EEPROMs (2008-05-21)
Connection diagrams interfacing the MoBL-USBTM FX2LP18 to mobile handset applications and baseband processors (2008-05-16)
USB HID class on an embedded device (2008-05-08)

EV-123 AAT4296 Eval: Five-channel push/pull I/O expander with serial control (2008-05-07)
EV-124 AAT3681: USB Port or AC adapter Li-ion/polymer battery charger (2008-05-07)
EV-125 I²C/S2Cwire controller with AAT1142 demo board (2008-05-07)
AAT1275 Eval: Boost converter with USB power switch (2008-05-05)
Using a timer and I/O pins to interface 8051 MCUs with I²C serial EEPROMs (2008-05-02)

Interfacing baseline PIC MCUs with UNI/O bus-compatible serial EEPROMs (2008-05-01)
Automatic detection of USB port vs. wall adapter power (2008-04-29)
AAT3172 flash programming techniques using the AS²Cwire serial interface (2008-04-29)
Automatic Charge Reduction (CHR) function solves issues with Li-ion battery charging from USB ports (2008-04-29)
USB device stack for PIC32 programmer's guide (2008-04-29)

USB mass storage class on an embedded host (2008-04-28)
Basic application loading over the serial interface for the DaVinci TMS320DM644x (2008-04-25)
How to maintain USB signal integrity when adding ESD protection (2008-04-23)
USB CDC class on an embedded device (2008-04-08)
Using a USB flash drive with an embedded host (2008-04-01)

390 Records, Total 8 Page, The 4 Page

Article review

1 • 2 • 3 • 4 • 5 • 6 • 7 • 8

Highly Recommended Design Articles

•	Battery chargers get charged from solar (2009-09-22)
•	Dealing with capacitance sensor algorithms in multitouch sensing (2009-09-14)
•	The real story about closed-, open-loop Class D amps (2009-09-04)
•	The challenges of car connectivity (2009-09-23)
•	Touchscreen basics: Technology, design (2009-07-14)

eMedia Asia	EE Times - India\|Embedded Design India\|Power Design - India\|\|\|
Global Sources	\|\|\|Electronic Components\|Computer Products\|Trade Show Center
TechInsights	EE Times\|ESM Online\|EE Times JAPAN