Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ) 165-MHz Speed Operation Serial Data Stream at 10× Pixel Clock Rate Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz) Total Raw Capacity 4.95 Gbps (Single Link) HDCP Compatible Low Crosstalk (XTALK = -41 dB Typ) Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max) Low and Flat ON-State Resistance(ron = 6 Max, ron(flat) = 0.5 Typ) Low Input/Output Capacitance(CON = 7.8 pF Typ) Rail-to-Rail Switching on Data I/O Ports (0 to 5 V) VCC Operating Range From 3 V to 3.6 V Ioff Supports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 2000-V Human-Body Model(A114-B, Class II) 1000-V Charged-Device Model (C101) Applications DVI/HDMI Signal Switching Differential DVI, HDMI Signal Multiplexing for Audio/Video Receivers and High-Definition Televisions (HDTVs) DESCRIPTION/ORDERING INFORMATION The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching. This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.