Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Amplifiers/Converters
 
 
Amplifiers/Converters  

Inductor for TAS2552 boosted Class-D amp

Posted: 15 Aug 2014  Print Version  Bookmark and Share

Keywords:boost converter  TAS2552  class-D  class-G  signal level 

The boost converter inside the TAS2552 creates 8.5 V from a 3.0-V to 5.5-V input voltage on the VBAT terminal. This boosted voltage supplies the class-D output stage enabling up to 4 W of power into an 8-Ohm load.

Setting bit D6 in register 2 enables the boost converter. Setting bit D5 in register 2 enables auto pass through mode, which configures the boost converter for class-G mode, automatically turning the boost on or off, depending on the signal level. The threshold and the deactivation delay for auto pass through mode is configurable in register 20.

View the PDF document for more information.

Originally published by Texas Instruments Inc. at www.ti.com as "Inductor Selection for the TAS2552 Boosted Class-D Amplifier".





Article Comments - Inductor for TAS2552 boosted Class-D...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top