Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Optoelectronics/Displays
 
 
Optoelectronics/Displays  

LightCrafter 4500 to synchronize cameras to patterns

Posted: 23 Jul 2014  Print Version  Bookmark and Share

Keywords:LightCrafter 4500  pattern sequence  output triggers  global shutters  cameras 

LightCrafter 4500 features two input and two output triggers for use in synchronizing cameras and other devices with the pattern sequence running on the board. This document focuses only on the output triggers, which are generally used to synchronize cameras with global shutters to allow the capture of each individual frame or pattern in a sequence of frames.

Most cameras with global shutters use opto-isolated trigger inputs in order to provide protection from potentially damaging voltages which may be applied inadvertently. The connector types, exact timing and electrical requirements differ. Please see the manual for a particular camera, or check the manufacturer's website for application notes about using the trigger.

View the PDF document for more information.

Originally published by Texas Instruments Inc. at www.ti.com as "Using DLP LightCrafter 4500 Triggers to Synchronize Cameras to Patterns".





Article Comments - LightCrafter 4500 to synchronize cam...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top