Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Sensors/MEMS
 
 
Sensors/MEMS  

MEMS mic enables contact-free gesture recognition

Posted: 18 Jun 2014  Print Version  Bookmark and Share

Keywords:MEMS  mic  ultrasonic 

Knowles Corp. is blazing new trails in the way users interact with their smart devices, having designed the said world's first MEMS mic for accurate ultrasonic finger tracking. The ultrasonic field at 80kHz will extend in 3D both above and beside the screen so that users no longer have to cover-up the screen items they are controlling with their fingers.

Advanced models facilitating on-screen actions control by waving, pointing, and moulding on-screen images like clay are expected to appear later this year.

"Ultrasonics offers a broader space of control and command than touch alone, it covers a lot wider space above the device than just the size of the screen—so your hand is not always obscuring your view of the screen. Also you can define new gestures such as moving your hand from bottom to top to move to the next line, or moving from side to side to bring up and adjacent screen," Thibault Kassir, senior director, Product Management, Mobile Consumer Electronics, told EE Times. "The other advantage of ultrasonics is the 3D depth-effect—you can define algorithms to use the third dimension for control—for instance to zoom in or out by bringing your hand closer or further away from the screen."

MEMS mic array

Ultrasonic MEMS microphone arrays sense fingers above and alongside smartphone and tablets giving a new third dimension to their control. Source: Knowles

Knowles' SPH0641LU4H-1 measures just 3.5mm by 2.65mm by 0.98mm, making it small enough to use multiple units around the screen—you need at least three to triangulate the position of a finger—and as many as five to take full advantage of the touch-less control possibilities.

"Depending on the precision needed for an application, we've seen applications using as many as five ultrasonic MEMS microphones," Kassir told EE Times. "The ultrasonic microphones can also be used for audio, but it really depends on the use cases—if you are trying to do audio and finger tracking at the same time, it may require you to have additional microphones for audio purposes only. For example, we've seen applications using up to seven microphones—five are ultrasonics and two are just used for audio purposes."

Ultrasonics also can instantly transmit data like photos from handheld to handheld and track special ultrasonic sensitive styluses with unprecedented accuracy. The ultrasonic microphones already consume three-times less power than other digital microphones, according to Knowles, but also go into an "always on" voice-activated super low-power mode when not in use, then quickly power back up when needed.

The signal-to-noise ratio is 64.3dB(A) with a flat frequency response up to 20kHz. Power consumption: 235µA in low-power mode and sensitivity is matched between units by plus or minus 1dB. Mass production of the new ultrasonic microphones will begin in the third quarter of 2014.

- R. Colin Johnson
  EE Times





Article Comments - MEMS mic enables contact-free gestur...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top