Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Amplifiers/Converters
 
 
Amplifiers/Converters  

Dimming driver drives up to nine LEDs from a 36V source

Posted: 10 Jun 2014  Print Version  Bookmark and Share

Keywords:LED  buck  driver  Diodes  dim 

Diodes Inc. launched a dimmable LED buck driver that can drive up to nine LEDs in series from a voltage source of 6V to 36V. The series connection provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors.

The AL8807B enables a reduction in component count and PCB size in 12V and 24V LED lighting systems and MR16-type LED lamps. It is a hysteretic driver integrating a power switch that operates at up to 1MHz with controlled rise and fall times to reduce EMI.

The output current is set using a single external sense resistor and dimming is achieved by applying a fast digital PWM signal to the driver's control input. A low voltage, applied to the same input, turns the output power switch off. Lamp reliability is ensured by the driver's built-in, over-temperature, LED open-circuit and short-circuit protection features.

The driver is housed in a low thermal-resistance MSOP-8EP package, which helps to maximise the permissible LED current over a wider ambient temperature range. It delivers an LED drive current up to 1.3A and operates between -40°C to 125°C with an efficiency of 96 per cent.

AL8807B block diagram

The AL8807B claims an accuracy better than five per cent. Dimming is achieved by applying a PWM signal at the CTRL input pin. Source: Diodes





Article Comments - Dimming driver drives up to nine LED...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

-->
 
 
Back to Top