Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Manufacturing/Packaging
 
 
Manufacturing/Packaging  

OLED enables direct charges across a molecule-wide IC

Posted: 24 Apr 2014  Print Version  Bookmark and Share

Keywords:20nm  OLED  microscale circuit 

Nanoscale electronics has continued to raise the bar on keeping heat and electricity from leaking out of microscopic circuits, so much that chipmakers and academic researchers turn to rather extreme measures to develop circuits below the 20nm level.

There are plenty of research efforts under way to develop reliable ways to build processors with circuits smaller than 14nm (the current commercial state of the art). MIT researchers say that the circuits should assemble themselves. Others are putting their faith in exotic materials or super-refined versions of current methods that use high-energy ultraviolet light, rather than the tired old visible spectrum.

However, researchers at the University of Rochester have slimmed things down far below even the ambitious targets of those projects. They have found a way to send an electric charge across a circuit one molecule wide while insulating it enough to smother the static and field leakage that make microscale circuits (let alone nanoscale ones) difficult to use.

Nano Device

An inert organic layer one molecule thick connects the positive and negative electrodes in a molecular-junction OLED and insulates the conductor above. Source: University of Rochester

"Until now, scientists have been unable to reliably direct a charge from one molecule to another," Alexander Shestopalov, an assistant professor of chemical engineering at the University of Rochester, said in a press release. "But that's exactly what we need to do when working with electronic circuits that are one or two molecules thin." His team published a paper describing the process in the April issue of the journal Advanced Materials Interfaces (registration required).

Shestopalov's team linked an organic light-emitting diode (OLED) to a power source using a microscopic strand of inorganic conductor laid across a one-molecule-thick layer of nonreactive organic material, which insulated the conductor from the underlying environment and allowed for a clean flow of electricity to the OLED.

The insulating layer also contained the charge well enough within the conducting layer to let the researchers closely control the flow by manipulating the charge or changing the hydrogen content in the conducting material to increase or decrease the rate of flow to match the volume required by the OLED.

The bi-layer approach counteracts the variability of even heavily insulated single-layer nanoscale conductors or those that function with little or no insulation.

The resulting product is relatively simple to manufacture, and its performance is consistent and predictable, but it is too fragile to be practical with the materials Shestopalov used as a proof point. "The system we developed degrades quickly at high temperatures. What we need are devices that last for years and that will take time to accomplish."

His goal is to create practical, effective materials that combine layers of semi-conductive materials into composites that can be used for high-efficiency solar cells and other photovoltaics and to increase the efficiency of optical devices by shrinking their components to nanoscale using techniques and materials that make it possible to microprint them easily and cost-effectively.

- Kevin Fogarty
  EE Times





Article Comments - OLED enables direct charges across a...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top