Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Controls/MCUs
 
 
Controls/MCUs  

Production flash programming for MCUs

Posted: 29 Apr 2014  Print Version  Bookmark and Share

Keywords:production flash programming  Kinetis  K-series  L-series  software 

This application note describes recommended steps for production flash programming on Kinetis K-series and L-series devices. There are different options available for the physical interface used for communicating with the microcontroller to program the flash and also multiple commands that can be used to modify the flash contents.

This application note will discuss the different physical interfaces, flash commands, and provide recommended sequences to minimise issues when programming the flash and also decrease flash programming times. The target audience is anyone developing production flash programming hardware, production flash programming software, or a debugger interface that will support flash programming. Although some of the information in this document might be useful for software-controlled field firmware updates, that topic is not explicitly covered.

View the PDF document for more information.

Originally published by Freescale Semiconductor at www.freescale.com as "Production Flash Programming Best Practices for Kinetis K- and L-series MCUs".





Article Comments - Production flash programming for MCU...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top