Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Power/Alternative Energy
 
 
Power/Alternative Energy  

Iron oxide nanoparticles boost battery capacity

Posted: 29 Oct 2013  Print Version  Bookmark and Share

Keywords:lithium-ion batteries  iron oxide nanoparticle  electric vehicles 

A team of scientists at the A*STAR Institute of Materials Research and Engineering has developed an electrode material that is inexpensive, suitable for large-scale manufacturing and can store higher charge densities than the conventional electrodes used in lithium-ion batteries. The scientists stated that the electrode made from iron oxide nanoparticles could help electric vehicles to cover greater distances.

According to Zhaolin Liu of the A*STAR IMRE and Aishui Yu of Fudan University, China, and co-workers, the batteries store and release energy by shuttling lithium ions between two electrodes connected in a circuit. During charging, lithium ions escape from the cathode, which is made from materials such as lithium cobalt oxide. The ions migrate through a liquid electrolyte and into the anode, which is usually made of graphite riddled with tiny pores. When the battery discharges, the process runs in reverse, generating an electrical current between the electrodes.

Iron oxides have a much higher charging capacity than graphite, but the process is slow. Forcing lithium ions into the material also changes its volume, destroying the anode after just a few charging cycles.

Liu, Yu and the team reasoned that an anode made from iron oxide nanoparticles would charge more quickly, because its pores would give ready access to lithium ions. The pores may also allow the material's structure to change as the ions pack inside.

The researchers made 5nm-wide particles of an iron oxide known as α-Fe2O3, simply by heating iron nitrate in water. They mixed the particles with a dust called carbon black, bound them together with polyvinylidene fluoride and coated the mixture onto copper foil to make their anodes.

During the first round of charging and discharging, the anodes showed an efficiency of 75-78 per cent, depending on the current density used. After ten more cycles, however, the efficiency improved to 98 per cent, almost as high as commercial lithium-ion batteries. Research by other teams suggests that during the first few cycles, the iron oxide nanoparticles are broken down until they reach an optimum size.

After 230 cycles the anode's efficiency remained at 97 per cent, with a capacity of 1,009 milliamp hours per gram—almost three times greater than commercial graphite anodes. The material experienced none of the degradation problems that have plagued other iron oxide anodes.

The team is now working to optimise the nanoparticle synthesis and increase the efficiency of the anode's initial charging cycles.





Article Comments - Iron oxide nanoparticles boost batte...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top