Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > T&M
 
 
T&M  

Conducting PIM, S-parameter measurements

Posted: 03 Jan 2013  Print Version  Bookmark and Share

Keywords:Passive intermodulation  S-parameter  vector network analyser 

Passive intermodulation (PIM) is a form of intermodulation distortion that occurs in passive components such as antennas, cables, connectors, or duplexers with two or more high-power input signals. PIM becomes a big issue for modern communication industry. PIM from these passive components in the transmitter path falls in to the receiver path; thus the unwanted signals can increase the noise level of the receiver path that degrades quality of the wireless communication system. In order to comply with the regulations, PIM of passive components test becomes more important nowadays.

This application note introduces the test system that combines PIM and S-parameter measurements of passive components by using the vector network analyser (VNA). The innovative solution with Agilent E5072A ENA Series Network Analyzer 1 is introduced in the document that provides Fast, Flexible and Accurate measurement capabilities. It is a higher-performance and cost-effective solution that can replace the conventional PIM test solutions.

View the PDF document for more information.

Originally published by Agilent Technologies at www.agilent.com as "Innovative Passive Intermodulation (PIM) and S-parameter Measurement Solution with the ENA".





Article Comments - Conducting PIM, S-parameter measurem...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top