Micro-loop mirror design ups silicon chip performance
Doris Keh-Ting Ng of the A*STAR Data Storage Institute and co-workers have now successfully fabricated a laser on top of a silicon chip. The III-V semiconductor materials are bonded to silicon to provide optical gain and the laser has a unique mirror design that promises enhanced device operation compared to the conventional feedback mirrors based on device facets, the researchers said.
"Integrated Si/III-V lasers can take advantage of low-loss silicon waveguides, while addressing the problem of low light emission efficiency that silicon devices typically have," said Ng. Attaching a Si/III-V laser on top of silicon requires challenging fabrication techniques, and device performances can suffer as a result. Furthermore, any laser requires mirrors to maintain lasing action. Typically, such designs rely on the interface between air and the semiconductor, that is, the facets of the chip. These mirrors are not perfect and further reduce operation efficiency, she explained.
Scanning electron microscope image of the silicon-based micro-loop mirror. Light entering the waveguide from the left is guided around the loop and redirected back into the laser structure. The inset shows the laser spot photographed with an infrared camera.
To improve on the latter aspect, the researchers have now come up with a unique mirror design, known as a micro-loop mirror (MLM). Light emitted from one end of the laser is guided along the waveguide, around a narrow bend and is then directed back into the device. The mirror at the other end of the device is still formed by the interface with air, so that laser radiation can exit the device. The MLM achieved a remarkable 98 percent reflection efficiency of light, the reseach showed. Such low losses mean that the MLM laser is comparatively efficient.
The successful demonstration of this technique is remarkable, considering that more than 30 fabrication steps are needed to fabricate the device, and in view of the fact that the MLM requires delicate and high-precision fabrication. The researchers aim to further enhance the laser, for example, by miniaturizing the device.
�Further improvements, for example, at the interface between the mirror and the lasing structure itself could lead to even better performance, Ng said. "Laser with lower threshold and higher output power can possibly be achieved, leading to a potential solution to develop high-speed and low-cost optical communications and interconnects on electronics chips," she added.
|Related Articles||Editor's Choice|