Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
 
EE Times-Asia > Controls/MCUs
 
 
Controls/MCUs  

Intel readies road map for billion-transistor processors

Posted: 08 Jan 2002  Print Version  Bookmark and Share

Keywords:intel  microprocessor  transistor 

Intel Corp. expects its microprocessors to hit one-billion transistors by 2007, up from 42 million in the current Pentium 4, said Gerry Marcyk, director of components research at Intel's development facility.

While process technology generally moves forward in two-year cycleswith shifts to 90nm lithography design rules expected in 2003, to 65nm in 2005, then to 45nm in 2007packaging will have to hustle to keep up the pace, Marcyk said.

The chip industry doesn't pay enough attention to packaging, and putting advanced transistor technology into old packaging "is like putting a Formula One engine in a Yugo body," Marcyk said.

Intel will move from its plastic bumped organic land grid array package to a bumpless package with built-up layers. By embedding a die inside the package and getting rid of the bumps, the package thins down to the thinness of a dime. A thinner package allows faster speeds and halves the number of copper layers in the package, he said.

Intel calls its bumpless package the BBUL, for bumpless build-up layers, and expects it to come into use in the second half of the decade. BBUL would support multiple chips, such as two processors and supporting silicon.

Getting to a terahertz-class transistor this decade will require some radical shifts in process technology, Marcyk said, including fully depleted silicon-on-insulator (FD-SOI), and a new gate oxide material.

FD-SOI places an ultra-thin layer of silicon on top of an insulating substrate, and will help to "completely turn off every atom" in a transistor that is not in use, he said.

Replacing today's nitrided silicon oxide as the gate oxide with a newand as yet publicly unidentifiedgate insulator will require atomic layer deposition tools, rather than the chemical vapor deposition used today. But the upside of the changes is that the new insulation material will reduce current leakage at the gate by three orders of magnitude, Marcyk said.

Cutting leakage current and reducing operating voltage are two important "knobs" that process technologists must turn in order to reduce power consumption in microprocessors.

Lithography remains a challenge as well, though Intel is banking on extreme ultraviolet lithography to replace 157nm scanners in the second half of the decade. Marcyk said Intel is not interested in electron-beam projection lithography because as devices get smaller, the e-beam approach gets slower. But he acknowledged that Intel is looking at some other highly speculative forms of lithography in the lab.

 David Lammers

EE Times





Article Comments - Intel readies road map for billion-t...
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 
 
Back to Top