• A history of developments in programmability (2010-07-01) [ Processors/DSPs ]
• Introduction to dialysis machines (2010-07-01) [ Embedded ]
• Blood glucose meters (2010-07-01) [ Embedded ]
• i.MX51 WinCE clock setting (2010-06-29) [ Controls/MCUs ]
• 3kW fixed-off-time (FOT) power factor correction (2010-06-29) [ Power/Alternative Energy ]

• Achieve low-power, safer LED designs (2010-06-28) [ Power/Alternative Energy ]
• Current sources: options and circuits (2010-06-28) [ Power/Alternative Energy ]
• Basic calculation of a boost converter's power stage (2010-06-28) [ Power/Alternative Energy ]
• A high-level synthesis methodology for complex FPGA (2010-06-25) [ FPGAs/PLDs ]
• Changing the i.MX31 USB PHY (2010-06-25) [ Interface ]

• Interfacing ISP1760; ISP1761 to the Intel PXA25x processor (2010-06-25) [ Controls/MCUs ]
• LatticeSC PURESPEED I/O adaptive input logic user's guide (2010-06-24) [ Interface ]
• Configuring current sharing on the ZL2004 and ZL2006 (2010-06-24) [ Power/Alternative Energy ]
• Using the MCP4728 12bit DAC for LDMOS amplifier bias control applications (2010-06-23) [ RF/Microwave ]
• mTouch metal over cap technology (2010-06-23) [ Sensors/MEMS ]

• LatticeECP3 and LatticeECP2M high-speed backplane measurements (2010-06-22) [ FPGAs/PLDs ]
• Simulation and verification of pulse Doppler radar systems (2010-06-22) [ T&M ]
• Implementing design preservation (2010-06-21) [ FPGAs/PLDs ]
• Measuring ACLR performance in LTE transmitters (2010-06-21) [ T&M ]
• Noise figure measurement accuracy: the Y-factor method (2010-06-21) [ RF/Microwave ]

• Ping-pong configuration guide for ADM1062 to ADM1069 devices (2010-06-18) [ Power/Alternative Energy ]
• Monitoring negative voltages with the ADM1062 to ADM1069 super sequencers (2010-06-18) [ Power/Alternative Energy ]
• Overview of industrial motor control systems (2010-06-17) [ Amplifiers/Converters ]
• SCLT3-8 guidelines for use in industrial automation applications (2010-06-17) [ Interface ]
• Early verification and validation using model-based design (2010-06-16) [ EDA/IP ]

• Optimizing MEMS gyroscope performance with digital control (2010-06-16) [ Controls/MCUs ]
• L6598 offline controller for resonant converters (2010-06-16) [ Power/Alternative Energy ]
• Motionless bandwidth test for MEMS sensors (2010-06-15) [ T&M ]
• iSensor IMU mounting tips (2010-06-15) [ Sensors/MEMS ]
• How multicarrier ADCs withstand large signals (2010-06-14) [ Amplifiers/Converters ]

• ADIS16130 quick start guide and bias optimization tips (2010-06-14) [ Networks ]
• iSensor IMU quick start guide and bias optimization tips (2010-06-14) [ Sensors/MEMS ]
• Non-volatile SRAM (nvSRAM) basics (2010-06-11) [ Memory/Storage ]
• USB vendor commands with PSoC 3 (2010-06-11) [ Embedded ]
• Capacitance sensing—EMC design considerations for PSoC CapSense apps (2010-06-10) [ Embedded ]

• Undershoot effect in RTC circuit of 0.25µ nvSRAM (2010-06-10) [ Memory/Storage ]
• Understanding temperature specifications: an introduction (2010-06-09) [ Power/Alternative Energy ]
• Radiation hardening of Cypress STAR sensors (2010-06-09) [ Sensors/MEMS ]
• Looking acoustically into MEMS devices (2010-06-09) [ T&M ]
• Practical layout for current sensing circuit of IRMCF300 series IC (2010-06-08) [ EDA/IP ]

• Mobile WiMAX PHY layer (RF) operation and measurement (2010-06-08) [ T&M ]
• Scaling custom digital layout for next-generation chip design (2010-06-07) [ EDA/IP ]
• Designing a Hi-Speed USB host PCI adapter using the ISP1561 (2010-06-07) [ EDA/IP ]
• PDIUSBD12 firmware programming guide (2010-06-07) [ Interface ]
• 18W single-stage offline LED driver (2010-06-04) [ Optoelectronics/Displays ]

• IPAD 500µm Flip Chip: package description and recommendations for use (2010-06-04) [ EDA/IP ]
• Adding hysteresis to low-battery input on the TPS62113 (2010-06-03) [ Power/Alternative Energy ]
• 1.8-5.5V input, 3.3V output, high efficiency DC/DC converter (2010-06-03) [ Power/Alternative Energy ]
• Advanced Metering: ecosystem, security threats and counter measures (2010-06-02) [ Networks ]
• OMAP35x to AM35x hardware migration guide (2010-06-02) [ Controls/MCUs ]

• Programming the AD9833/AD9834 (2010-06-02) [ Amplifiers/Converters ]
• ADuC70xx serial download protocol (2010-06-01) [ Memory/Storage ]
• Closed-loop control circuit implementation of the ADuC832 MicroConverter IC and the AD8305 logarithmic converter in a digital variable optical attenuator (2010-06-01) [ Controls/MCUs ]
• Using the TPS2413EVM to demo the TPS2419 (2010-05-31) [ Power/Alternative Energy ]
• Quick-start guide for bq78PL114 with bq76PL102 family gas gauges (2010-05-31) [ Power/Alternative Energy ]

• How to run BSP unit test on Windows CE using i.MX platforms (2010-05-28) [ T&M ]
• ISP1160/01 embedded programming guide (2010-05-27) [ Interface ]
• LLC resonant half-bridge converter design guideline (2010-05-27) [ Amplifiers/Converters ]
• Extending ADC resolution/accuracy (2010-05-27) [ Controls/MCUs ]
• Introduction to electronic calibration, methods for correcting manufacturing tolerances in medical equipment designs (2010-05-26) [ Manufacturing/Packaging ]

• Introduction to DVR and H.264 compression for security and surveillance (2010-05-26) [ Processors/DSPs ]
• PCB design guidelines for the STM32W108 platform (2010-05-25) [ EDA/IP ]
• Wrapper in Matlab for the STEVAL-MKI062V1 (2010-05-25) [ Sensors/MEMS ]
• En route to painless portable USB charging (2010-05-24) [ Power/Alternative Energy ]
• Signal conditioning for piezoelectric sensors (2010-05-24) [ Amplifiers/Converters ]

• PCB layout guidelines for SPEAr3xx (2010-05-24) [ EDA/IP ]
• Automotive high brightness LED control based on the MC9S08MP16 microcontroller (2010-05-21) [ Optoelectronics/Displays ]
• LCD driver specification (2010-05-21) [ Optoelectronics/Displays ]
• What is formal verification? (2010-05-21) [ EDA/IP ]
• Overview of sensor signal paths (2010-05-20) [ Sensors/MEMS ]

• Overview of ultrasound imaging systems, electrical components required for main subfunctions (2010-05-20) [ Processors/DSPs ]
• Integrating analog video interface IP into SoCs (Part 2) (2010-05-19) [ Interface ]
• SimpliciTI on the CC430—practical modifications (2010-05-19) [ Embedded ]
• Usage of MPU sub-regions on the TI TMSx70 Cortex devices (2010-05-19) [ Controls/MCUs ]
• How continuous positive airway pressure (CPAP) respiratory ventilation systems function (2010-05-18) [ Sensors/MEMS ]

• Image processing API for the i.MX platform (2010-05-18) [ Processors/DSPs ]
• A closer look at LVDS (2010-05-17) [ Interface ]
• Introduction to electrocardiographs (2010-05-17) [ Amplifiers/Converters ]
• Advantages of Internet protocol cameras, H.264 compression for security, surveillance video (2010-05-17) [ Processors/DSPs ]
• i.MX35 boot options (2010-05-14) [ Controls/MCUs ]

• Different display configurations on the i.MX35 WinCE PDK (2010-05-14) [ Optoelectronics/Displays ]
• Integrating analog video interface IP into SoCs (Part 1) (2010-05-13) [ Interface ]
• Capacitor selection guide for STM8T and STM8TS capacitive sensors (2010-05-13) [ Sensors/MEMS ]
• PCB layout guidelines for SPEAr600 (2010-05-13) [ EDA/IP ]
• Paving the way to painless product dev't (2010-05-12) [ Embedded ]

• Data whitening and random TX mode (2010-05-12) [ RF/Microwave ]
• How to select Little Logic (2010-05-12) [ EDA/IP ]
• Tilt measurement using&nbsp;a&nbsp;low-<I>g</I> 3-axis accelerometer (2010-05-11) [ Sensors/MEMS ]
• Managing the driver enable signal for RS-485 and IO-link communications with the STM32's USART (2010-05-11) [ Networks ]
• Implementing a variable-length Cat5e cable equalizer (2010-05-07) [ Amplifiers/Converters ]

• A numerical solution to an analog problem (2010-05-07) [ Amplifiers/Converters ]
• How to choose system design methodologies (Part 1) (2010-05-06) [ Embedded ]
• Estimating junction temperature by top surface temperature in power MOSFETs (2010-05-06) [ Power/Alternative Energy ]
• Layout guidelines with example layout for the MAX16922 PMIC (2010-05-06) [ Power/Alternative Energy ]
• OMAP3530 Easy CUS package PCB escape routing (2010-05-05) [ EDA/IP ]

• Signalling rate vs. distance for differential buffers (2010-05-05) [ Amplifiers/Converters ]
• Enabling stop-action cardiac imaging in one scan (2010-05-04) [ Embedded ]
• TPS54620 parallel operation (2010-05-04) [ Power/Alternative Energy ]
• Creating a split-rail power supply with a wide input voltage buck regulator (2010-05-04) [ Power/Alternative Energy ]
• Assembly guidelines for Power33 packaging (2010-04-30) [ EDA/IP ]

• Interfacing PDIUSBD12 to Hitachi H8S/2357 (2010-04-30) [ Interface ]
• Launching Freescale's MARS program for i.MX25 (2010-04-29) [ Controls/MCUs ]
• Protection of automotive electronics from electrical hazards, guidelines for design and component selection (2010-04-29) [ Amplifiers/Converters ]
• Connecting dual-digit LED modules (2010-04-28) [ Interface ]
• MPC553x, MPC555x and MPC556x family Nexus interface connector (2010-04-28) [ Interface ]

• Designing with MOSFET power switches (2010-04-27) [ Power/Alternative Energy ]
• Driving high-speed ADCs: Circuit topologies and system-level parameters (Part 1) (2010-04-27) [ Amplifiers/Converters ]
• Programmable Yn clock phase shift with SN74SSQEA32882 DDR3 register (2010-04-27) [ Memory/Storage ]
• Understanding high-level synthesis design's advantages (2010-04-26) [ EDA/IP ]
• Additional IBIS5A-1300 camera recommendations (2010-04-26) [ Embedded ]

• Calibrating the 16MHz IRC on the MPC5510 (2010-04-26) [ Controls/MCUs ]
• Determining minimum acquisition times for SAR ADCs when a step function is applied to the input (2010-04-23) [ Amplifiers/Converters ]
• Analog front-end design for ECG systems using delta-sigma ADCs (2010-04-23) [ Amplifiers/Converters ]
• Temperature sensor for the HCS08 MCU family (2010-04-22) [ Sensors/MEMS ]
• ISL97635 SMBus LED driver programming instruction (2010-04-22) [ Interface ]

• Implementation of discontinuous PWM in TinyDIP/SMD SPM (2010-04-21) [ Power/Alternative Energy ]
• The advantages of using a quadrature digital upconverter (QDUC) in point-to-point microwave transmit systems (2010-04-21) [ Amplifiers/Converters ]
• Flash/EE memory programming via LIN&#8212;Protocol 6 (2010-04-21) [ Memory/Storage ]
• RTD interfacing and linearization using an ADuC8xx MicroConverter (2010-04-20) [ Interface ]
• Increasing the resolution of analog temperature sensors (2010-04-20) [ Sensors/MEMS ]

• Managing high-current transient loads in battery-powered handhelds (2010-04-19) [ Power/Alternative Energy ]
• CY7C64613 FX conversion to CY7C64713/4 FX1 (2010-04-19) [ Interface ]
• GNU/Linux and EZ-USB: controlling USB devices from user-space (2010-04-19) [ Interface ]
• Verify your PCB/IC thermal modeling (2010-04-16) [ EDA/IP ]
• Automatic generation of state diagrams for the ADM1062 to ADM1069 using Graphviz (2010-04-16) [ Power/Alternative Energy ]

• BLDC motor control with Hall Effect sensors using the 9S08MP (2010-04-16) [ Controls/MCUs ]
• Using a rotary encoder to control PSoC projects: an interrupt-based hybrid design (2010-04-15) [ Embedded ]
• CapSense best practices (2010-04-15) [ Interface ]
• AM3517/05 power reference design 3.6V to 6.3V input, high-efficiency, integrated 5-output PMIC (2010-04-14) [ Power/Alternative Energy ]
• MPC5674F software initialization and optimization (2010-04-14) [ Controls/MCUs ]

• i.MX51 power-up sequence (2010-04-13) [ Controls/MCUs ]
• ESD immunity-level optimization of a high-side switch application based on the VNI4140K (2010-04-13) [ Interface ]
• Driving next-generation cellular tech (2010-04-12) [ RF/Microwave ]
• S-Touch devices: system considerations (2010-04-12) [ Sensors/MEMS ]
• How to configure the STM8A microcontroller clocks (2010-04-12) [ Controls/MCUs ]

• MSP430 microcontroller software for handheld fuel gauges and battery authentication products (2010-04-09) [ Power/Alternative Energy ]
• Battery technology used in NVRAM products from ST (2010-04-09) [ Power/Alternative Energy ]
• Reducing the average power consumption of accelerometers (2010-04-08) [ Sensors/MEMS ]
• LM3409 demonstration board (2010-04-08) [ Power/Alternative Energy ]
• Test plan for Agilent HDMI 1.4 (2010-04-07) [ T&M ]

• Power reference design for the TMS320C6472, 12Vin DC/DC controllers and LDOs (1x C6472) (2010-04-07) [ Power/Alternative Energy ]
• Using the DLP Pico 2.0 kit for structured light applications (2010-04-07) [ Optoelectronics/Displays ]
• Programming the TMS320VC5509 ADC peripheral (2010-04-06) [ Power/Alternative Energy ]
• Real-time performance using FIQ interrupt handling in SPEAr MPUs (2010-04-06) [ Controls/MCUs ]
• The challenges of smart phone accessory design projects (2010-04-05) [ Embedded ]

• Heart rate monitor and electrocardiograph fundamentals (2010-04-05) [ Controls/MCUs ]
• Getting started with WinCE 6.0 VPU applications (2010-04-05) [ Processors/DSPs ]
• Migrating from MSP430F541x/F543x to MSP430F541xA/F543xA (2010-04-01) [ Embedded ]
• The move to a discrete Serdes solution for 4G (2010-03-31) [ Interface ]
• Configuring the testbench using OVM configuration classes (2010-03-31) [ EDA/IP ]

• MSP430 interface to CC1100/2500 code library (2010-03-31) [ Controls/MCUs ]
• Advanced debugging using the enhanced emulation module (EEM) (2010-03-31) [ T&M ]
• MPR121 GPIO and LED driver function (2010-03-30) [ Sensors/MEMS ]
• MPR121 proximity detection (2010-03-30) [ Sensors/MEMS ]
• Design of an electrically isolated USB interface (2010-03-29) [ Interface ]

• i.MX27 to i.MX25 porting guide (2010-03-29) [ Controls/MCUs ]
• Improving LCD TV power supply efficiency (2010-03-29) [ Power/Alternative Energy ]
• Understanding key specs in reliable capacitive touchscreens (2010-03-26) [ Sensors/MEMS ]
• Using the video port of TMS320DM646x (2010-03-26) [ Processors/DSPs ]
• TMS320TCI6487/88 hardware design guide (2010-03-26) [ Embedded ]

• Configuring the SPEAr3xx multiport memory controller (MPMC) for external DDR SDRAM (2010-03-25) [ Memory/Storage ]
• Principles of capacitive touch and proximity sensing technology (2010-03-25) [ Sensors/MEMS ]
• Carrying out Autosar CAN diagnoses (2010-03-24) [ Interface ]
• Implementing a driven shield on STM8T and STM8TS capacitive sensors (2010-03-24) [ Sensors/MEMS ]
• Guidelines for designing touch sensing applications (2010-03-24) [ EDA/IP ]

• Reducing power consumption in MPUs with FPGAs (2010-03-22) [ FPGAs/PLDs ]
• Cyclone IV design guidelines (2010-03-19) [ FPGAs/PLDs ]
• DPRIO and multiple instances SDI application (2010-03-19) [ Controls/MCUs ]
• Geo-magnetic sensors: propelling disruptive consumer apps (2010-03-19) [ Sensors/MEMS ]
• FEC decoding (2010-03-18) [ Embedded ]

• AM18xx pin multiplexing utility (2010-03-18) [ Embedded ]
• TMS320DM36x VICP algorithms and codecs integration (2010-03-17) [ Controls/MCUs ]
• Calibrating iMEMS gyroscopes (2010-03-17) [ Sensors/MEMS ]
• Reducing power consumption with low-power CPLD designs (2010-03-16) [ FPGAs/PLDs ]
• i.MX35 board initialization and memory mapping using the Linux target image builder (LTIB) (2010-03-16) [ Memory/Storage ]

• i.MX51 board initialization and memory mapping using the Linux target image builder (LTIB) (2010-03-16) [ Memory/Storage ]
• MC13892 layout guidelines (2010-03-15) [ EDA/IP ]
• Interfacing DDR memories with the i.MX31 (2010-03-15) [ Memory/Storage ]
• Comparing bus solutions (2010-03-12) [ Interface ]
• Troubleshooting I&#178;C bus protocol (2010-03-12) [ Interface ]

• Achieving timing closure in basic (PMA direct) functional mode (2010-03-11) [ FPGAs/PLDs ]
• Flash programming routines for the HCS08 and the ColdFire (V1) devices (2010-03-11) [ Memory/Storage ]
• LM3429 boost evaluation board (2010-03-10) [ Power/Alternative Energy ]
• LM3429 buck-boost evaluation board (2010-03-10) [ Power/Alternative Energy ]
• How to deal with worst slew propagation (2010-03-10) [ EDA/IP ]

• Changing the i.MX51 NAND flash model for Windows Embedded CE 6.0 (2010-03-09) [ Memory/Storage ]
• Low-power modes and auto-wake/sleep using the MMA8450Q (2010-03-09) [ Power/Alternative Energy ]
• Moving DSP industrial apps onto FPGAs (2010-03-09) [ FPGAs/PLDs ]
• Data manipulation and basic settings of the MMA8450Q with driver code (2010-03-08) [ Sensors/MEMS ]
• High pass filtered data and transient detection using the MMA8450Q (2010-03-08) [ Sensors/MEMS ]

• Motion and freefall detection using the MMA8450Q (2010-03-05) [ Sensors/MEMS ]
• Managing failure detections and using required components to meet ISO7637 pulse 1 on MC33903/4/5 common mode choke implementation (2010-03-05) [ Interface ]
• C library source code for M29W256 flash memory using the flash device driver software interface (2010-03-04) [ Memory/Storage ]
• Adding device(s) to the CodeWarrior flash programmer for microcontrollers V10.0 (2010-03-04) [ Controls/MCUs ]
• Implementing low, high frequency ADCs using reference designs (2010-03-04) [ Amplifiers/Converters ]

• How to migrate from M29W128FH/L to M29W128GH/L flash memories (2010-03-03) [ Memory/Storage ]
• How to boot an embedded system from an eMMC equipped with a Microsoft FAT file system (2010-03-03) [ Memory/Storage ]
• How to migrate from the M58BW016DT/B to the M58BW016FT/B flash memories (2010-03-02) [ Memory/Storage ]
• Migrating from a chip enable care to a chip enable don't care NAND flash memory (2010-03-02) [ Memory/Storage ]
• Living up to MEMS sensor's initial promise (2010-03-02) [ Sensors/MEMS ]

• Connecting a MPC56x MCU to the M58BW016B/D flash memory (2010-03-01) [ Memory/Storage ]
• Spread spectrum timing for HDD applications (2010-03-01) [ Memory/Storage ]
• How to migrate to Numonyx M29W800D from Spansion S29AL008J/D flash memory (2010-02-26) [ Memory/Storage ]
• How to migrate to Numonyx M29W400D from Spansion S29AL004D flash memory (2010-02-26) [ Memory/Storage ]
• Addressing IC reliability issues (Part 1) (2010-02-26) [ EDA/IP ]

• Migration to 90nm 5V Async SRAMs (2010-02-25) [ Memory/Storage ]
• Color reconstruction with high dynamic range modes (2010-02-25) [ Sensors/MEMS ]
• Extracting latitude and longitude from a GPS device for Windows Embedded CE 6.0 (2010-02-24) [ Amplifiers/Converters ]
• Customizing the Freescale Advanced Toolkit for i.MX-based platforms (2010-02-24) [ Embedded ]
• Building a 3D graphic user interface in Linux (2010-02-23) [ Interface ]

• 3D animation techniques on the i.MX31 PDK (2010-02-23) [ Processors/DSPs ]
• Protecting data with battery-free RAID solution (2010-02-23) [ Memory/Storage ]
• How to write Flash programming applets (2010-02-22) [ Interface ]
• Pulse oximeter-standard (2010-02-22) [ Sensors/MEMS ]
• Using PortA on AN2131-DK001 Cypress USB Full-Speed Development Kit (2010-02-19) [ Interface ]

• Connection of a 3.3V optical module to a CY7C924ADX (2010-02-19) [ Interface ]
• Dealing with formal verification constraints (2010-02-19) [ EDA/IP ]
• Building an EZ-Host/OTG project from start to finish (2010-02-18) [ EDA/IP ]
• USB On-The-Go (OTG) basics (2010-02-18) [ Interface ]
• High-end 3D graphics with OpenGL ES 2.0 (2010-02-17) [ Controls/MCUs ]

• MMA8450Q design checklist and board mounting guidelines (2010-02-17) [ EDA/IP ]
• Adding UART Bluetooth solution to i.MX Windows CE 5.0/6.0 (2010-02-16) [ RF/Microwave ]
• MC13783 buck and boost inductor sizing (2010-02-16) [ Power/Alternative Energy ]
• Design recommendations to implement compatibility between the MC13783VK and the MC13783VK5 (2010-02-15) [ Interface ]
• External component recommendations for the MC13783 reference design (2010-02-15) [ Interface ]

• Improve system performance with differential signal chains (2010-02-15) [ Amplifiers/Converters ]
• TPS22960 load switch with controlled turn-on control: utilizing a dual load switch configuration connected in parallel (2010-02-12) [ Power/Alternative Energy ]
• Using ON Semiconductor's serial EEPROMs in shared I/O configuration (2010-02-12) [ Memory/Storage ]
• TMS320C6474 hardware design guide (2010-02-11) [ Embedded ]
• Infrared thermometer using PSoC (2010-02-11) [ Amplifiers/Converters ]

• Analog voltage-to-frequency converter (continuous type) (2010-02-10) [ Power/Alternative Energy ]
• Sensorless BLDC motor control based on CY8C3866AXI (2010-02-10) [ Embedded ]
• Facing the challenges of multicore tech (2010-02-10) [ Controls/MCUs ]
• Frequently asked questions about the RoboClockII family (2010-02-09) [ Interface ]
• Forcing C variables into memory pages (2010-02-09) [ Memory/Storage ]

• Design of differential filters for high-speed signal chains (2010-02-08) [ Amplifiers/Converters ]
• Consumer/industrial&#8212;hardware random number generator (2010-02-08) [ Embedded ]
• How to generate golden image for single-cell impedance track devices (2010-02-05) [ Power/Alternative Energy ]
• iButton data-logger calibration and NIST certificate FAQs (2010-02-05) [ Amplifiers/Converters ]
• Wireline data transmission and reception (2010-02-04) [ Amplifiers/Converters ]

• What is a .tmap file? (2010-02-03) [ Power/Alternative Energy ]
• Data flash programming and calibrating the bq20z80 family of gas gauges (2010-02-02) [ Power/Alternative Energy ]
• Addressing system-level ESD questions (2010-02-02) [ Amplifiers/Converters ]
• Isolated CAN reference design (2010-02-01) [ Power/Alternative Energy ]
• Smart codec features in TMS320DM365 (2010-01-29) [ Processors/DSPs ]

• Transitioning to next-gen automated design tools (2010-01-29) [ EDA/IP ]
• DPP to control LED brightness (2010-01-28) [ Interface ]
• Dealing with automotive radio design challenges (2010-01-28) [ RF/Microwave ]
• LCD backlight inverter drive IC (FAN7310) (2010-01-27) [ Power/Alternative Energy ]
• Understanding the different types of clock jitter (2010-01-27) [ Power/Alternative Energy ]

• TMS320DM365 preview of codec porting on Linux (2010-01-26) [ Processors/DSPs ]
• LCD backlight inverter drive IC (FAN7311) (2010-01-25) [ Power/Alternative Energy ]
• Solving today's problem of SoC verification (2010-01-22) [ EDA/IP ]
• How to calculate the settling time and sampling rate of a multiplexer (2010-01-22) [ Amplifiers/Converters ]
• MRF49XA radio utility program (2010-01-21) [ T&M ]

• High quality, all-digital RF frequency modulation generation with the ADSP-2181 DSP and the AD9850 direct digital synthesizer (2010-01-20) [ Processors/DSPs ]
• Designing a superheterodyne receiver using an IF sampling diversity chipset (2010-01-19) [ RF/Microwave ]
• Thermocouple signal conditioning using the AD594/AD595 (2010-01-18) [ Power/Alternative Energy ]
• Employing ARM NEON in embedded system's audio processing (2010-01-15) [ Controls/MCUs ]
• Benefits and challenges of high-frequency regulators (2010-01-15) [ Amplifiers/Converters ]

• Transitioning from ADXL202 to ADXL213 or ADXL203 (2010-01-14) [ Sensors/MEMS ]
• A compact algorithm using the ADXL213 duty cycle output (2010-01-13) [ Controls/MCUs ]
• Targeting small delay defects (2010-01-13) [ EDA/IP ]
• Designing a Hi-Speed USB host PCI adapter using ISP1564/8A (2010-01-12) [ Interface ]
• CLT3-4BT6 demoboard: Check the robustness of CLT3-4BT6 (2010-01-11) [ Optoelectronics/Displays ]

• Optimizing MCU power efficiency for ultralow-power designs (2010-01-11) [ Controls/MCUs ]
• CapSense Express&#8212;design to production (2010-01-08) [ Sensors/MEMS ]
• Supplement the MAX6948 WLED driver with external PWM control (2010-01-07) [ Optoelectronics/Displays ]
• Anti-tamper protection for Cyclone III LS devices (2010-01-06) [ FPGAs/PLDs ]
• How to build a network performance analysis test system using Linux (2010-01-06) [ T&M ]

• Using the MC34845 for larger LCD displays (2010-01-05) [ Optoelectronics/Displays ]
• Using the design security feature in Cyclone III LS devices (2010-01-04) [ FPGAs/PLDs ]