• Employ fencing for best EMI protection (2008-07-01) [ EDA/IC Design ]
• Features define multimedia handsets (2008-07-01) [ RF/Wireless ]
• Implement H-bridges to power automotive SoCs (2008-07-01) [ Embedded Systems ]
• Integrate SMPS control in LED applications (2008-07-01) [ Optical Electronics and Display ]
• IEEE 1588 Implementation on a ColdFire Processor (2008-06-30) [ Networking Design ]

• Accelerometer demonstration with the 13213 sensor reference board (2008-06-30) [ Sensor Technology ]
• FAN3800 application guide (2008-06-30) [ Networking Design ]
• Guidelines on leadforming, trimming lead length, and heatsink mounting (2008-06-30) [ Test/Packaging ]
• Smart Power Module Tiny-DIP-SPM User?s Guide (2008-06-30) [ Power Design ]
• Applying SG6203 to control a synchronous rectifier of a flyback power supply. (2008-06-30) [ Power Design ]

• Application review and comparative evaluation of low-side gate driver (2008-06-30) [ Power Design ]
• Applying SG5841 to control a flyback power supply (2008-06-30) [ Power Design ]
• Smart Power Module DIP-SPM User?s Guide (2008-06-30) [ Power Design ]
• Applying SG6902 to control a CCM PFC and flyback/PWM power supply (2008-06-30) [ Power Design ]
• Low-cost, green-mode PWM controller for flyback converters (2008-06-30) [ Power Design ]

• Design and application guide for SG6859A (2008-06-30) [ Power Design ]
• Flyback power supply control with the SG6741 (2008-06-30) [ Power Design ]
• FAN5109 V<SUB>CC</SUB> bypass considerations to reduce voltage spikes (2008-06-30) [ Power Design ]
• Configuring the FAN5182 over-current circuit (2008-06-30) [ Power Design ]
• Smart Power Module Motion-SPM in Mini DIP SPM Ver.4 User?s Guide (2008-06-30) [ Power Design ]

• Using microcontrollers in digital signal processing applications (2008-06-30) [ Digital Signal Processing ]
• Understanding typical and maximum program/erase performance (2008-06-30) [ Buffer/Storage ]
• What types of ECC should be used on flash memory? (2008-06-30) [ Buffer/Storage ]
• Signal integrity and reliable flash operations (2008-06-30) [ RF/Wireless ]
• Using CFI to read and debug systems (2008-06-30) [ Buffer/Storage ]

• Quick guide to Common Flash Interface (2008-06-30) [ Buffer/Storage ]
• Example of TMU operation (Generating 1 second by fixed interval timer) (2008-06-30) [ EDA/IC Design ]
• Writing to flash from firmware (2008-06-28) [ Buffer/Storage ]
• AAT4621EV: Evaluation kit guide for AAT4621 PC card supercap charger (2008-06-27) [ Power Design ]
• A discussion of the A&#178;2Cwire (Advanced Simple Serial Control) single-wire interface (2008-06-27) [ Interface Design ]

• A complete discussion of the S&#178;Cwire (Simple Serial Control) single-wire interface with T_LAT specification (2008-06-27) [ Interface Design ]
• Capacitive touch sense solution (2008-06-27) [ Sensor Technology ]
• Advanced encryption standard (2008-06-27) [ Security Design ]
• USB mass storage device reference design programmer's guide (2008-06-27) [ Interface Design ]
• Embedded Ethernet system design guide (2008-06-27) [ Embedded Systems ]

• A simple model for DC/DC charge pumps (2008-06-26) [ Amplifying/Conditioning/Converting ]
• Step-down DC/DC converter input ripple and noise (2008-06-26) [ Amplifying/Conditioning/Converting ]
• Edge Rate ERM8/ERF8 Series 10mm stack height Final Inch designs in PCI Express applications Generation 2&#8212;5.0Gbps (2008-06-26) [ Networking Design ]
• Crosstalk measurement, extraction and validation in 10Gbps serial systems (2008-06-26) [ Embedded Systems ]
• Current measurement applications handbook (2008-06-26) [ Power Design ]

• Flash memory erase mode comparison: Simultaneous read/write vs erase suspend (2008-06-26) [ EDA/IC Design ]
• Practical guide to endurance and data retention (2008-06-26) [ EDA/IC Design ]
• Common flash memory interface specification (2008-06-26) [ Buffer/Storage ]
• Understanding burst mode NOR flash devices (2008-06-26) [ Buffer/Storage ]
• Interfacing 8051 MCUs with SPI serial EEPROMs (2008-06-25) [ Buffer/Storage ]

• Interfacing 8051 MCUs with I&#178;C serial EEPROMs (2008-06-25) [ Buffer/Storage ]
• Using a hardware module to interface 8051 MCUs with SPI serial EEPROMs (2008-06-25) [ Buffer/Storage ]
• Using C to interface 8051 MCUs with SPI serial EEPROMs (2008-06-25) [ Buffer/Storage ]
• MRF24J40 basic driver (2008-06-25) [ RF/Wireless ]
• Taking advantange of page mode read on the MCF5407 Coldfire (2008-06-25) [ Buffer/Storage ]

• Optimizing program/erase times (2008-06-25) [ EDA/IC Design ]
• Migrating between boot & uniform sectored flash devices (2008-06-25) [ Buffer/Storage ]
• 4M-8M SPI cross reference: Spansion, STM, SST, MXIC, Atmel & Winbond (2008-06-25) [ Buffer/Storage ]
• Host Design Considerations: NAND MMC and SD-based Products (2008-06-25) [ Buffer/Storage ]
• Optimization of CF host operation (2008-06-25) [ Buffer/Storage ]

• TDR impedance measurements: A foundation for signal integrity (2008-06-25) [ Design Test ]
• CeraDiodes (2008-06-24) [ EMI/EMC Design ]
• NTC thermistors for inrush current limiting (2008-06-24) [ Power Design ]
• PTC thermistors (2008-06-24) [ Power Design ]
• PFC in the plastic industry (2008-06-24) [ Power Design ]

• MKV capacitors: Rugged types for rough conditions (2008-06-24) [ Power Design ]
• Controlling the Power&#8212;Dynamic PFC controller series BR604 and BR6000 (2008-06-24) [ Power Design ]
• More power with PhaseCap (2008-06-24) [ Power Design ]
• Dynamic PFC: Power quality at the docks (2008-06-24) [ Power Design ]
• Optimized design of power factor correction systems (2008-06-24) [ Power Design ]

• PoleCap: Power factor correction on site (2008-06-24) [ Power Design ]
• Converters with an active front end (2008-06-24) [ Amplifying/Conditioning/Converting ]
• Ferrites and accessories (2008-06-24) [ Networking Design ]
• HomeCap: Residential power factor correction (2008-06-24) [ Power Design ]
• Testing modern radios (2008-06-24) [ EDA/IC Design ]

• Solving the most difficult RFID testing challenges (2008-06-24) [ Design Test ]
• Understanding digital video interface (DVI) compliance testing (2008-06-24) [ Design Test ]
• Real-time spectrum analysis for EMI diagnostics (2008-06-24) [ Design Test ]
• SA2600 field spectrum management (2008-06-24) [ Design Test ]
• Measuring and interpreting picture quality in MPEG compressed video content (2008-06-24) [ Design Test ]

• TMS320DM642 to TMS320DM6437 migration guide (2008-06-23) [ Digital Signal Processing ]
• Common trace transmission problems and solutions (2008-06-23) [ EDA/IC Design ]
• Understanding TI's PCB routing rule-based DDR timing specification (2008-06-23) [ EDA/IC Design ]
• HDMI transmitter/receiver support on TMS320DM6467 (2008-06-20) [ RF/Wireless ]
• Implementing DDR2 PCB layout on the TMS320DM646x DSP (2008-06-20) [ EDA/IC Design ]

• TMS320DM6467 universal serial bus downstream host compliance testing (2008-06-20) [ Interface Design ]
• Example of using the SCIF in asynchronous mode (serial data transfer) (2008-06-19) [ Digital Signal Processing ]
• Example of memory-to-memory transfer by the DMAC (LRAM to DDR SDRAM) (2008-06-19) [ Buffer/Storage ]
• SH7780 initialization example (2008-06-19) [ EDA/IC Design ]
• Using the STR91xFA external memory interface (EMI) (2008-06-19) [ Buffer/Storage ]

• How to connect a small page NAND flash memory to STR710 (2008-06-19) [ Buffer/Storage ]
• STM32F101xx and STM32F103xx system memory boot mode (2008-06-18) [ Buffer/Storage ]
• How to use the high-density STM32F103xx microcontroller to play audio files with an external I&#178;S audio codec (2008-06-18) [ Digital Signal Processing ]
• STM32F10xxx in-application programming using the USART (2008-06-18) [ Buffer/Storage ]
• How to migrate from STM32F10xxx FWLib V1.0 to V2.0 (2008-06-18) [ Embedded Systems ]

• Smartcard interface with the STM32F101xx and STM32F103xx (2008-06-18) [ Interface Design ]
• SCI software communication with a PC using ST72251 16bit timer (2008-06-18) [ Interface Design ]
• C8051F35X delta-sigma ADC user's guide (2008-06-17) [ Amplifying/Conditioning/Converting ]
• WLCSP assembly guidelines (2008-06-16) [ Test/Packaging ]
• A guide to basic audio measurements (2008-06-16) [ Test/Packaging ]

• Ensure HDMI interoperability of consumer electronics (2008-06-16) [ Test/Packaging ]
• Silicon tuners take on terrestrial TV (2008-06-16) [ RF/Wireless ]
• Persistent memory makes cars smarter (2008-06-16) [ Buffer/Storage ]
• Boost TV performance with 2D LED dimming (2008-06-16) [ Optical Electronics and Display ]
• Extend battery life with proper charging, discharging (2008-06-16) [ Power Design ]

• Achieve scalable, flexible in-vehicle networking (2008-06-16) [ Programmable Logic ]
• Analyzing jitter using a spectrum approach (2008-06-13) [ Test/Packaging ]
• Design considerations for a transimpedance amplifier (2008-06-13) [ EDA/IC Design ]
• Using ASM and a hardware module to interface 8051 MCUs with I&#178;C serial EEPROMs (2008-06-12) [ Buffer/Storage ]
• 1-Wire communication with PIC microcontroller (2008-06-11) [ Control Design ]

• Lithium-ion battery charging using bipolar transistors (2008-06-10) [ Power Design ]
• Implementing DDR2-400 memory interfaces in Spartan-3A FPGAs (2008-06-09) [ Buffer/Storage ]
• Xilinx in-system programming using an embedded microcontroller (2008-06-09) [ Programmable Logic ]
• ISL8013EVAL2Z: 3A low quiescent current 1MHz high efficiency synchronous buck regulator (2008-06-09) [ Power Design ]
• ISL6269AEVAL2Z user guide for ISL6269A and ISL6269B PWM controllers (2008-06-06) [ Power Design ]

• Configure analyzers for proper measurement (2008-06-02) [ Design Test ]
• Hints on wireless USB via UWB tests (2008-06-02) [ Test/Packaging ]
• Save power with omniscient code generation (2008-06-02) [ Embedded Systems ]
• Evolving PONs demand FPGA flexibility (2008-06-02) [ Programmable Logic ]
• Gain from non-volatile memory in flash-based MCUs (2008-06-02) [ Control Design ]

• Understand, test OCP SystemC channel models (2008-06-02) [ Embedded Systems ]
• Power-over-Ethernet goes green (2008-06-02) [ Design Test ]
• Interfacing multiple CAT24WCXX serial EEPROMs on the I&#178;C bus (2008-05-28) [ Buffer/Storage ]
• CAT93CXX serial EEPROM design guidelines for power up and power down operation (2008-05-28) [ Buffer/Storage ]
• CAT3200DB1 demonstration board for the CAT3200 DC/DC converter (2008-05-28) [ Amplifying/Conditioning/Converting ]

• CAT32EVAL1 evaluation board for CAT32 white LED driver (2008-05-28) [ Optical Electronics and Display ]
• CAT51DB2 digitally programmable potentiometer (DPP) demonstration board with incremental up/down interface (2008-05-28) [ Interface Design ]
• CAT51DB1 digitally programmable potentiometer (DPP) demonstration board with incremental up/down interface (2008-05-28) [ Interface Design ]
• Data protection and power up/down sequence for CAT25CXXX SPI serial EEPROM devices (2008-05-28) [ Security Design ]
• Minimizing the temperature dependence of digitally programmable potentiometers (2008-05-28) [ Interface Design ]

• Everything you wanted to know about digitally programmable potentiometers (2008-05-28) [ Interface Design ]
• Programmable analog functions (2008-05-28) [ Interface Design ]
• Enhancing the performance of pedometers using a single accelerometer (2008-05-28) [ Design Test ]
• Digital quadrature modulator gain (2008-05-28) [ RF/Wireless ]
• Driving a center-tapped transformer with a balanced current-output DAC (2008-05-28) [ Amplifying/Conditioning/Converting ]

• ADG9xx wideband CMOS switches: frequently asked questions (2008-05-27) [ Networking Design ]
• Digital pulse-shaping filter basics (2008-05-27) [ RF/Wireless ]
• Multicarrier CDMA2000 feasibility (2008-05-27) [ RF/Wireless ]
• Direct digital synthesizers in clocking applications time jitter in direct digital synthesizer-based clocking systems (2008-05-27) [ Interface Design ]
• Multicarrier W-CDMA feasibility (2008-05-27) [ RF/Wireless ]

• Pin-compatible high-speed ADCs simplify design tasks (2008-05-27) [ Amplifying/Conditioning/Converting ]
• Microcontroller-based serial port interface (SPI) boot circuit (2008-05-27) [ Interface Design ]
• Super-Nyquist operation of the AD9912 yields a high RF output signal (2008-05-27) [ Amplifying/Conditioning/Converting ]
• Designing an ADC transformer-coupled front end (2008-05-27) [ Amplifying/Conditioning/Converting ]
• Isolating I&#178;C interfaces (2008-05-27) [ Interface Design ]

• Digital and analog measurement units for digital CMOS microphone preamplifier ASICs (2008-05-27) [ Design Test ]
• A 2.4GHz WiMAX direct conversion transmitter (2008-05-27) [ RF/Wireless ]
• Power supply sequencing (2008-05-27) [ Power Design ]
• Operating the ADG12xx series of parts with &#177;5V supplies and the impact on performance (2008-05-26) [ Networking Design ]
• 60dB wide-dynamic-range, low-frequency AGC circuit using a single VGA (2008-05-26) [ Amplifying/Conditioning/Converting ]

• DDS-based clock jitter performance vs. DAC reconstruction filter performance (2008-05-26) [ Interface Design ]
• Gain, LO and phase compensation in a single sideband transmitter using the AD9788 TxDAC and ADL5372 quadrature modulator (2008-05-26) [ RF/Wireless ]
• Determining if a spur is related to the DDS/DAC or to some other source (2008-05-26) [ Amplifying/Conditioning/Converting ]
• AD9779A/AD9788: guaranteeing PLL lock over temperature (2008-05-26) [ Interface Design ]
• EDID and HDCP controller user?s guide for the AD9889 (2008-05-26) [ Control Design ]

• A detailed guide to powering the TigerSHARC processors (2008-05-26) [ Embedded Systems ]
• Signal bandwidth vs. resolution for analog video (2008-05-26) [ Amplifying/Conditioning/Converting ]
• V-to-F converter (continuous type) and wind noise simulator (2008-05-26) [ RF/Wireless ]
• Using the FullFlex dual-port DDR interface (2008-05-26) [ Buffer/Storage ]
• Using nvSRAM in single board computer (SBC) applications (2008-05-26) [ Buffer/Storage ]

• USB-powered battery charger for NiCd/NiMH batteries (2008-05-26) [ Power Design ]
• The failure mode and effect analysis (FMEA) implementation for CSD (2008-05-26) [ Design Test ]
• Eliminating I/O coupling effects when interfacing large-swing single-ended signals to user I/O pins on Spartan-3 Generation FPGAs (2008-05-26) [ EDA/IC Design ]
• Spartan-3A DSP S3D1800A starter platform features and functions (2008-05-26) [ Programmable Logic ]
• Custom PCI timing budgets for Spartan-3 generation FPGAs (2008-05-26) [ Programmable Logic ]

• Powering and configuring Spartan-3 Generation FPGAs in compliant PCI applications (2008-05-26) [ Programmable Logic ]
• Spartan-3A DSP FPGA Video Starter Kit (2008-05-26) [ Programmable Logic ]
• Storage capacitor options for Cypress nvSRAM (2008-05-23) [ Buffer/Storage ]
• Standalone RPM measurement system with LED display and PSoC (2008-05-23) [ Design Test ]
• Serial LCD Nexus with IR repeater (2008-05-23) [ Optical Electronics and Display ]

• Migrating from EZ-USB HX2 to EX-USB HX2LP (2008-05-23) [ Interface Design ]
• Manchester Decoder using PSoC (2008-05-23) [ Embedded Systems ]
• SuperH RISC engine C/C++ compiler package application note: [Compiler use guide] Object usage guide (2008-05-23) [ EDA/IC Design ]
• SuperH RISC engine C/C++ compiler package application note: [IDE User's Guide] Simulator usage guide (2008-05-23) [ EDA/IC Design ]
• SuperH RISC engine C/C++ compiler package application note: [Compiler use guide] Object uniting function use guide (2008-05-23) [ EDA/IC Design ]

• SuperH RISC engine C/C++ compiler package application note: [IDE user's guide] test automation and support facilities (2008-05-23) [ Design Test ]
• SuperH RISC engine C/C++ compiler package application note : < Reference> Data of Library (2008-05-23) [ Embedded Systems ]
• SuperH RISC engine C/C++ compiler package application note: [Reference] Additional functions (2008-05-23) [ Embedded Systems ]
• Serial EEPROM of HN58X25xxx Series: Control using clock synchronous SCI of Renesas SH (2008-05-23) [ Interface Design ]
• SH7147: Synchronous serial communication unit master transmission/reception (Writing to/Reading from EEPROM via SPI bus) (2008-05-23) [ EDA/IC Design ]

• SH7147: Control Area Network (RCAN-ET) Communication (2008-05-23) [ Embedded Systems ]
• Quartz crystal oscillator implementation with PolarPro and Eclipse II (2008-05-23) [ Test/Packaging ]
• Interfacing LVPECL devices to QuickLogic Eclipse and Eclipse-II FPGAs (2008-05-22) [ Programmable Logic ]
• Interfacing the FLEx72 18Mbit synchronous dual-port RAM to the TI TMS320C641x DSPs (2008-05-22) [ Digital Signal Processing ]
• Integrating an I2C bootloader into a PSoC Express project (2008-05-22) [ Embedded Systems ]

• Industrial stepper motor driver (2008-05-22) [ Embedded Systems ]
• Implementing depth expansion with the Cypress FLEx72 18Mbit dual-port RAM (2008-05-22) [ Buffer/Storage ]
• HSB operation in nvSRAMs (2008-05-22) [ Buffer/Storage ]
• EZ-USB FX2/AT2/SX2 reset and power considerations (2008-05-22) [ Interface Design ]
• Design aids&#8212;multicontext switch event kernel (2008-05-22) [ Embedded Systems ]

• Using C and a timer to interface 8051 MCUs with UNI/O bus-compatible serial EEPROMs (2008-05-21) [ Buffer/Storage ]
• 3.3V/20A post-regulator driven by the NCP4331 (2008-05-20) [ Power Design ]
• Calculating memory system power for DDR3 (2008-05-19) [ Buffer/Storage ]
• Calculating memory system power for DDR3 (2008-05-19) [ Buffer/Storage ]
• Connection diagrams interfacing the MoBL-USBTM FX2LP18 to mobile handset applications and baseband processors (2008-05-16) [ Interface Design ]

• Automatic system for IC characterization: The DC approach (2008-05-16) [ Test/Packaging ]
• Using C and a timer to interface MSP430 MCUs with UNI/O bus-compatible serial EEPROMs (2008-05-16) [ Buffer/Storage ]
• New formula to speed up PCB designs (2008-05-16) [ EDA/IC Design ]
• Cut down processor power consumption with CPLD (2008-05-16) [ Power Design ]
• Optimize system performance with PCIe (2008-05-16) [ Networking Design ]

• Ease automotive graphics design (2008-05-16) [ Programmable Logic ]
• Booting from embedded MMC (2008-05-15) [ Buffer/Storage ]
• Design challenges of switching LED drivers (2008-05-14) [ Optical Electronics and Display ]
• Demonstration/evaluation tool for CAT4016 16-channel constant-current LED driver (2008-05-13) [ Optical Electronics and Display ]
• CAT4201 LED driver evaluation board (2008-05-13) [ Optical Electronics and Display ]

• Micron ECC module for NAND flash via Xilinx Spartan-3 FPGA (2008-05-13) [ Programmable Logic ]
• Demonstration/evaluation board for CAT3643/3644 quad-mode LED driver (2008-05-12) [ Optical Electronics and Display ]
• CAT3636DB1 evaluation/demo board for CAT3636 6-channel quad-mode LED driver (2008-05-12) [ Optical Electronics and Display ]
• CAT4238EVAL1 evaluation board for CAT4238 10-LED boost converter (2008-05-12) [ Optical Electronics and Display ]
• CAT3612EVAL1 evaluation board for CAT3612 camera flash LED driver (2008-05-12) [ Optical Electronics and Display ]

• CAT3626DB1 evaluation/demo board for CAT3626 6-channel LED driver (2008-05-12) [ Optical Electronics and Display ]
• DDR3 dynamic on-die termination (2008-05-12) [ Buffer/Storage ]
• EV-128 AAT3174 Eval: High-current, high-efficiency charge pump (2008-05-09) [ Optical Electronics and Display ]
• AAT1230 Eval: 18V/10V 100mA boost converter (2008-05-09) [ Amplifying/Conditioning/Converting ]
• AAT1231 Eval: Step-up DC/DC converter for white LED backlight apps (2008-05-09) [ Optical Electronics and Display ]

• AAT4295 Eval: Single RGB controller (2008-05-09) [ Optical Electronics and Display ]
• AAT4297 Eval: Dual RGB controller (2008-05-09) [ Optical Electronics and Display ]
• Using the dsPIC30F for vector control of an ACIM (2008-05-09) [ Control Design ]
• AAT1299 Eval: Low-voltage 2MHz step-up DC/DC converter (2008-05-08) [ Amplifying/Conditioning/Converting ]
• AAT1217 Eval: 1.2MHz, 600mA micropower synchronous step-up converter (2008-05-08) [ Amplifying/Conditioning/Converting ]

• AAT4674/4674-1 Eval: Power supply selector switch (2008-05-08) [ Networking Design ]
• AAT1210 Eval: High-power DC/DC boost converter with optional dynamic voltage programming (2008-05-08) [ Amplifying/Conditioning/Converting ]
• AAT3192/93: Low-cost, 2/3-channel charge-pump LED drivers (2008-05-08) [ Optical Electronics and Display ]
• USB HID class on an embedded device (2008-05-08) [ Interface Design ]
• Thermal simulation of power MOSFETs on the P-Spice platform (2008-05-08) [ EDA/IC Design ]

• Power MOSFET basics: Understanding gate charge and using it to assess switching performance (2008-05-08) [ Embedded Systems ]
• Current-sensing power MOSFETs (2008-05-08) [ Sensor Technology ]
• Power MOSFET basics: Understanding MOSFET characteristics associated with the figure of merit (2008-05-08) [ EDA/IC Design ]
• DC-to-DC design guide (2008-05-08) [ Embedded Systems ]
• Designing with LITTLE FOOT power MOSFETs in surface-mount (SO-8) packages (2008-05-08) [ Power Design ]

• LITTLE FOOT TSSOP-8: The next step in surface-mount power MOSFETs (2008-05-08) [ Test/Packaging ]
• EV-122 AAT3175 Eval: High-efficiency 1X/1.5X/2X charge pump for white LED flash apps (2008-05-07) [ Optical Electronics and Display ]
• EV-123 AAT4296 Eval: Five-channel push/pull I/O expander with serial control (2008-05-07) [ Interface Design ]
• EV-124 AAT3681: USB Port or AC adapter Li-ion/polymer battery charger (2008-05-07) [ Interface Design ]
• EV-125 I&#178;C/S2Cwire controller with AAT1142 demo board (2008-05-07) [ Interface Design ]

• AAT3172 Eval: High-current LED flash driver charge pump IC (2008-05-07) [ Optical Electronics and Display ]
• Using Micron MT29F2G08AACWP NAND flash memory in Toshiba TC58NVG1S3BTG00 apps (2008-05-07) [ Buffer/Storage ]
• Four key steps to design a continuous conduction mode PFC stage using the NCP1654 (2008-05-06) [ Power Design ]
• 700mA LED power supply using monolithic controller, off-line current boosted buck converter (2008-05-05) [ Optical Electronics and Display ]
• AAT2830/31 Eval: 800mA total display solution for portable devices (2008-05-05) [ Optical Electronics and Display ]

• AAT2833/34 Eval: 240mA total display solution for portable devices (2008-05-05) [ Optical Electronics and Display ]
• AAT2847 Eval: 4-channel backlight driver with dual LDOs (2008-05-05) [ Optical Electronics and Display ]
• AAT1275 Eval: Boost converter with USB power switch (2008-05-05) [ Interface Design ]
• AAT1239-1 Eval: Step-up DC/DC converter for white LED backlight applications (2008-05-05) [ Optical Electronics and Display ]
• Using a timer and I/O pins to interface 8051 MCUs with I&#178;C serial EEPROMs (2008-05-02) [ Buffer/Storage ]

• Interfacing baseline PIC MCUs with UNI/O bus-compatible serial EEPROMs (2008-05-01) [ Buffer/Storage ]
• Accurate power measurement in communications systems (2008-05-01) [ Design Test ]
• Save energy with next generation IGBTs (2008-05-01) [ Power Design ]
• Exceeding the standard for wireless sensor networks (2008-05-01) [ RF/Wireless ]
• Use analog for better performance-to-power ratios (2008-05-01) [ Power Design ]

• Sign-off smartly with SSTA (2008-05-01) [ EDA/IC Design ]
• Row boundary crossing functionality in CellularRAM memory (2008-04-30) [ Buffer/Storage ]
• Automatic detection of USB port vs. wall adapter power (2008-04-29) [ Interface Design ]
• Ripple and noise measurements with DC/DC switch-mode power supplies (2008-04-29) [ Design Test ]
• AAT3172 flash programming techniques using the AS&#178;Cwire serial interface (2008-04-29) [ Buffer/Storage ]

• Automatic Charge Reduction (CHR) function solves issues with Li-ion battery charging from USB ports (2008-04-29) [ Interface Design ]
• USB device stack for PIC32 programmer's guide (2008-04-29) [ Interface Design ]
• USB mass storage class on an embedded host (2008-04-28) [ Buffer/Storage ]
• Basic application loading over the serial interface for the DaVinci TMS320DM644x (2008-04-25) [ Interface Design ]
• TMS320DM6441 power consumption summary application report (2008-04-25) [ Embedded Systems ]

• Compact flash (CF) support on the DVEVM (2008-04-25) [ Buffer/Storage ]
• Using static IP between Linux host and the DVEVM (2008-04-25) [ EDA/IC Design ]
• Running Demo via ddd on the DVEVM (2008-04-25) [ Embedded Systems ]
• Motion JPEG demo on TMS320DM6446 (Rev. A) (2008-04-25) [ Digital Signal Processing ]
• TMS320DM6467 power consumption summary (2008-04-25) [ Power Design ]

• Using the TMS320DM6467 DMSoC Bootloader (Rev. A) (2008-04-25) [ Embedded Systems ]
• Implementing DDR2 PCB layout on the TMS320DM646x (Rev. A) (2008-04-25) [ Digital Signal Processing ]
• USB 2.0 board design and layout guidelines (2008-04-25) [ Embedded Systems ]
• LED driving with NCP/V3063 (2008-04-25) [ Optical Electronics and Display ]
• Interfacing the MCP2122 to the host controller (2008-04-24) [ Control Design ]

• How to maintain USB signal integrity when adding ESD protection (2008-04-23) [ EDA/IC Design ]
• Programming Windows XP for embedded IR applications (2008-04-22) [ Optical Electronics and Display ]
• Xenon flash application design based on NCP5080 integrated with IGBT driver and photo sense function (2008-04-21) [ Optical Electronics and Display ]
• High intensity LED drivers using NCP3065/NCV3065 (2008-04-18) [ Optical Electronics and Display ]
• Utilizing a white LED driver to cost-effectively drive power-limited xenon flashes in digital cameras, camera Phones (2008-04-17) [ Optical Electronics and Display ]

• NCP101x LED flasher with Luxeon V Star LED (2008-04-16) [ Optical Electronics and Display ]
• Understand 3G LTE testing challenges (2008-04-16) [ Design Test ]
• Manage Li-ion batteries for portable devices (2008-04-16) [ Digital Signal Processing ]
• Guarantee quality in voice engine design (2008-04-16) [ Digital Signal Processing ]
• Tips on implementing negative buck topology (2008-04-16) [ Power Design ]

• The LCD TVs standby power consumption reduction (2008-04-15) [ Power Design ]
• Calibrating the ADC08xxxx family of ultra high-speed converters (2008-04-14) [ Amplifying/Conditioning/Converting ]
• Designing energy-efficient handheld illumination solutions (2008-04-11) [ Optical Electronics and Display ]
• Bluetooth antenna design (2008-04-10) [ RF/Wireless ]
• Using Microchip's micropower LDOs (2008-04-09) [ Power Design ]

• USB CDC class on an embedded device (2008-04-08) [ Interface Design ]
• PIC18F2520 MCP3909 3-phase energy meter reference design (2008-04-07) [ Design Test ]
• Switch mode power supply topologies (Part I) (2008-04-04) [ Power Design ]
• Achieving higher ADC resolution using oversampling (2008-04-03) [ Amplifying/Conditioning/Converting ]
• Precision RTD instrumentation for temperature sensing (2008-04-02) [ Sensor Technology ]

• Using a USB flash drive with an embedded host (2008-04-01) [ Buffer/Storage ]
• Reduce EMI with proper SI design (2008-04-01) [ EDA/IC Design ]
• Multiply efficiently in wireless base stations (2008-04-01) [ Programmable Logic ]
• Drive your large LCD with PPDS (2008-04-01) [ Optical Electronics and Display ]
• Re-architecting GPS for mobile phones (2008-04-01) [ RF/Wireless ]

• Developing mechatronic systems (2008-04-01) [ Buffer/Storage ]
• Using C30 compiler and the SPI module to interface EEPROMs with dsPIC33F and PIC24F (2008-03-31) [ Buffer/Storage ]
• LM5015 non-isolated two-switch DC/DC regulator evaluation board (2008-03-28) [ Power Design ]
• Powering and dimming high-brightness LEDs with the LM3405 constant-current buck regulator (2008-03-27) [ Optical Electronics and Display ]
• Op amp precision design: DC errors (2008-03-26) [ Amplifying/Conditioning/Converting ]

• USB generic function on an embedded device (2008-03-25) [ Interface Design ]
• USB mass storage class on an embedded device (2008-03-24) [ Buffer/Storage ]
• Managing EMI in Class D audio applications (2008-03-21) [ EMI/EMC Design ]
• Using the Mindi power management simulator tool (2008-03-20) [ EDA/IC Design ]
• Sensorless brushless DC motor control with PIC16 (2008-03-19) [ Control Design ]

• LM274X reference designs (2008-03-18) [ Power Design ]
• LM1771 and LM3880 based FPGA power supply reference design (2008-03-17) [ Programmable Logic ]
• Calibrate accelerometers for industrial apps (2008-03-17) [ Design Test ]
• Technologies boost virtual instrumentation (2008-03-17) [ Design Test ]
• Implement OFDMA, MIMO for WiMAX, LTE (2008-03-17) [ RF/Wireless ]

• Address the power design challenges of DTV (2008-03-17) [ Power Design ]
• Dual DC/DC buck regulators with dual low-noise linear regulators (2008-03-14) [ Power Design ]
• Attachment methods for the electro-mechanical SFN package (2008-03-13) [ Test/Packaging ]
• Thermal considerations for a UCSP package