• Establishing design trade-offs for DFM (2001-07-01) [ EDA/IP ]
• Dimensioning and tolerancing (2001-07-01) [ EDA/IP ]
• Quadrature-encoded position and beyond (2001-07-01) [ Processors/DSPs ]
• EMI vs. IC technology (2001-07-01) [ Amplifiers/Converters ]
• Constructing H.323 stacks for VoIP designs (2001-07-01) [ Amplifiers/Converters ]

• DFM guidelines for through-hole technology (2001-07-01) [ EDA/IP ]
• High-availability systems boost network uptime: Part 1 (2001-07-01) [ Networks ]
• Solution space analysis for high-speed design (2001-06-22) [ EDA/IP ]
• PCB design and manufacturing metrics (2001-06-22) [ Amplifiers/Converters ]
• Field solvers and PCB stack up analysis: Comparing measurements and modeling (2001-06-19) [ EDA/IP ]

• Inductance analysis of chip scale packages (2001-06-19) [ Amplifiers/Converters ]
• ESD precautions for ANADIGICS GaAs MMIC users (2001-06-19) [ Amplifiers/Converters ]
• Transimpedance amplifiers (2001-06-19) [ Amplifiers/Converters ]
• CATV reverse amp with step attenuator (2001-06-19) [ Amplifiers/Converters ]
• Downconverter MMIC for CATV (2001-06-19) [ Amplifiers/Converters ]

• What is characteristic impedance? (2001-06-19) [ Amplifiers/Converters ]
• What really is inductance? (2001-06-19) [ Amplifiers/Converters ]
• Increasing pump efficiency for natural gas processing with high-accuracy frequency transmitter (2001-06-19) [ Amplifiers/Converters ]
• Using Chariot for switch and router performance testing (2001-06-18) [ T&M ]
• The synergy of Chariot and protocol analyzers (2001-06-18) [ T&M ]

• Detecting mine explosions with rate-of-change alarms for quick emergency response (2001-06-18) [ Sensors/MEMS ]
• Testing the performance of multiple TCP/IP stacks (2001-06-18) [ Networks ]
• Three rules to follow for successful Chariot testing (2001-06-18) [ Networks ]
• Testing dial-up networking with Chariot (2001-06-18) [ Networks ]
• Chariot support for QoS in TCP/IP (2001-06-18) [ Networks ]

• Running Chariot tests longer than 99 hours (2001-06-18) [ Embedded ]
• Evaluating Chariot (2001-06-18) [ Embedded ]
• Using the Chariot TCL API to create a Chariot test (2001-06-18) [ Embedded ]
• Chariot command-line programs (2001-06-18) [ Embedded ]
• Chariot and IP multicast (2001-06-18) [ Networks ]

• Benchmarking and tuning VPNs with Chariot (2001-06-18) [ Networks ]
• Isolating software: Configured field devices for safety (2001-06-18) [ Amplifiers/Converters ]
• Performing computation functions with signal conditioners (2001-06-18) [ Amplifiers/Converters ]
• Designing a next-generation voice gateway (2001-06-16) [ Processors/DSPs ]
• Designing Internet audio players using FPGAs (2001-06-16) [ Optoelectronics/Displays ]

• UltraVia thin-film substrate for advanced BGA apps (2001-06-16) [ Manufacturing/Packaging ]
• Powering up 3G handsets for MPEG-4 video (2001-06-16) [ Processors/DSPs ]
• Two mysteries of PCB thermal analysis (2001-06-16) [ EDA/IP ]
• Bonding, handling and mounting procedures for Millimeterwave p-HEMT MMICs (2001-06-15) [ Manufacturing/Packaging ]
• Logic buffered delay modules (2001-06-15) [ FPGAs/PLDs ]

• The choice of polarization—Indoor picocell antennas (2001-06-15) [ RF/Microwave ]
• GPS antenna considerations for automotive applications (2001-06-15) [ RF/Microwave ]
• Packages & packaging (2001-06-15) [ Manufacturing/Packaging ]
• Using team design for large FPGAs (2001-06-15) [ EDA/IP ]
• Surface mounting instructions CR-9, 11, 12, 13, 14 ceramic 16 and 24 PIN packages (2001-06-15) [ Manufacturing/Packaging ]

• CR-15 package handling and mounting procedure (2001-06-15) [ Manufacturing/Packaging ]
• Creating more efficient scripts for LeonardoSpectrum (2001-06-15) [ EDA/IP ]
• Powerful low-cost synthesis for Actel ProASIC 500K family (2001-06-15) [ EDA/IP ]
• Electromagnetic delay lines (2001-06-15) [ Amplifiers/Converters ]
• Programming guide integer N PLL synthesizer 35- to 1,100MHz (2001-06-15) [ Amplifiers/Converters ]

• Pulse transformers (2001-06-15) [ Amplifiers/Converters ]
• Techniques to achieve high-isolation with GaAs MMIC switch chips (2001-06-15) [ Amplifiers/Converters ]
• Thyristors used as ac switches and relays (2001-06-15) [ Amplifiers/Converters ]
• Testing Teccor semiconductor devices using curve tracers (2001-06-14) [ T&M ]
• Assembly and soldering recommendations (2001-06-14) [ Manufacturing/Packaging ]

• SUPERECTIFIER design brings new level of reliability to surface mount components (2001-06-14) [ Amplifiers/Converters ]
• TRANSZORB TVS selection: Unidirectional vs. Bidirectional (2001-06-14) [ Amplifiers/Converters ]
• Failure modes and fusing of TVS devices (2001-06-14) [ Amplifiers/Converters ]
• GS rectifiers in SMPS using the Topswitch integrated circuit (2001-06-14) [ Amplifiers/Converters ]
• Analog line card circuit protection (2001-06-14) [ Amplifiers/Converters ]

• Explanation of maximum ratings for thyristors (2001-06-14) [ Amplifiers/Converters ]
• Surface mount soldering considerations (2001-06-14) [ Manufacturing/Packaging ]
• Phase control using thyristors (2001-06-14) [ Amplifiers/Converters ]
• Using rectifiers in voltage multiplier circuits (2001-06-14) [ Amplifiers/Converters ]
• Surface mount low capacitance TVS: The discrete solution (2001-06-14) [ Amplifiers/Converters ]

• Silicon Zener diodes (2001-06-14) [ Amplifiers/Converters ]
• Selecting the optimum transient voltage suppressor (2001-06-14) [ Amplifiers/Converters ]
• High-speed rectifier applications in high-end audio (2001-06-14) [ Amplifiers/Converters ]
• TVS placement the critical path to the leading edge (2001-06-13) [ Amplifiers/Converters ]
• Protecting for repetitive transient voltages (2001-06-13) [ Amplifiers/Converters ]

• What is a silicon transient voltage suppressor? And how does it work? (2001-06-13) [ Amplifiers/Converters ]
• Using the power versus time curve (2001-06-13) [ Amplifiers/Converters ]
• Determining clamping voltage levels for a broad range of pulse currents (2001-06-13) [ Amplifiers/Converters ]
• High-speed data line protection (2001-06-13) [ Amplifiers/Converters ]
• Protecting low current loads in harsh electrical environments (2001-06-13) [ Amplifiers/Converters ]

• Paralleling transient voltage suppressors for higher power capability (2001-06-13) [ Amplifiers/Converters ]
• Series stacking of TVS for higher voltages and power (2001-06-13) [ Amplifiers/Converters ]
• Effect of lead wire lengths on protector clamping voltages (2001-06-13) [ Amplifiers/Converters ]
• Design guidelines for Schottky rectifiers (2001-06-13) [ Amplifiers/Converters ]
• Hardening power supplies to line voltage transients (2001-06-13) [ Amplifiers/Converters ]

• Power factor correction with Ultrafast diodes (2001-06-13) [ Amplifiers/Converters ]
• Automotive transient voltage suppressor (2001-06-13) [ Amplifiers/Converters ]
• Transient suppressors, a competitive look (2001-06-13) [ Amplifiers/Converters ]
• Interfacing the X24165/645 to 8051 microcontrollers (2001-06-12) [ Memory/Storage ]
• Interfacing the X5043 watchdog timer to Hitachi H8/3000 microcontrollers (2001-06-12) [ Memory/Storage ]

• Interfacing to Xicor's X84641/129 MPS EEPROMs (2001-06-12) [ Memory/Storage ]
• Interfacing the Xicor X5163/323/643 CPU supervisors to NEC 78K microcontrollers (2001-06-12) [ Memory/Storage ]
• Interfacing the X24165/645 to the Motorola 68HC11 microcontroller (2001-06-12) [ Memory/Storage ]
• Interfacing Xicor SPI serial memories to Hitachi H8/3000 microcontrollers (2001-06-12) [ Memory/Storage ]
• Interfacing 2-wire serial memories to Hitachi H8/3000 microcontrollers (2001-06-12) [ Memory/Storage ]

• Interface software for Xicor SPI serial memories (2001-06-12) [ Memory/Storage ]
• Improving analog signal monitors with XDCPs (2001-06-12) [ Amplifiers/Converters ]
• Understanding the Xicor 3-wire XDCP interface (2001-06-12) [ Amplifiers/Converters ]
• Evaluation circuits for XDCP (2001-06-12) [ Amplifiers/Converters ]
• Block lock and programmable hardware write protection for Xicor's 2-wire serial devices (2001-06-12) [ Memory/Storage ]

• Mounting and handling of semiconductor devices (2001-06-12) [ Manufacturing/Packaging ]
• Fundamental characteristics of thyristors (2001-06-12) [ Amplifiers/Converters ]
• Gating, Latching and Holding of SCRs and Triacs (2001-06-12) [ Amplifiers/Converters ]
• Interfacing the X25650 to the Motorola 68HC11 microcontroller (2001-06-11) [ Memory/Storage ]
• Interfacing the X25650 to 8051 microcontrollers (2001-06-11) [ Memory/Storage ]

• Serial memory interfaces: Trends and options (2001-06-11) [ Memory/Storage ]
• Using Xicor digitally controlled potentiometers in commercial RF power amplifier applications (2001-06-11) [ Amplifiers/Converters ]
• Power supply and dc to dc converter control using XICOR digitally controlled potentiometers (2001-06-11) [ Amplifiers/Converters ]
• Remotely adjustable voltage regulators using XDCPs (2001-06-11) [ Amplifiers/Converters ]
• Op-amp gain and offset trim using XICOR digitally controlled potentiometers (2001-06-11) [ Amplifiers/Converters ]

• Digital audio amplifier gain control using logarithmic XICOR digitally controlled potentiometers (2001-06-11) [ Amplifiers/Converters ]
• Shaft encoder drives multiple XICOR digitally controlled potentiometers (XDCPs) (2001-06-11) [ Amplifiers/Converters ]
• Programmable on-chip oscillator compensation (2001-06-11) [ Amplifiers/Converters ]
• Interfacing the X9241 XDCPs to 8051 microcontrollers (2001-06-11) [ Amplifiers/Converters ]
• Tone, balance and volume control using a quad XDCP (2001-06-11) [ Amplifiers/Converters ]

• Sensor circuits and digitally controlled potentiometers (2001-06-11) [ Amplifiers/Converters ]
• Programmable Tee Networks (2001-06-11) [ Amplifiers/Converters ]
• Putting analog on the bus (2001-06-11) [ Amplifiers/Converters ]
• Adding a manual reset to Xicor CPU supervisors (2001-06-08) [ Power/Alternative Energy ]
• Designing with Xicor's X5000 series CPU supervisors (2001-06-08) [ Power/Alternative Energy ]

• Interfacing the X9408/X9418 XDCP to 8051 microcontrollers (2001-06-08) [ Embedded ]
• Using the Xicor X5163/X5323/X5643 CPU supervisors with the 68HC11 microcontroller (2001-06-08) [ Controls/MCUs ]
• Smart battery primer (2001-06-08) [ Power/Alternative Energy ]
• Using the Xicor X5165/X5325/X5645 CPU supervisors with the 8051 microcontroller (2001-06-08) [ Controls/MCUs ]
• Interfacing the X84256 MPS E²PROM to 8051 microcontrollers (2001-06-08) [ Memory/Storage ]

• Xicor X1243 real time clock oscillator requirements (2001-06-08) [ Embedded ]
• Real time clock X12xx features & application (2001-06-08) [ Memory/Storage ]
• Interfacing the X84256 MPS E²PROM to the Motorola 68HC11 microcontroller (2001-06-08) [ Memory/Storage ]
• Serial memory interface: The benefits of SPI over I²C and µWire (2001-06-08) [ Memory/Storage ]
• A primer on digitally controlled potentiometers (2001-06-08) [ Amplifiers/Converters ]

• Application of Xicor digitally-controlled potentiometers (XDCP) as Hybrid Analog/Digital (2001-06-08) [ Amplifiers/Converters ]
• A compendium of application circuits for Xicor's digitally-controlled (XDCP) potentiometers (2001-06-08) [ Embedded ]
• Smart batteries and the Xicor X3100 (2001-06-08) [ Amplifiers/Converters ]
• 3D design tools for package flexibility (2001-06-08) [ EDA/IP ]
• HDI and microvia design for high-performance (2001-06-08) [ EDA/IP ]

• Land grid array (LGA) handling, mounting and thermal considerations (2001-06-07) [ Manufacturing/Packaging ]
• Recommended high-volume processing of surface-mount devices (2001-06-07) [ Manufacturing/Packaging ]
• Installing outdoor repeaters (2001-06-07) [ RF/Microwave ]
• Antenna isolation with 850MHz Cellular/AMPS band repeaters (2001-06-07) [ RF/Microwave ]
• Antenna isolation with 1,900MHz PCS band repeaters (2001-06-07) [ RF/Microwave ]

• Using a PCAT keyboard with a TICkit 63/74 (2001-06-07) [ Embedded ]
• Interfacing the X84641/129 MPS E²PROM to 8051 microcontrollers (2001-06-07) [ Memory/Storage ]
• Interfacing the 400kHz X24128 serial EEPROM to 8051 microcontrollers (2001-06-07) [ Memory/Storage ]
• Interfacing the 400kHz X24129 serial EEPROM to the Motorola 68HC11 microcontroller (2001-06-07) [ Memory/Storage ]
• Interfacing the X84129 MPS EEPROM to the Motorola 68HC11 microcontroller (2001-06-07) [ Memory/Storage ]

• Design issues in high-speed SPI (HSSPI) serial EEPROM (2001-06-07) [ Memory/Storage ]
• New features of the X25057 and X25097 (2001-06-07) [ Memory/Storage ]
• PWM in background on the TICkit62 (Fancy example with relay control of direction and braking) (2001-06-07) [ Amplifiers/Converters ]
• Lead-free soldering for the attachment of µBGA packages (2001-06-07) [ Manufacturing/Packaging ]
• Closed loop techniques using a quadrature shaft encoder (2001-06-07) [ Sensors/MEMS ]

• HMC313 biasing and impedance matching techniques (2001-06-06) [ Networks ]
• Blinking an LED on the TICkit 62 (Simple I/O Example) (2001-06-06) [ Processors/DSPs ]
• Handling, mounting, bonding GaAs MMIC die (2001-06-06) [ Manufacturing/Packaging ]
• Getting the most out of the Specctra autorouter (2001-06-06) [ EDA/IP ]
• Layout guidelines for MMIC components (2001-06-06) [ Amplifiers/Converters ]

• MMIC amplifier biasing procedure (2001-06-06) [ Amplifiers/Converters ]
• Introducing Hittite GaAs MMIC mixers (2001-06-06) [ Amplifiers/Converters ]
• HMC143/144 mixer operation note (2001-06-06) [ Amplifiers/Converters ]
• Simple +5Vdc power supply (2001-06-06) [ Power/Alternative Energy ]
• HMC141/142 mixer operation note (2001-06-06) [ Amplifiers/Converters ]

• SXT-289 balanced amplifier configuration (2001-06-06) [ Amplifiers/Converters ]
• SGA-2486 gain flatness compensation circuit (2001-06-06) [ Amplifiers/Converters ]
• Floating ground SPNT MMIC switch driver techniques (2001-06-06) [ Amplifiers/Converters ]
• A user's guide to envelope following analysis (2001-06-06) [ EDA/IP ]
• Handling guidelines for ESD protection of GaAs MMICs (2001-06-06) [ Amplifiers/Converters ]

• Electrical characterization of packages for use with GaAs MMIC amplifiers (2001-06-05) [ Manufacturing/Packaging ]
• Replacement alternatives for the SCA-3/13 (2001-06-05) [ RF/Microwave ]
• Replacing the SCA-4/14 amplifier with a NGA-589 (2001-06-05) [ RF/Microwave ]
• Replacing the SCA-2/12 amplifier with a NGA-689 (2001-06-05) [ null ]
• RF hybrid devices (2001-06-05) [ RF/Microwave ]

• RF balun transformers (2001-06-05) [ RF/Microwave ]
• Power dividers/Combiners (2001-06-05) [ RF/Microwave ]
• RF directional couplers and 3dB hybrids overview (2001-06-05) [ RF/Microwave ]
• SXH-189 new bias scheme (2001-06-05) [ Amplifiers/Converters ]
• SXA/SXT-289 new bias scheme (2001-06-05) [ Amplifiers/Converters ]

• Replacing the SNA-686 amplifier with a NGA-686 (2001-06-05) [ Amplifiers/Converters ]
• Replacing the SNA-586 amplifier with a NGA-586 (2001-06-05) [ Amplifiers/Converters ]
• Replacement alternatives for the SNA-486 (2001-06-05) [ Amplifiers/Converters ]
• SGA-6589 wideband (50-1,000MHz) driver circuit (2001-06-05) [ Amplifiers/Converters ]
• Drivers for GaAs FET MMIC switches and digital attenuators (2001-06-05) [ Amplifiers/Converters ]

• Designing Chebyshev band pass filters (2001-06-04) [ Amplifiers/Converters ]
• Designing a Butterworth low pass filter (2001-06-04) [ Amplifiers/Converters ]
• Optimum PCB and stencil layout for leadframe MLPs (2001-06-04) [ EDA/IP ]
• Printed circuit board design for LSM1 VCOs (2001-06-04) [ Amplifiers/Converters ]
• Suggested circuit controller for a dual-control FET VVA in AGC temperature compensation (2001-06-04) [ Amplifiers/Converters ]

• Positive voltage control of GaAs MMIC control devices (2001-06-04) [ Amplifiers/Converters ]
• Intermodulation performance of microwave mixers (2001-06-04) [ Amplifiers/Converters ]
• Designing with the MA02301AF 3.6V 0.5W RF PA for 2.4GHz (2001-06-04) [ RF/Microwave ]
• Using microwave mixers as phase detectors (2001-06-04) [ Amplifiers/Converters ]
• Using MMICAD to synthesize single and coupled transmission lines (2001-06-04) [ Amplifiers/Converters ]

• Reflow soldering conditions for VCO and synthesizer products (2001-06-04) [ Amplifiers/Converters ]
• High-volume commercial plastic packaged GaAs monolithic devices (2001-06-04) [ Amplifiers/Converters ]
• Installation and application information for dual directional coupler with lightning protection (2001-06-04) [ RF/Microwave ]
• Tape and reel packaging for LSM2 VCOs (2001-06-04) [ Amplifiers/Converters ]
• Tape and reel packaging for LSM1A VCOs (2001-06-04) [ Amplifiers/Converters ]

• Using OrCAD for schematic capture from MMICAD (2001-06-01) [ EDA/IP ]
• Configuring OrCAD for schematic capture from MMICAD (2001-06-01) [ EDA/IP ]
• Maximizing your productivity (2001-06-01) [ Memory/Storage ]
• Yield forecasting of active microwave devices (2001-06-01) [ Amplifiers/Converters ]
• Conditional optimization using MMICAD (2001-06-01) [ Embedded ]

• Technology-level simulation of active microwave circuits (2001-06-01) [ Amplifiers/Converters ]
• Running MMICAD under Windows 3.1 (2001-06-01) [ Memory/Storage ]
• User defined outputs and optimization goals in MMICAD (2001-06-01) [ Amplifiers/Converters ]
• Variational analysis using MMICAD (2001-06-01) [ Amplifiers/Converters ]
• Computer aided design of MMIC variable attenuators (2001-06-01) [ Amplifiers/Converters ]

• Design of voltage controlled oscillators with MMICAD (2001-06-01) [ Amplifiers/Converters ]
• Computer aided testing with MMICAD (Series #3: Using MMICAD to control programmable power supplies & other control devices) (2001-06-01) [ T&M ]
• Computer aided testing with MMICAD (Series #1: Setup and configuration) (2001-06-01) [ T&M ]
• Computer aided testing with MMICAD [Series #4: Automated data acquisition from an automatic network analyzer (ANA) and programmable power supplies] (2001-06-01) [ Amplifiers/Converters ]
• Computer aided testing with MMICAD [Series #2: Data acquisition from an automatic network analyzer (ANA)] (2001-06-01) [ Amplifiers/Converters ]

• How to maintain registration of buildup microvias (2001-06-01) [ Manufacturing/Packaging ]
• Turbo charging next-generation wireless, optical systems (2001-06-01) [ Networks ]
• Formal verification of an MPEG decoder chip (2001-06-01) [ Amplifiers/Converters ]
• Practical DFT leads to highly testable ASICs (2001-06-01) [ T&M ]
• The new century of high-density functional circuits (2001-06-01) [ Manufacturing/Packaging ]

• Simulation reveals embedded-algorithm behavior (2001-06-01) [ Memory/Storage ]
• Using MMICAD to calculate minimum noise measure (2001-05-31) [ Amplifiers/Converters ]
• Monte Carlo yield analysis using MMICAD (2001-05-31) [ EDA/IP ]
• Noise analysis in MMICAD (2001-05-31) [ Amplifiers/Converters ]
• User-defined models in MMICAD (2001-05-31) [ EDA/IP ]

• Parameter mode in MMICAD (2001-05-31) [ EDA/IP ]
• De-embedding using MMICAD (2001-05-31) [ EDA/IP ]
• Configuring your PC for optimal speed with MMICAD (2001-05-31) [ Memory/Storage ]
• Using MMICAD to design lumped element diplexers (2001-05-31) [ Amplifiers/Converters ]
• Using a separate computer for plotting (2001-05-31) [ EDA/IP ]

• Using MMICAD to design lumped element filters (2001-05-31) [ Amplifiers/Converters ]
• Using MMICAD as a powerful general purpose mathematical solver (Example 1: Solving complex non-linear equations) (2001-05-31) [ Embedded ]
• Using MMICAD to compute Cj(0) (2001-05-31) [ Amplifiers/Converters ]
• Using PARAMETER SWEEP to design a new class of varactor diode (2001-05-31) [ Amplifiers/Converters ]
• Using MMICAD as a powerful general purpose mathematical solver (Example 2: Curve fitting of data points by the least squares method) (2001-05-31) [ Embedded ]

• Using MMICAD as a powerful general purpose mathematical solver (Example 3: Numerical integration, numerical differentiation & custom plots using MMICAD's PARAM mode) (2001-05-31) [ Embedded ]
• Specctra V8.00 node locked installation for Windows 98 (2001-05-30) [ EDA/IP ]
• Specctra 8.0 installation troubleshooting guide (2001-05-30) [ EDA/IP ]
• Specctra V8.00 node locked installation for Windows 95 (2001-05-30) [ EDA/IP ]
• Task swapping graphic problem in Windows (2001-05-30) [ EDA/IP ]

• Running ECO forward annotation from the command line (2001-05-30) [ EDA/IP ]
• Specctra V8.00 node locked installation for Windows NT 4.0 (2001-05-30) [ EDA/IP ]
• Using RS-274X format (2001-05-30) [ EDA/IP ]
• Running two different versions of Master Designer on the same computer (2001-05-30) [ EDA/IP ]
• Printing padstack information on a Unix station using query/padstack (2001-05-30) [ EDA/IP ]

• Using custom solder dots in schematic (2001-05-30) [ EDA/IP ]
• Reverse image film for power planes in P-CAD (2001-05-30) [ EDA/IP ]
• PDIF file reader not creating attributes (2001-05-30) [ EDA/IP ]
• Using page connectors (2001-05-30) [ EDA/IP ]
• Importing OrCAD schematic netlist into P-CAD.doc (2001-05-30) [ EDA/IP ]

• How to make padstacks flip with SMD parts (2001-05-30) [ EDA/IP ]
• Updating value fields in a schematic design (2001-05-29) [ EDA/IP ]
• Moisture effects on the soldering of plastic encapsulated devices (2001-05-29) [ Manufacturing/Packaging ]
• Barebone configuration files to run P-CAD (2001-05-29) [ EDA/IP ]
• SPECCTRA V9.0 node locked installation for Windows (2001-05-29) [ EDA/IP ]

• Generating return stringers (2001-05-29) [ EDA/IP ]
• The exception file in PDIF file reader (2001-05-29) [ EDA/IP ]
• Deleting layers using PDIF and block save (2001-05-29) [ EDA/IP ]
• Database version and master designer version (2001-05-29) [ EDA/IP ]
• Creating an edge connector as a through-hole part (2001-05-29) [ EDA/IP ]

• Creating non-homogeneous parts and symbols (2001-05-29) [ EDA/IP ]
• Creating an external aperture file using an internal aperture file (2001-05-29) [ EDA/IP ]
• Creating mounting holes (2001-05-29) [ EDA/IP ]
• Component pin code convention (2001-05-29) [ EDA/IP ]
• How to clear Flash (2001-05-29) [ EDA/IP ]

• Drivers for GaAs FET switches and digital attenuators (2001-05-29) [ Amplifiers/Converters ]
• A condensed review of spread spectrum techniques for ISM band systems (2001-05-28) [ Networks ]
• 2.4GHz direct sequence wireless LAN cascade analysis (2001-05-28) [ Networks ]
• Hierarchical hints (2001-05-28) [ EDA/IP ]
• Performing engineering change orders (ECOs) (2001-05-28) [ EDA/IP ]

• Loading control characters in ACCEL EDA (2001-05-28) [ EDA/IP ]
• One pin representation to multiple pads (2001-05-28) [ EDA/IP ]
• ACCEL-To-SPECCTRA interface and design language translation (2001-05-28) [ EDA/IP ]
• Importing text from a file into ACCEL SCH or PCB (2001-05-28) [ EDA/IP ]
• Removing ERC and DRC error indicators (2001-05-28) [ EDA/IP ]

• Library creation from ACCEL ASCII netlist (2001-05-28) [ EDA/IP ]
• Displaying alternate views of a symbol (2001-05-28) [ EDA/IP ]
• Storing a view (2001-05-28) [ EDA/IP ]
• Using and understanding ports (2001-05-28) [ EDA/IP ]
• Adding pins to an existing part file using PDIF (2001-05-28) [ EDA/IP ]

• Using the PRISM chipset for low data rate applications (2001-05-28) [ Amplifiers/Converters ]
• ASIC design methodology: PowerCalc tool supplement (2001-05-25) [ Power/Alternative Energy ]
• A software algorithm for implementing automatic power ranging (2001-05-25) [ T&M ]
• Testing to ensure your P-NNI implementations is ready to plug-and-play (2001-05-25) [ T&M ]
• Complementary code keying made simple (2001-05-25) [ Processors/DSPs ]

• Processing gain for Direct Sequence Spread Spectrum communication systems and PRISM (2001-05-25) [ Networks ]
• Philips PLDs support live insertion applications (2001-05-25) [ FPGAs/PLDs ]
• A flexible waveform generator using OmniSys and instrumentation (2001-05-25) [ T&M ]
• A guideline for designing external dc bias circuits (2001-05-25) [ Power/Alternative Energy ]
• Accurate and efficient c-v measurements (2001-05-25) [ T&M ]

• Characterization report on 155Mbps single mode fiber transceiver for ATM, SONET OC3/SDH STM-1 (2001-05-25) [ Networks ]
• Accurate characterization of source Spectra using an optical spectrum analyzer (2001-05-25) [ T&M ]
• Fast, faster, fastest! Optimized diodes for switching applications (2001-05-25) [ Amplifiers/Converters ]
• ASIC I/O test considerations (2001-05-25) [ T&M ]
• Quality and reliability (2001-05-25) [ T&M ]

• New packages for pressure mounting (2001-05-25) [ T&M ]
• Using PrimeTime in LSI Logic's FlexStream design flow (2001-05-24) [ EDA/IP ]
• Using formality in LSI Logic's FlexStream design flow (2001-05-24) [ EDA/IP ]
• Choosing the appropriate component from data sheet ratings and characteristics (2001-05-24) [ Amplifiers/Converters ]
• Simple system interface for UltraNAND Flash (2001-05-24) [ Memory/Storage ]

• Designing with the SP505, SP506, & SP507 multi-protocol serial transceivers (2001-05-24) [ Networks ]
• Interfacing the Am29PL160 to the Motorola Coldfire processor (2001-05-24) [ Memory/Storage ]
• SP504/505 evaluation board manual (2001-05-24) [ Networks ]
• Utilizing 3V Flash in 5V systems (2001-05-24) [ Memory/Storage ]
• Connecting AMD Flash memory to a system address bus (2001-05-24) [ Memory/Storage ]

• Using formality for RTL-to-gate in LSI Logic's FlexStream design flow (2001-05-24) [ EDA/IP ]
• Migrating between boot and uniform sectored Flash devices (2001-05-24) [ Memory/Storage ]
• Unlocking the secrets of bypass mode (2001-05-24) [ Memory/Storage ]
• Reset pin circuitry for Flash memory sector protection management (2001-05-24) [ Memory/Storage ]
• Electrical behavior of a new gallium arsenide power Schottky diode (2001-05-24) [ Amplifiers/Converters ]

• Using Multibit register inference to save area and power (2001-05-24) [ EDA/IP ]
• Texas Instruments TMS320VC5409/5421 DSP to PCI Bus (2001-05-23) [ Processors/DSPs ]
• DSP/BIOS II sizing guidelines for the TMS320C54x DSP (2001-05-23) [ Processors/DSPs ]
• Upgrading applications to DSP/BIOS II (2001-05-23) [ Processors/DSPs ]
• Data encryption standard (DES) implementation on the TMS320C6000 (2001-05-23) [ Processors/DSPs ]

• TMS320C54x application code examples (2001-05-23) [ Processors/DSPs ]
• How to get started with DSP/BIOS II (2001-05-23) [ Processors/DSPs ]
• Implementation of a WCDMA rake receiver on a TMS320C62x DSP device (2001-05-23) [ Processors/DSPs ]
• TMS320C6000 expansion bus: Multiple DSP to i80960Kx/Jx microprocessor interface (2001-05-23) [ Processors/DSPs ]
• How to begin development today with the high-performance floating-point TMS320C67x DSP (2001-05-23) [ Processors/DSPs ]

• Writing flexible device drivers for DSP/BIOS II (2001-05-23) [ Processors/DSPs ]
• Using boundary scan on the TMS320VC5441 (2001-05-23) [ Processors/DSPs ]
• Migrating from TMS32VC5409 to TMS32VC5416 (2001-05-23) [ Processors/DSPs ]
• TMS320C6000 integer division (2001-05-23) [ Processors/DSPs ]
• The Residu implementation using the TMS320C6000 (2001-05-23) [ Processors/DSPs ]

• Real-time DSP software design for a portable MP3 Player on a Texas Instruments TMS320C54x DSP Using DSP/BIOS (2001-05-23) [ Processors/DSPs ]
• Building DSP/BIOS programs in UNIX (2001-05-22) [ Processors/DSPs ]
• DSP/BIOS II timing benchmarks on the TMS320C6000 DSP (2001-05-22) [ Processors/DSPs ]
• Introduction to code composer studio plugins (2001-05-22) [ Memory/Storage ]
• Understanding Basic DSP/BIOS Features (2001-05-22) [ Processors/DSPs ]

• DSP/BIOS II timing benchmarks on the TMS320C54x DSP (2001-05-22) [ Processors/DSPs ]
• TMS320C54x arithmetic and logical operations (2001-05-22) [ Processors/DSPs ]
• Implementing a software UART on the TMS320C54x with the McBSP and DMA (2001-05-22) [ Processors/DSPs ]
• Interfacing TLC320AC01 to the TMS320C54x serial port (2001-05-22) [ Processors/DSPs ]
• TMS320C54x system performance (2001-05-22) [ Processors/DSPs ]

• TMS320C54x digital filters (2001-05-22) [ Processors/DSPs ]
• Using boundary scan on the TMS302VC5421 DSP (2001-05-22) [ Processors/DSPs ]
• Memory alias disambiguation on the TMS320C6000 (2001-05-22) [ Processors/DSPs ]
• Low-power real-time programmable DSP development platform for digital hearing aids (2001-05-22) [ Processors/DSPs ]
• Implementation of G.729 on the TMS320C54x (2001-05-22) [ Processors/DSPs ]

• Efficient implementation of real-valued FIR filters on the TMS320C55x DSP (2001-05-22) [ Processors/DSPs ]
• Web without wires (2001-05-22) [ RF/Microwave ]
• Choosing capacitors for reliable automotive applications (2001-05-22) [ Amplifiers/Converters ]
• Synchronous rectification to enhance dc-dc converter design (2001-05-22) [ Power/Alternative Energy ]
• Inter-gateway protocols enable IP telephony (2001-05-22) [ Amplifiers/Converters ]

• Fighting jitter in Fiber Channel designs (2001-05-22) [ Networks ]
• TMS320C6000 µ-Law and a-Law companding with software or the McBSP (2001-05-21) [ Processors/DSPs ]
• Interfacing TMS320C5000 DSP to MSP430 mixed signal microcontroller (2001-05-21) [ Processors/DSPs ]
• TMS320C6000 expansion bus host port-performance (2001-05-21) [ Processors/DSPs ]
• TMS320C6000 DSP expansion bus: Multiple DSP connection using asynchronous host mode (2001-05-21) [ Processors/DSPs ]

• TMS320C62x self-check program applications brief: Version 1.0 (2001-05-21) [ Embedded ]
• Porting a SPOX-KNL V2.2 application to DSP/BIOS II (2001-05-21) [ Processors/DSPs ]
• Circular buffering in TMS320C6000 (2001-05-21) [ Processors/DSPs ]
• Power drive protection interrupt on the TMS320C24x (2001-05-21) [ Processors/DSPs ]
• TMS320C6000 and TMS320C54x McBSP features summary (2001-05-21) [ Processors/DSPs ]

• Implementing a MAP decoder for cdma2000 turbo codes on a TMS320C62x DSP device (2001-05-21) [ Processors/DSPs ]
• TMS320VC5409 bootloader technical reference (2001-05-21) [ Processors/DSPs ]
• Multichannel assembly code processing on C5000 DSP family devices (2001-05-21) [ Processors/DSPs ]
• GSM adaptive multi-rate voice coding on the TMS320C62x DSP (2001-05-21) [ Processors/DSPs ]
• GSM mixed-rate voice coding on the TMS320C62x DSP (2001-05-21) [ Processors/DSPs ]

• TMS320VC5420 to TMS320VC5421 DSP migration (2001-05-21) [ Processors/DSPs ]
• TMS320F240 DSP solution for obtaining resolver angular position and speed (2001-05-18) [ Processors/DSPs ]
• TMS320VC5402 and TMS320UC5402 bootloader (2001-05-18) [ Processors/DSPs ]
• General guide to implement logarithmic and exponential operations on a fixed-point DSP (2001-05-18) [ Processors/DSPs ]
• A block floating point implementation on the TMS320C54x DSP (2001-05-18) [ Processors/DSPs ]

• Migrating from TMS320VC5410 to TMS320VC5409 (2001-05-18) [ Processors/DSPs ]
• TMS320VC5410 bootloader (2001-05-18) [ Processors/DSPs ]
• Migrating from TMS320VC5410 to TMS320VC5416 (2001-05-18) [ Processors/DSPs ]
• TMS320VC5416 bootloader (2001-05-18) [ Processors/DSPs ]
• Using boundary scan on the TMS320VC5420 (2001-05-18) [ Processors/DSPs ]

• Migrating from TMS320VC549 to TMS320VC5409 (2001-05-18) [ Processors/DSPs ]
• TMS320C6000 McBSP: I²S interface (2001-05-18) [ Processors/DSPs ]
• A variable-speed sensorless drive system for switched reluctance motors (2001-05-18) [ Processors/DSPs ]
• DSP/BIOS and TMS320C54x extended addressing (2001-05-18) [ Processors/DSPs ]
• Migrating from TMS320VC549 to TMS320VC5410 (2001-05-18) [ Processors/DSPs ]

• Implementation of a speed field oriented control of 3-Phase PMSM motor using TMS320F240 (2001-05-18) [ Processors/DSPs ]
• On the implementation of MPEG-4 motion compensation using the TMS320C62x (2001-05-17) [ Processors/DSPs ]
• Interfacing a TMS320C2xx DSP to the TLC320AC01/02 analog-interface circuits (2001-05-17) [ Processors/DSPs ]
• Using the eXpressDSP algorithm standard in a static DSP system (2001-05-17) [ Processors/DSPs ]
• TMS320C6000 McBSP: IOM-2 interface (2001-05-17) [ Processors/DSPs ]

• Interfacing TMS320C20x DSPs to Intel 28Fxxx Flash memories (2001-05-17) [ Memory/Storage ]
• TMS320C6000 multi-channel vocoder technology demonstration kit (2001-05-17) [ Processors/DSPs ]
• Connecting TMS320C54x DSP with Flash memory (2001-05-17) [ Memory/Storage ]
• GSM full-rate voice coding on the TMS320C62xx DSP (2001-05-17) [ Processors/DSPs ]
• GSM half-rate voice coding on the TMS320C62xx DSP (2001-05-17) [ Processors/DSPs ]

• Implementation of Echo control for ITU G.165/DECT on TMS320C62xx processors (2001-05-17) [ Processors/DSPs ]
• Bootloading the TMS320C548 using the BSP in standard mode (2001-05-17) [ Processors/DSPs ]
• Company: Texas Instruments Inc. (2001-05-17) [ Processors/DSPs ]
• Using the eXpressDSP algorithm standard in a dynamic DSP system (2001-05-17) [ Memory/Storage ]
• GSM enhanced full rate speech coder: Multichannel TMS320C62x implementation (2001-05-17) [ Processors/DSPs ]

• G.729/A speech coder: multi-channel TMS320C62x implementation (2001-05-17) [ Processors/DSPs ]
• G.726 ADPCM speech coder: Multi-channel TMS320C62x Implementation (2001-05-16) [ Processors/DSPs ]
• Analysis of filter coefficient precision on LMS algorithm performance for G.165/G.168 echo cancellation (2001-05-16) [ Processors/DSPs ]
• TMS320C6000 multi-channel vocoder technology demonstration kit target side design (2001-05-16) [ Processors/DSPs ]
• TMS320C6000 multi-channel vocoder technology demonstration kit host side design (2001-05-16) [ Processors/DSPs ]

• TMS320C6000 host port to MC68360 interface (2001-05-16) [ Processors/DSPs ]
• TMS320C6000 host port to the i80960 microprocessor interface (2001-05-16) [ Processors/DSPs ]
• 3.3V DSP for digital motor control (2001-05-16) [ Sensors/MEMS ]
• A multi-channel serial port driver using DMA on the TMS320C6000 DSP (2001-05-16) [ Processors/DSPs ]
• TMS320C6000 expansion bus to MPC860 microprocessor interface (2001-05-16) [ Processors/DSPs ]

• A multi-channel/Algorithm implementation on the TMS320C6000 DSP (2001-05-16) [ Processors/DSPs ]
• TMS320C6000 host port to MPC860 interface (2001-05-16) [ Processors/DSPs ]
• Implementation of the double-precision complex FFT for the TMS320C54x DSP (2001-05-16) [ Processors/DSPs ]
• Implementation of a software UART on TMS320C54x using general-purpose I/O pins (2001-05-16) [ Processors/DSPs ]
• G.723.1 dual-rate speech coder: Multichannel TMS320C62x implementation (2001-05-16) [ Processors/DSPs ]

• TMS320C6000 McBSP: Data packing (2001-05-16) [ Processors/DSPs ]
• Getters: Molecular scavengers for packaging (2001-05-16) [ Amplifiers/Converters ]
• Strategies for debugging embedded systems (2001-05-16) [ Embedded ]
• Practical IC design in the sub-wavelength regime (2001-05-16) [ Manufacturing/Packaging ]
• Protocols for real-time Ethernet (2001-05-16) [ Networks ]

• Effective interconnect space reduction formation (2001-05-16) [ Manufacturing/Packaging ]
• TMS320C6000 expansion bus to Intel 80960Kx/Jx microprocessor interface (2001-05-15) [ Processors/DSPs ]
• TMS320C6000 expansion bus to MC68360 microprocessor interface (2001-05-15) [ Processors/DSPs ]
• TMS320C54x interface with SDRAM (2001-05-15) [ Memory/Storage ]
• TMS320C6000 McBSP: AC'97 codec interface (TLC320AD90) (2001-05-15) [ Processors/DSPs ]

• TMS320C6000 expansion bus interface to PCI bus through PLX PCI9080 bridge chip (2001-05-15) [ Processors/DSPs ]
• TMS320C6000 HPI to PCI Interfacing: Using the PLX PCI9050 (2001-05-15) [ Processors/DSPs ]
• Cyclic Redundancy Check Computation: An Implementation Using the TMS320C54x (2001-05-15) [ Processors/DSPs ]
• TMS320C6000 board design: Considerations for debug (2001-05-15) [ Processors/DSPs ]
• Loop partitioning on the TMS320C6x (2001-05-15) [ Processors/DSPs ]

• Space-vector PWM with TMS320C24x/F24x using hardware and software determined switching patterns (2001-05-15) [ Processors/DSPs ]
• Writing interruptible looped code for the TMS320C6x DSP (2001-05-15) [ Processors/DSPs ]
• TMS320C6000 EMIF to TMS320C6000 host port interface (2001-05-15) [ Processors/DSPs ]
• Migrating from the TMS320C203, TMS320LC203 or TMS320F206 to the TMS320LC206/TMS320C206 DSPs (2001-05-15) [ Processors/DSPs ]
• Nested loop optimization on the TMS320C6x (2001-05-15) [ Processors/DSPs ]

• Implementation of an adaptive antenna array using the TMS320C541 (2001-05-15) [ Processors/DSPs ]
• Implementing shared memory interface with a TMS320C54x DSP (2001-05-14) [ Memory/Storage ]
• Interfacing the TMS320C57S host port interface to 80386EX host-processor (2001-05-14) [ Processors/DSPs ]
• Implementing the TMS320C6201/C6701/C6211 HPI boot process (2001-05-14) [ Processors/DSPs ]
• Understanding the CAN controller on the TMS320C24x DSP controller (2001-05-14) [ Processors/DSPs ]

• Designing a multiprocessor C54x platform for voice-over-network applications (2001-05-14) [ Processors/DSPs ]
• TMS320C6000 McBSP interface to a ST-bus device (2001-05-14) [ Processors/DSPs ]
• TMS320F240 DSP-solution for high-resolution position with sin/cos-encoders (2001-05-14) [ Processors/DSPs ]
• Overflow avoidance techniques in cascaded IIR filter implementations on the TMS320 DSP's (2001-05-14) [ Processors/DSPs ]
• Sequential addressing of I/O ports on the TMS320C54x DSP (2001-05-14) [ Processors/DSPs ]

• Driving two three-phase inverters with deadband using the TMS320F240 DSP controller (2001-05-14) [ Processors/DSPs ]
• Loading 23-bit extended symbol addresses into the accumulator on the TMS320C54x DSP (2001-05-14) [ Processors/DSPs ]
• Implementation of vector control for PMSM using the TMS320F240 DSP (2001-05-14) [ Processors/DSPs ]
• Sensorless speed controlled brushless dc drive using the TMS320C242 DSP controller (2001-05-14) [ Processors/DSPs ]
• Handling different interrupts of the TMS320F241, TMS320F243 and TMS320C242 DSPs (2001-05-14) [ Processors/DSPs ]

• Reduced electromagnetic interference (EMI) with the TMS320C24x DSP (2001-05-14) [ Processors/DSPs ]
• V.22 bis modem on fixed-point TMS320C2xx DSPs (2001-05-11) [ Processors/DSPs ]
• A TDM interface for the TMS320C54x DSP (2001-05-11) [ Processors/DSPs ]
• Interfacing the TMS320C6201 to a PCI bus using the AMCC S5933 PCI controller (2001-05-11) [ Processors/DSPs ]
• Extended precision IIR filter design on the TMS320C54x DSP (2001-05-11) [ Processors/DSPs ]

• Programmable double bi-quad filter for tone detection on fixed point DSPs (2001-05-11) [ Processors/DSPs ]
• High-density design with MicroStar BGAs (2001-05-11) [ Manufacturing/Packaging ]
• TMS320C6000 McBSP as a TDM highway (2001-05-11) [ Processors/DSPs ]
• How to interface C and assembly language with the TMS320 floating point C compiler (2001-05-11) [ Processors/DSPs ]
• TMS320C6000 McBSP to voice band audio processor (VBAP) interface (2001-05-11) [ Processors/DSPs ]

• TMS320C6000 McBSP interface to the CS4231A multimedia audio codec (2001-05-11) [ Processors/DSPs ]
• Interrupt handling using extended addressing of the TMS320C54x family (2001-05-11) [ Processors/DSPs ]
• Understanding the TMS320F240 external memory interface (2001-05-11) [ Memory/Storage ]
• Using PWM output as a digital-to-analog converter on a TMS320C240 DSP (2001-05-11) [ Processors/DSPs ]
• TMS320C6000 power consumption summary (2001-05-11) [ Processors/DSPs ]

• Oversampling techniques using the TMS320C24x family (2001-05-11) [ Processors/DSPs ]
• Shared memory interface with the TMS320C54x DSP (2001-05-10) [ Memory/Storage ]
• TMS320C6000 EMIF to external SDRAM/SGRAM interface (2001-05-10) [ Memory/Storage ]
• Implementing color reproduction for the TC236 CCD sensor using the TMS320C2xx DSP (2001-05-10) [ Processors/DSPs ]
• Implementing V.32bis Viterbi decoding on the TMS320C62xx DSP (2001-05-10) [ Processors/DSPs ]

• Point-to-point serial communications using the SPI module of the TMS320F240 DSP controller (2001-05-10) [ Processors/DSPs ]
• Performance analysis of line echo cancellation implementation using TMS320C6201 (2001-05-10) [ Processors/DSPs ]
• Emulation fundamentals for TI's DSP solutions (2001-05-10) [ Processors/DSPs ]
• TMS320C6201/6701 DSP host port interface (HPI) performance (2001-05-10) [ Processors/DSPs ]
• Converting data formats between BMP and COFF files for TMS320 DSP simulation (2001-05-10) [ Processors/DSPs ]

• Configuring digital I/Os of the TMS320F240 DSP controller (2001-05-10) [ Processors/DSPs ]
• Bit-reverse and digit-reverse: Linear-time small lookup table implementation for the TMS320C6000 (2001-05-10) [ Processors/DSPs ]
• Switched reluctance motor control—Basic operation and example using the TMS320F240 (2001-05-10) [ Processors/DSPs ]
• TMS320C6x thermal design considerations (2001-05-10) [ Processors/DSPs ]
• Reset circuit for the TMS320C6000 DSP (2001-05-10) [ Processors/DSPs ]

• TMS320C6201 system clock circuit example (2001-05-10) [ Processors/DSPs ]
• Measuring the frequency of an input square wave using the TMS320F240 EVM (2001-05-09) [ Processors/DSPs ]
• Generating a PWM signal modulated by an analog input using the TMS320F240 EVM (2001-05-09) [ Processors/DSPs ]
• Creating a two-channel sine wave generator using the TMS320F240 EVM (2001-05-09) [ Processors/DSPs ]
• Using the capture units for low speed velocity estimation on a TMS320C240 (2001-05-09) [ Processors/DSPs ]

• Implementing a spectrum analyzer using a 128-point FFT and the TMS320F240 EVM (2001-05-09) [ Processors/DSPs ]
• Controlling a sine wave generator with the serial port using the TMS320F240 EVM (2001-05-09) [ Processors/DSPs ]
• Creating a sine modulated PWM signal using the TMS320F240 EVM (2001-05-09) [ Processors/DSPs ]
• Implementing the gamma correction algorithm using the TMS320C2xx DSP (2001-05-09) [ Processors/DSPs ]
• TMS320C24x PWM full compare in symmetric mode (2001-05-09) [ Processors/DSPs ]

• Implementing the color space transformation algorithm using the TMS320C2xx (2001-05-09) [ Processors/DSPs ]
• I/O Using the TMS320C2xx asynchronous serial port in C (2001-05-09) [ Processors/DSPs ]
• Generating efficient code with TMS320 DSPs: Style guidelines (2001-05-09) [ Processors/DSPs ]
• TMS320C24x general purpose timer 1 symmetric mode (2001-05-09) [ Processors/DSPs ]
• TMS320C24x general purpose timer 1 asymmetric mode (2001-05-09) [ Processors/DSPs ]

• Demonstrating TMS320C2xx pipeline operation during an interrupt (2001-05-09) [ Processors/DSPs ]
• Implementing a noise cancellation system with the TMS320C31 (2001-05-08) [ Processors/DSPs ]
• Implementing the high-speed modem with multidimensional modulation using the TMS320C542 DSP (2001-05-08) [ Processors/DSPs ]
• Real-time implementation of a COFDM modem for data transmission over HF channels with the TMS320C31 DSP (2001-05-08) [ Processors/DSPs ]
• Designing artificial neural networks for fault detection in induction motors with the TMS320C30 DSP (2001-05-08) [ Processors/DSPs ]

• Implementing vocoder and HF modem algorithms using the TMS320C31 DSP (2001-05-08) [ Processors/DSPs ]
• Implementing an adaptive noise canceling system to enhance sonar receiver performance using the TMS320C31 DSP (2001-05-08) [ Processors/DSPs ]
• Implementing an in-service, non-intrusive measurement device in telecommunication networks using the TMS320C31 (2001-05-08) [ Processors/DSPs ]
• DSP solutions for motor control using the TMS320F240 DSP-controller (2001-05-08) [ Processors/DSPs ]
• Implementing a fast 3D vision with multiple TMS320C31 DSPs (2001-05-08) [ Sensors/MEMS ]

• Using TMS320 family DSPs in motion control systems (2001-05-08) [ Processors/DSPs ]
• Speech control for virtual instruments using the TMS320C30 DSP (2001-05-08) [ Processors/DSPs ]
• Mu-law and A-law companding using the TMS320C2xx DSP (2001-05-08) [ Processors/DSPs ]
• Developing a low bit rate speech coder based on the half-rate GSM standard with the TMS320C30 DSP (2001-05-08) [ Processors/DSPs ]
• Implementing a real time system for lung sound spectrographs using the TMS320C30 DSP (2001-05-08) [ Processors/DSPs ]

• Determining CPU and memory requirements for real-time speech recognition systems using the TMS320C3x/C4x (2001-05-08) [ Processors/DSPs ]
• No resist can mask those halogens (2001-05-08) [ Manufacturing/Packaging ]
• Moving data across asynchronous clock boundaries (2001-05-08) [ EDA/IP ]
• System integration technologies support SoC design (2001-05-08) [ Manufacturing/Packaging ]
• Laser processing of flex (2001-05-08) [ Manufacturing/Packaging ]

• ADSL technology explained: The Physical Layer (2001-05-08) [ Networks ]
• Designing low-power applications with the TMS320LC54x (2001-05-07) [ Processors/DSPs ]
• Dual power-supply management for the TMS320VC549 DSP (2001-05-07) [ Processors/DSPs ]
• Implementing fast Fourier transform algorithms of real-valued sequences with the TMS320 DSP family (2001-05-07) [ Processors/DSPs ]
• Designing an embedded operating system with the TMS320 family of DSPs (2001-05-07) [ Processors/DSPs ]

• TMS320C/F240 evaluation board initialization software (2001-05-07) [ Processors/DSPs ]
• Using the TMS320C24X DSP controller for optimal digital control (2001-05-07) [ Processors/DSPs ]
• Implementing a DSP kernel for online dynamic handwritten signature verification using the TMS320 DSP family (2001-05-07) [ Processors/DSPs ]
• Extended precision radix-4 fast Fourier transform implemented on the TMS320C62xx (2001-05-07) [ Processors/DSPs ]
• Converting code from the TMS320C5x DSP to the TMS320C2xx DSP (2001-05-07) [ Processors/DSPs ]

• Implementing circular buffers with bit-reversed addressing (2001-05-07) [ Processors/DSPs ]
• Implementing a signal processing subsystem to detect stimulated octo-acoustic emissions using the TMS320C31 DSP (2001-05-07) [ Processors/DSPs ]
• Configuring PWM outputs of TMS320F240 with dead band for different power devices (2001-05-07) [ Processors/DSPs ]
• EDI's x32 MCM-L SRAM family: Integrated memory solution for TMS320C3x DSPs (2001-05-07) [ Memory/Storage ]
• AC induction motor control using constant V/Hz principle and space vector PWM technique with TMS320C240 (2001-05-07) [ Processors/DSPs ]

• Implementation of a current controlled switched reluctance motor drive using TMS320F240 (2001-05-07) [ Processors/DSPs ]
• Interfacing a TMS320C3x to the TLC320AD58C 18bit stereo A/D converter (2001-05-04) [ Processors/DSPs ]
• Interfacing a TMS320C2x, 'C2xx, or 'C5x DSP to a TLC548 8bit A/D converter (2001-05-04) [ Processors/DSPs ]
• Accessing TMS320C54x memory-mapped registers in C-C54XREGS.H (2001-05-04) [ Processors/DSPs ]
• How can comb filters be used to synthesize musical instruments on a TMS320 DSP? (2001-05-04) [ Processors/DSPs ]

• Parity generation on the TMS320C54x (2001-05-04) [ Processors/DSPs ]
• Interfacing a TMS320C2x, 'C2xx, or 'C5x DSP to an 8bit boot EPROM (2001-05-04) [ Memory/Storage ]
• Interfacing 20MSPS TLC5510 Flash A/D converter to TMS320C2xx and TMS320C5x fixed-point DSPs (2001-05-04) [ Processors/DSPs ]
• Obtaining absolute encoder position on a TMS320C240 (2001-05-04) [ Sensors/MEMS ]
• Using a TMS320C30 serial port as an asynchronous RS-232 port (2001-05-04) [ Processors/DSPs ]

• How to convert a HEX30 output file into a linkable assembly file (2001-05-04) [ Embedded ]
• µ-Law compression on the TMS320C54x (2001-05-04) [ Processors/DSPs ]
• Multi-pass linking (2001-05-04) [ Processors/DSPs ]
• Accessing status and control fields and I/O ports in the TMS320Cxx HLL debugger (2001-05-04) [ Processors/DSPs ]
• Developing a full-duplex UART on the TMS320C3x (2001-05-04) [ Processors/DSPs ]

• Emulator processor access timeout (2001-05-04) [ Processors/DSPs ]
• Addressing peripherals as data structures in C (2001-05-03) [ Processors/DSPs ]
• Interrupts in C on the TMS320C3x (2001-05-03) [ Processors/DSPs ]
• Floating point C compiler: Tips and tricks—Part I (2001-05-03) [ Processors/DSPs ]
• Bit-reversed addressing in C on the 'C3x (2001-05-03) [ Processors/DSPs ]

• Improved context save/restore performance and interrupt latency for ISRs written in C (2001-05-03) [ Processors/DSPs ]
• Using VRAMs and DSPs for system performance (2001-05-03) [ Processors/DSPs ]
• Fast logarithms on a floating-point device (2001-05-03) [ Processors/DSPs ]
• Hardware UART for the TMS320C3x (2001-05-03) [ Processors/DSPs ]
• Guidelines for using decoupling capacitors on DSP designs (2001-05-03) [ Processors/DSPs ]

• Bit-reversed addressing without data alignment on the 'C3x (2001-05-03) [ Processors/DSPs ]
• Avoiding false interrupts on the TMS320C3x (2001-05-03) [ Processors/DSPs ]
• C3x block repeat (2001-05-03) [ Processors/DSPs ]
• Reducing system power requirements (2001-05-03) [ Processors/DSPs ]
• Switching from bootloader to MP mode with TMS320C31 (2001-05-03) [ Processors/DSPs ]

• Sharing header files in C and assembly (2001-05-03) [ Embedded ]
• Integrated automotive signal processing and audio system using the TMS320C3x (2001-05-02) [ Processors/DSPs ]
• EDRAM memory controller for the TMS320C31 DSP (2001-05-02) [ Memory/Storage ]
• C54x extended addressing (2001-05-02) [ Memory/Storage ]
• DTMF tone generation and detection: An implementation using the TMS320C54x (2001-05-02) [ Processors/DSPs ]

• Digital cellular phone: A functional analysis (2001-05-02) [ RF/Microwave ]
• Implementing a line-echo canceler using the block update and NLMS algorithms on the TMS320C54x DSP (2001-05-02) [ Processors/DSPs ]
• A-law and Mu-law companding implementations using the TMS320C54x (2001-05-02) [ Processors/DSPs ]
• Calculation of TMS320LC54x power dissipation (2001-05-02) [ Processors/DSPs ]
• Calculation of TMS320C2xx power dissipation (2001-05-02) [ Processors/DSPs ]

• Implementing speech-recognition algorithms on the TMS320C2xx platform (2001-05-02) [ Processors/DSPs ]
• The TMS320C54x DSP HPI and PC parallel port interface (2001-05-02) [ Processors/DSPs ]
• Digital sine-wave generation using the TMS320C2xx (2001-05-02) [ Processors/DSPs ]
• Implementing real-time Cardiac imaging using the TMS320C3x DSP (2001-05-02) [ Processors/DSPs ]
• Implementing continuously programmable digital filters with the TMS320C30/40 DSP (2001-05-02) [ Processors/DSPs ]

• TMS320C54x DSP programming environment (2001-05-02) [ Processors/DSPs ]
• DSP solutions for telephony and data/facsimile modems (2001-05-01) [ Processors/DSPs ]
• Power supply sequencing solutions for dual supply voltage DSPs (2001-05-01) [ Processors/DSPs ]
• Interfacing memory to the TMS320C32 DSP (2001-05-01) [ Memory/Storage ]
• Booting a TMS320C32 target system in a C environment (2001-05-01) [ Processors/DSPs ]

• How TMS320 tools interact with the TMS320C32's enhanced memory interface (2001-05-01) [ Processors/DSPs ]
• Setting up TMS320 DSP interrupts in C (2001-05-01) [ Processors/DSPs ]
• Viterbi decoding techniques in the TMS320C54x family (2001-05-01) [ Processors/DSPs ]
• Ultralow-power supply voltage supervisor family TPS383x (2001-05-01) [ Amplifiers/Converters ]
• Setting up TMS320C6201 interrupts in C (2001-05-01) [ Processors/DSPs ]

• The TMS320C2xx sum-of-products methodology (2001-05-01) [ Processors/DSPs ]
• TPS3801/09—Smallest SVS for monitoring DSPs and processors (2001-05-01) [ Amplifiers/Converters ]
• TPS6010x/TPS6011x charge pump (2001-05-01) [ Amplifiers/Converters ]
• Providing a DSP power solution from 5V or 3.3V only system (2001-05-01) [ Amplifiers/Converters ]
• Enhanced control of an alternating current motor using fuzzy logic and a TMS320 digital signal processor (2001-05-01) [ Processors/DSPs ]

• Acoustic-echo cancellation software for hands-free wireless systems (2001-05-01) [ RF/Microwave ]
• HAL levels the playing field (2001-05-01) [ EDA/IP ]
• Cleaning up the flip-chip production act (2001-05-01) [ Manufacturing/Packaging ]
• Selecting a microvia process (2001-05-01) [ EDA/IP ]
• Modular component design reuse (2001-05-01) [ EDA/IP ]

• Signal integrity moving beyond high-speed design (2001-05-01) [ Amplifiers/Converters ]
• Putting automated libraries into the flow (2001-05-01) [ EDA/IP ]
• Abstracting system hardware for maximum reuse (2001-05-01) [ Memory/Storage ]
• Power distribution for deep-submicron SoC designs (2001-05-01) [ Power/Alternative Energy ]
• Timing analysis tools greatly impacts a successful design (2001-05-01) [ EDA/IP ]

• Choosing an ADC and op-amp for minimum offset (2001-04-30) [ Processors/DSPs ]
• Interfacing with the TLV1571/78 analog-to-digital converter to the TMS320C542 DSP (2001-04-30) [ Processors/DSPs ]
• Implementation of a speed field orientated control of three phase ac induction motor using TMS320F240 (2001-04-30) [ Processors/DSPs ]
• Field orientated control of 3-phase ac-motors (2001-04-30) [ Processors/DSPs ]
• Interfacing the TLV2544/TLV2548 ADC to the TMS320C31 DSP (2001-04-30) [ Processors/DSPs ]

• TPS5625 working with TMS320C6201 applications (2001-04-30) [ Processors/DSPs ]
• FIFO patented synchronous retransmit: Programmable DSP-interface application for FIR filtering (2001-04-30) [ Memory/Storage ]
• DC 12-24V 30A three phase power hardware for either PMSM or ac induction machines (2001-04-30) [ Processors/DSPs ]
• TMS320C62x/67x power supply solutions for 1-2 DSPs: Using the TL5001A and TPS7133 (2001-04-30) [ Processors/DSPs ]
• Interfacing the TLV1544 and TLV1548 A/D converters to digital processors (2001-04-30) [ Processors/DSPs ]

• Implementation of a sensorless speed controlled brushless dc drive using TMS320F240 (2001-04-30) [ Processors/DSPs ]
• FIFO mailbox-bypass registers: Using bypass registers to initialize DMA control (2001-04-30) [ Processors/DSPs ]
• Designing with the THS1206 high-speed data converter (2001-04-30) [ Amplifiers/Converters ]
• TMS320C5x to TMS320C54x translation utility (2001-04-30) [ Processors/DSPs ]
• IOM-2 interfacing on TMS320C54x (2001-04-30) [ Processors/DSPs ]

• Digital signal processing solutions for the switched reluctance motor (2001-04-27) [ Processors/DSPs ]
• Implementation of a speed controlled brushless dc drive using TMS320F240 (2001-04-27) [ Processors/DSPs ]
• Echo cancellation software for the TMS320C54x (2001-04-27) [ Processors/DSPs ]
• Sensorless control with Kalman filter on TMS320 fixed-point DSP (2001-04-27) [ Processors/DSPs ]
• DSP solutions for BLDC motors (2001-04-27) [ Processors/DSPs ]

• Clarke & Park transforms on the TMS320C2xx (2001-04-27) [ Processors/DSPs ]
• Caller ID on TMS320C2xx (2001-04-27) [ Processors/DSPs ]
• Table look-up and interpolation on the TMS320C2xx (2001-04-27) [ Processors/DSPs ]
• Sine, cosine on the TMS320C2xx (2001-04-27) [ Processors/DSPs ]
• Digital signal processing solution for permanent magnet synchronous motor (2001-04-27) [ Processors/DSPs ]

• Accessing and writing to the TMS320C2xx I/O memory mapped registers (2001-04-27) [ Memory/Storage ]
• Digital signal processing solution for ac induction motor (2001-04-27) [ Processors/DSPs ]
• Implementation of G.726 ADPCM on Texas Instruments TMS320C62xx processors (2001-04-27) [ Processors/DSPs ]
• DTMF tone generation: An implementation using the TMS320C2xx (2001-04-27) [ Processors/DSPs ]
• An introduction to fractal image compression (2001-04-27) [ Amplifiers/Converters ]

• Receiver characterization using periodic small-signal analysis (2001-04-26) [ RF/Microwave ]
• Extracting linear and non-linear k-models of RF receivers (2001-04-26) [ Processors/DSPs ]
• Using tabulated s-parameters with SpectreRF (2001-04-26) [ RF/Microwave ]
• Modeling and simulation of on-chip Spiral inductors and transformers (2001-04-26) [ RF/Microwave ]
• Substrate coupling analysis in RF circuits (2001-04-26) [ RF/Microwave ]

• Using the resolve optimizer with RF simulations in the Affirma analog design environment (2001-04-26) [ RF/Microwave ]
• Using IPN for RF simulations in the Affirma analog design environment (2001-04-26) [ RF/Microwave ]
• Behavioral modeling of RF circuits in Spectre (2001-04-26) [ RF/Microwave ]
• Modeling and simulation of jitter in PLL frequency synthesizers (2001-04-26) [ RF/Microwave ]
• An introduction to the PLL library (2001-04-26) [ EDA/IP ]

• Oscillator noise analysis in SpectreRF (2001-04-26) [ EDA/IP ]
• Accurate Fourier analysis for circuit simulators (2001-04-26) [ EDA/IP ]
• Extracting and using J-models to estimate ACPR in direct conversion transmitters (2001-04-26) [ Power/Alternative Energy ]
• Modeling and application of bonding pads (2001-04-26) [ EDA/IP ]
• Periodic s-parameter and noise analysis using SpectreRF PSP/PNOISE analyses (2001-04-26) [ EDA/IP ]

• TSB12LV32 (GP2Lynx)/TSB41LV03 reference schematic (2001-04-25) [ Networks ]
• Endianness and the TSB12LV41 (MPEG2Lynx) microprocessor interface (2001-04-25) [ Networks ]
• TSB12LV42/TSB41LV03 reference schematic (2001-04-25) [ Networks ]
• Recommendations for PHY layout (2001-04-25) [ Networks ]
• Design of the GPLynx HAL (2001-04-25) [ Networks ]

• TSB12LV22 (OHCI-Lynx) implementation guide (2001-04-25) [ Networks ]
• Embedded 1394 LynxSoft hardware abstraction layer (HAL) for MPEG2Lynx and GPLynx: Programmers interface user's guide (2001-04-25) [ Networks ]
• Initialization and asynchronous programming of the PCILynx TSB12LV21A 1394 device (2001-04-25) [ Networks ]
• Interfacing the TSB12LV41 1394 link layer controller to the TMS320AV7100 DSP embedded ARM processor (2001-04-25) [ Networks ]
• Galvanic isolation of the IEEE 1394-1995 serial bus (2001-04-25) [ Power/Alternative Energy ]

• PCILynx 1394 to PCI bus interface TSB12LV21BPGF (2001-04-25) [ Networks ]
• Implementing JTAG testing with MPEG2Lynx (2001-04-25) [ Networks ]
• How to simulate RTL designs with LSS memory (2001-04-25) [ EDA/IP ]
• Understanding the TSB12LV4x bulky data interface (2001-04-25) [ Networks ]
• Synthesizing LSS designs with Synopsys design compiler (2001-04-25) [ EDA/IP ]

• Setting a LOP (Loss Of Power) threshold level equivalent (2001-04-24) [ Power/Alternative Energy ]
• Disabling the channel-assignment feature of the MAX3831 (2001-04-24) [ Networks ]
• Measuring deterministic jitter with a K28.5 pattern and an oscilloscope (2001-04-24) [ T&M ]
• Jitter specifications made easy: A heuristic discussion of Fibre Channel and Gigabit Ethernet methods (2001-04-24) [ T&M ]
• MAX3752 impedance-matching experiments (2001-04-24) [ Networks ]

• Introduction to LVDS, PECL and CML (2001-04-24) [ Networks ]
• Equalizing gigabit copper cable links with the MAX3800 (2001-04-24) [ Networks ]
• Single-ended and differential s-parameters (2001-04-24) [ Amplifiers/Converters ]
• Choosing ac-coupling capacitors (2001-04-24) [ Amplifiers/Converters ]
• Interfacing Maxim laser drivers with laser diodes (2001-04-24) [ Amplifiers/Converters ]

• Generating jitter for Fibre Channel compliance testing (2001-04-24) [ Amplifiers/Converters ]
• Interfacing single-ended PECL to differential PECL and differential PECL to single-ended PECL (2001-04-24) [ Networks ]
• Using MAX3265 LOS in GBICs (2001-04-24) [ Amplifiers/Converters ]
• Laser-driver parametric calculator (2001-04-24) [ Amplifiers/Converters ]
• Simulating direct laser modulation with the MAX3930 (2001-04-24) [ Amplifiers/Converters ]

• Pad pieces (2001-04-23) [ FPGAs/PLDs ]
• Memories (2001-04-23) [ Memory/Storage ]
• Guidelines for supplying test vector simulations (2001-04-23) [ EDA/IP ]
• Power estimation (2001-04-23) [ Power/Alternative Energy ]
• Using NAND tree test circuits for input parametric testing (2001-04-23) [ EDA/IP ]

• On-chip pull-up/Pull-down resistors (2001-04-23) [ FPGAs/PLDs ]
• Metastability (2001-04-23) [ FPGAs/PLDs ]
• Clocking at AMI (2001-04-23) [ EDA/IP ]
• Thermal resistance of packages (2001-04-23) [ Manufacturing/Packaging ]
• Using the PAC AC97 in PC-based audio systems (2001-04-23) [ Amplifiers/Converters ]

• Design considerations for ESD protection using ESD protection diode arrays (2001-04-23) [ Amplifiers/Converters ]
• 500W, Class E 27.12 MHz Amplifier Using A Single Plastic MOSFET (2001-04-23) [ Amplifiers/Converters ]
• Crystal oscillators (2001-04-23) [ Amplifiers/Converters ]
• 8kW resonant converter for x-ray machines uses high speed power modules with integral liquid cooling (2001-04-23) [ Amplifiers/Converters ]
• Boundary scan and internal scan (2001-04-23) [ EDA/IP ]

• Performance comparison of the new generation of IGBTs with MOSFETs at 150kHz (2001-04-20) [ Amplifiers/Converters ]
• Cutting-edge mount down methods boost power semiconductor performance and cut system costs (2001-04-20) [ Amplifiers/Converters ]
• A 300W MOSFET linear amplifier for 50MHz (2001-04-20) [ Amplifiers/Converters ]
• A push-pull 300W amplifier for 81.36MHz (2001-04-20) [ Amplifiers/Converters ]
• High-voltage MOSFET behavior in soft-switching converters: Analysis and reliability improvements (2001-04-20) [ Amplifiers/Converters ]

• A new generation of power MOSFETs offers improved performance at reduced cost (2001-04-20) [ Amplifiers/Converters ]
• Innovative mounting techniques enhance thermal performance of the surface-mount D3Pak Package (2001-04-20) [ Manufacturing/Packaging ]
• A 50MHz, 250W amplifier using push-pull ARF448A/B (2001-04-20) [ Amplifiers/Converters ]
• Low-cost 1,000W 300V RF power amplifier For 27.12MHz (2001-04-20) [ Amplifiers/Converters ]
• Low-cost 1000W, 300V RF power amplifier for 13.56MHz (2001-04-20) [ Amplifiers/Converters ]

• Understanding the differences between standard MOSFETs and avalanche energy rated MOSFETs (2001-04-20) [ Amplifiers/Converters ]
• Gate drive design for large die MOSFETs (2001-04-20) [ Amplifiers/Converters ]
• New ultra-fast recovery diode technology improves performance of high frequency power circuits (2001-04-20) [ Amplifiers/Converters ]
• A high-efficiency 400W 13.56MHz RF power amplifier (2001-04-20) [ Amplifiers/Converters ]
• Simple and inexpensive high-efficiency power amplifier using new APT MOSFETs (2001-04-20) [ Amplifiers/Converters ]

• A low phase noise VCO design for PCS handset applications (2001-04-19) [ RF/Microwave ]
• A dual-band switchable IF VCO for GSM/PCS handsets (2001-04-19) [ RF/Microwave ]
• Epoxy die attachment for GaAs flip-chip devices (2001-04-19) [ Manufacturing/Packaging ]
• Circuit models for plastic packaged microwave diodes (2001-04-19) [ T&M ]
• A level detector design for dual-band GSM-PCS handsets (2001-04-19) [ RF/Microwave ]

• A differential VCO design for GSM handset applications (2001-04-19) [ Amplifiers/Converters ]
• A 5-6GHz switch using low-cost plastic packaged PIN diodes (2001-04-19) [ Amplifiers/Converters ]
• Varactor SPICE models for RF VCO applications (2001-04-19) [ EDA/IP ]
• 6-bit 63dB IF digital attenuator solution 1-500MHz (2001-04-19) [ Amplifiers/Converters ]
• T/R switch for IMT-2000 handset applications (2001-04-19) [ Amplifiers/Converters ]

• A Colpitts VCO for wideband (0.95- to 2.15GHz) set-top TV tuner applications (2001-04-19) [ Amplifiers/Converters ]
• A balanced wideband VCO for set-top TV tuner applications (2001-04-19) [ Amplifiers/Converters ]
• A wideband general purpose PIN diode attenuator (2001-04-19) [ Amplifiers/Converters ]
• Single-phase brushless dc motor controller using the LS7261/7262 (2001-04-19) [ Sensors/MEMS ]
• Three and four phase brushless dc motor controllers using pulse-width modulation (2001-04-19) [ Amplifiers/Converters ]

• Interfacing the CS5525/6/9 to the 80C51 (2001-04-18) [ Amplifiers/Converters ]
• Precision very long time pulse (2001-04-18) [ Amplifiers/Converters ]
• Self-scanned cascade readout of the LS7060 and LS7061 (2001-04-18) [ Embedded ]
• Using the LS7210 as a state-generator for a blower-motor controller (2001-04-18) [ Amplifiers/Converters ]
• Brush dc motor drive using the LS7260/7261/7262 brushless dc motor commutator IC (2001-04-18) [ Amplifiers/Converters ]

• A dual dimming control light switch with unique delayed-off feature (2001-04-18) [ Amplifiers/Converters ]
• A transformer secondary electronic dimmer for low-voltage halogen lamps (2001-04-18) [ Amplifiers/Converters ]
• Heavy-duty ac power control with automatic variable timed operation and overload shutdown (2001-04-18) [ Amplifiers/Converters ]
• A universal power control circuit for appliances (2001-04-18) [ Amplifiers/Converters ]
• Using the CS5525/CS5526 in multiplexed applications (2001-04-18) [ Amplifiers/Converters ]

• The CS5101A/CS5102A: Minimizing start-up time after coming out of sleep (2001-04-18) [ Amplifiers/Converters ]
• Guidelines for implementing low-cost Ethernet on the Motherboard (2001-04-18) [ Networks ]
• Crystal LAN CS8900A Ethernet controller technical reference manual (2001-04-18) [ Networks ]
• Interfacing the CS5525/6/9 to the 68HC05 (2001-04-18) [ Embedded ]
• Interfacing the CS5525/6/9 to the PIC16F84 (2001-04-18) [ Embedded ]

• CDB5509 capture interface (2001-04-17) [ Embedded ]
• A tutorial on MIDI and Wavetable music synthesis (2001-04-17) [ Amplifiers/Converters ]
• CDB5504 capture interface (2001-04-17) [ Embedded ]
• Secondary line protection for T1 and E1 line cards (2001-04-17) [ Amplifiers/Converters ]
• The CS5322 digital filter (2001-04-17) [ Processors/DSPs ]

• Overview of digital audio interface data structures (2001-04-17) [ Amplifiers/Converters ]
• Design notes for a 2-pole filter with differential input (2001-04-17) [ Amplifiers/Converters ]
• Noise histogram analysis (2001-04-17) [ Amplifiers/Converters ]
• CS5516 and CS5520: Overcoming errors in bridge transducer measurement (2001-04-17) [ Amplifiers/Converters ]
• The CS5504 family characteristics (2001-04-17) [ Amplifiers/Converters ]

• CS5516 and CS5520: Answers to application questions (2001-04-17) [ Amplifiers/Converters ]
• A collection of bridge transducer digitizer circuits (2001-04-17) [ Amplifiers/Converters ]
• Switched-capacitor A/D converter input structures (2001-04-17) [ Amplifiers/Converters ]
• Precision temperature measurement using RTDs (resistance temperature detectors) with the CS5516 and CS5520 bridge transducer A/D converters (2001-04-17) [ Amplifiers/Converters ]
• ADC input buffer and protection techniques (2001-04-17) [ Amplifiers/Converters ]

• CS4297A/CS4299 EMI reduction techniques (2001-04-16) [ Amplifiers/Converters ]
• How to program the hash table filter in the CS8900A and CS8920A (2001-04-16) [ Networks ]
• PLL filter optimization for the CS8415A, CS8420 and CS8427 (2001-04-16) [ Amplifiers/Converters ]
• Using the CS7620/22 with CCDs (2001-04-16) [ Amplifiers/Converters ]
• DRX technology: A Cirrus Logic development to enhance digital images (2001-04-16) [ Amplifiers/Converters ]

• Stereo PCM application user's guide for the CS492X family (2001-04-16) [ Amplifiers/Converters ]
• DTS user's guide for the CS4926 and CS4928 (2001-04-16) [ Amplifiers/Converters ]
• Interfacing the CS4954/5 to the SX28AC microcontroller (2001-04-16) [ Amplifiers/Converters ]
• CL-PS7111 evaluation kit?ser manual (2001-04-16) [ Controls/MCUs ]
• Compatibility between CS4299 and AD1881 (2001-04-16) [ Amplifiers/Converters ]

• Measuring high voltages (5V to 1,000V) with the CS5521/23, CS5522/24/28 and CS5525/26 A/D converters (2001-04-16) [ Amplifiers/Converters ]
• Using the crystal CS8900A in 8-bit mode (2001-04-16) [ Networks ]
• LXT310/318 to CS61310/18 replacement guide (2001-04-16) [ Networks ]
• Using the CS5521/23, CS5522/24/28 and CS5525/26 charge pump drive for external loads (2001-04-16) [ Amplifiers/Converters ]
• Using the CS5180 with multiplexed inputs (2001-04-16) [ Amplifiers/Converters ]

• Solder flux jetting technology (2001-04-15) [ Manufacturing/Packaging ]
• RF design of a TDMA handset (2001-04-15) [ RF/Microwave ]
• Power management in CDMA systems (2001-04-15) [ Power/Alternative Energy ]
• DSPs in motor control (2001-04-15) [ Processors/DSPs ]
• Hierarchical physical design for million-gate ASICs (2001-04-15) [ EDA/IP ]

• Timing closure in DSM design (2001-04-15) [ T&M ]
• SERA tin evaluation for surface finish (2001-04-15) [ EDA/IP ]
• PID control without a PhD (2001-04-15) [ Amplifiers/Converters ]
• An overview of multiple CAM designs in Virtex family devices (2001-04-12) [ Memory/Storage ]
• Synthesizable 1.6GBps DDR SDRAM controller (2001-04-12) [ Memory/Storage ]

• Configuring Spartan-II FPGAs from parallel EPROMs (2001-04-12) [ Memory/Storage ]
• Configuring Xilinx FPGAs using an XC9500 CPLD and parallel PROM (2001-04-12) [ Memory/Storage ]
• Using SelectI/O interfaces in Spartan-II FPGAs (2001-04-12) [ FPGAs/PLDs ]
• High-speed FIFOs in Spartan-II FPGAs (2001-04-12) [ FPGAs/PLDs ]
• BSI device software design guide (2001-04-12) [ Networks ]

• Virtex series configuration architecture user guide (2001-04-12) [ FPGAs/PLDs ]
• XC1700 and XC18V00 design migration considerations (2001-04-12) [ Memory/Storage ]
• Data generation and configuration for Spartan series FPGAs (2001-04-12) [ EDA/IP ]
• The role of distributed arithmetic in FPGA-based signal processing (2001-04-12) [ Processors/DSPs ]
• Using FPGAs as a flexible PCI interface solution (2001-04-12) [ FPGAs/PLDs ]

• The challenges of doing a PCI design in FPGAs (2001-04-12) [ Embedded ]
• Using COP800 devices to control dc stepper motors (2001-04-12) [ Amplifiers/Converters ]
• LM78S40 switching voltage regulator applications (2001-04-12) [ Amplifiers/Converters ]
• Interfacing SPI real-time clocks with a microcontroller (2001-04-11) [ Networks ]
• 50Mbps fiber-optic receivers (2001-04-11) [ Networks ]

• LM628/629 user guide (2001-04-11) [ Controls/MCUs ]
• Using the high-speed Micro's serial ports (2001-04-11) [ Controls/MCUs ]
• DS80C320 memory interface timing (2001-04-11) [ Controls/MCUs ]
• The DS80C320 as a drop-in replacement for the 8032 (2001-04-11) [ Controls/MCUs ]
• LM385 feedback provides regulator isolation (2001-04-11) [ Amplifiers/Converters ]

• Design guidelines for microcontrollers incorporating NV RAM (2001-04-11) [ Memory/Storage ]
• Using power management with the DS87C5x0 (2001-04-11) [ Amplifiers/Converters ]
• Monolithic op amp—The Universal Linear Component (2001-04-11) [ Amplifiers/Converters ]
• Designing a nonvolatile 2M x 16-memory subsystem (2001-04-11) [ Memory/Storage ]
• Effects of aperture time and jitter in a sampled data system (2001-04-11) [ Amplifiers/Converters ]

• LCD contrast control using Dallas Semiconductor digital potentiometers (2001-04-11) [ Amplifiers/Converters ]
• Designing with high-speed analog-to-digital converters (2001-04-11) [ Amplifiers/Converters ]
• Low voltage front-end circuits: SA601, SA620 (2001-04-11) [ RF/Microwave ]
• Interfacing the TMS320C54x buffered serial ports to the DS21x5y single chip transceivers (SCT) (2001-04-10) [ Processors/DSPs ]
• DS3134 application note: PCI bus utilization (2001-04-10) [ Networks ]

• Examples of DS3134 CHATEAU applications (2001-04-10) [ Networks ]
• DS3134 step-by-step configuration: Bridge mode (2001-04-10) [ Networks ]
• DS3134 step-by-step configuration: Configuration mode (2001-04-10) [ Networks ]
• DS21x54 versus DS2154 (2001-04-10) [ Networks ]
• DS3134 step-by-step configuration unchannelized port: Configuration mode (2001-04-10) [ Networks ]

• Replacing the TDK 78P7200/2241 with the DS3150 (2001-04-10) [ Networks ]
• DS21x52 versus DS2152 (2001-04-10) [ Networks ]
• DS21Q42 versus DS21Q41B (2001-04-10) [ Networks ]
• DS21Q44 versus DS21Q43A (2001-04-10) [ Networks ]
• DS2152L versus DS2151Q (2001-04-10) [ Networks ]

• Interfacing 3-wire real time clocks with a microcontroller (2001-04-10) [ Embedded ]
• Lithium-ion cell fuel gauging with Dallas Semiconductor devices (2001-04-10) [ Amplifiers/Converters ]
• Interfacing the DS1620 with a DS5000/8051 microcontroller (2001-04-10) [ Amplifiers/Converters ]
• Using the DS2760 in multiple-cell applications (2001-04-09) [ Amplifiers/Converters ]
• NiCd/NiMH intelligent battery system reference design using the DS2437 (2001-04-09) [ Amplifiers/Converters ]

• High-resolution temperature measurement with Dallas direct-to-digital temperature sensors (2001-04-09) [ Sensors/MEMS ]
• DS2141A, DS2151 programming, controlling the FDL (2001-04-09) [ Networks ]
• Controlling a DS1803 digital potentiometer using an 8051 microprocessor to generate 2-wire signals (2001-04-09) [ Embedded ]
• Using multiple DS1267 digital potentiometers with an 8051 microprocessor generating 3-wire signals (2001-04-09) [ Controls/MCUs ]
• Using the high-speed microcontroller as a bootstrap loader (2001-04-09) [ Controls/MCUs ]

• Using the secure microcontroller watchdog timer (2001-04-09) [ Controls/MCUs ]
• Communicating through the 1-wire master (2001-04-09) [ Networks ]
• DS2154L versus DS2153Q (2001-04-09) [ Networks ]
• DS1670 portable system controller (2001-04-09) [ Controls/MCUs ]
• The DS87C550 as an upgrade for 8051 derivatives (2001-04-09) [ Controls/MCUs ]

• Embedding the 1-wire master (2001-04-09) [ Embedded ]
• DS1020/DS1021 8-bit programmable delay lines (2001-04-09) [ Embedded ]
• Using the DS1615 and DS1616 temperature and data recorders (2001-04-09) [ Memory/Storage ]
• Application of the SA9500/SA9502 dual-band CDMA/AMPS downconverter (2001-04-06) [ Amplifiers/Converters ]
• Test fixtures for high-speed logic (2001-04-06) [ T&M ]

• Techniques for optimizing UHF front-end Integrated Circuits (2001-04-06) [ Amplifiers/Converters ]
• Testing and specifying FAST logic (2001-04-06) [ T&M ]
• The behavior of integrated bus hold circuits (2001-04-06) [ FPGAs/PLDs ]
• Thermal considerations for FAST logic products (2001-04-06) [ FPGAs/PLDs ]
• Using a Dallas Semiconductor DS1075 EconOscillator to clock an 8051 microprocessor (2001-04-06) [ Embedded ]

• Using HOTLink with long copper cables (2001-04-06) [ Networks ]
• Serializing high-speed parallel buses to extend their operational length (2001-04-06) [ Networks ]
• An FM/IF system for DECT and other high-speed GFSK applications: SA639 (2001-04-06) [ Amplifiers/Converters ]
• Testing and calibrating a DS2760-based circuit (2001-04-06) [ Amplifiers/Converters ]
• DS1721/DS1621 compatibility (2001-04-06) [ Amplifiers/Converters ]

• Using Dallas battery management ICs with high voltage cell packs (2001-04-06) [ Amplifiers/Converters ]
• Recommended ESD protection and circuit placement for the DS2438 in a Li+ cell pack (2001-04-06) [ Amplifiers/Converters ]
• Using Dallas' 1-wire chips in 1-cell Li+ battery packs with low-side n-channel safety FETs (2001-04-06) [ Amplifiers/Converters ]
• Clock regenerator with crystal-controlled phase-locked loop VCO (NE564) (2001-04-05) [ Embedded ]
• Evaluating the SA605 SO and SSOP demoboard (2001-04-05) [ T&M ]

• Philips FM/IF systems for GMSK/GFSK receivers (2001-04-05) [ Amplifiers/Converters ]
• Demodulating at 10.7MHz IF with the SA605/625 (2001-04-05) [ Amplifiers/Converters ]
• Reviewing key areas when designing with the SA605 (2001-04-05) [ Amplifiers/Converters ]
• High sensitivity applications of low-power RF/IF Integrated Circuits (2001-04-05) [ Amplifiers/Converters ]
• Crystal oscillators and frequency multipliers using the NE602 and NE5212 (2001-04-05) [ Amplifiers/Converters ]

• Applying the oscillator of the SA602 in low-power mixer applications (2001-04-05) [ Amplifiers/Converters ]
• SA900 I/Q transmit modulator for 1GHz applications (2001-04-05) [ Amplifiers/Converters ]
• SA8025 fractional-n synthesizer for 2GHz band applications (2001-04-05) [ Amplifiers/Converters ]
• Using the SA7025 (RevA) and SA8025A for narrow band systems (2001-04-05) [ Amplifiers/Converters ]
• Using The Philips Semiconductors NE5900 Call-Progress Decoder (2001-04-05) [ Amplifiers/Converters ]

• Balanced modulator/demodulator applications using the MC1496/1596 (2001-04-05) [ Amplifiers/Converters ]
• The NE568A as a wideband FM modulator (2001-04-05) [ Amplifiers/Converters ]
• FM And FSK and BPSK demodulation using the Philips NE/SE564 phase-locked loop demoboards (2001-04-05) [ Amplifiers/Converters ]
• PLS173 as a 10-bit comparator, 74LS460 (2001-04-04) [ FPGAs/PLDs ]
• Latches and flip-flops with PLS153 (2001-04-04) [ FPGAs/PLDs ]

• High-speed 8-bit parallel-to-serial converter (2001-04-04) [ Networks ]
• Microprocessor-compatible DACs (2001-04-04) [ Embedded ]
• Using the SA5752 and SA5753 for low voltage designs (2001-04-04) [ Amplifiers/Converters ]
• Audio circuits using the NE5532/3/4 (2001-04-04) [ Amplifiers/Converters ]
• 10.8MHz FSK decoder with NE564 (2001-04-04) [ Amplifiers/Converters ]

• Frequency synthesis with the NE564 (2001-04-04) [ Amplifiers/Converters ]
• Integrated operational amplifier theory (2001-04-04) [ Amplifiers/Converters ]
• NE5205: A cascadable amplifier (2001-04-04) [ Amplifiers/Converters ]
• Compensation techniques for use with the NE/SE5539 (2001-04-04) [ Amplifiers/Converters ]
• Switched-mode drives for dc motors (2001-04-04) [ Amplifiers/Converters ]

• NE5560 push-pull regulator application (2001-04-04) [ Amplifiers/Converters ]
• An overview of switched-mode power supplies (2001-04-04) [ Amplifiers/Converters ]
• Electronic compass design using KMZ51 and KMZ52 (2001-04-04) [ Amplifiers/Converters ]
• Flexible System Architectures Required For Integrating Bluetooth Into Consumer Devices (2001-04-03) [ RF/Microwave ]
• Simplifying LVDS Backplane Design In 3G Wireless Basestations (2001-04-03) [ RF/Microwave ]

• Secure And Intelligent Internet Data Communications (2001-04-03) [ Networks ]
• ADSL CO Driver Design And Thermal Resistance (2001-04-03) [ Networks ]
• 1394: Success In The PC Market (2001-04-03) [ Interface ]
• High Availability Design For Embedded Systems (2001-04-03) [ Embedded ]
• Performance Of An IF Sampling ADC In Receiver Applications (2001-04-03) [ Amplifiers/Converters ]

• 2.4GHz low-noise amplifier with the BFG480W (2001-04-03) [ Networks ]
• Wideband 300W push-pull FM amplifier using BLV25 transistors (2001-04-03) [ Amplifiers/Converters ]
• Broadband impedance matching for s-band transistors (2001-04-03) [ Amplifiers/Converters ]
• Two-tone linearity in a 900MHz silicon bipolar class AB amplifier (2001-04-03) [ RF/Microwave ]
• 400MHz low-noise amplifier with the BFG540W/X (2001-04-03) [ RF/Microwave ]

• 900MHz low-noise amplifier with the BFG480W (2001-04-03) [ RF/Microwave ]
• 900MHz-driver amplifier with the BFG425W (2001-04-03) [ RF/Microwave ]
• 2GHz buffer amplifier with the BFG410W (2001-04-03) [ RF/Microwave ]
• Two-stage wideband HF linear amplifier for 400W PEP using BLW96 and BLW50F (2001-04-03) [ RF/Microwave ]
• 50W basestation power amplifier for DCS1800 and PCS1900 (2001-04-03) [ RF/Microwave ]

• 30W class-AB amplifier with the BLV2045 for 1930MHz to 1990 MHz (PCS) (2001-04-03) [ RF/Microwave ]
• 2.45GHz power amplifier with the BFG480W (2001-04-03) [ Networks ]
• 2.4GHz power amplifier with the BFG425W and the BFG21W (2001-04-03) [ Networks ]
• A broadband 100W push-pull amplifier for band IV & V TV transmitters based on the BLV861 (2001-04-03) [ Amplifiers/Converters ]
• A linear broadband 12W amplifier for band IV/V TV transposers based on the BLV58 (2001-04-03) [ Amplifiers/Converters ]

• Bluetooth Architecture, Protocol And Applications (2001-04-02) [ RF/Microwave ]
• Designing Local Oscillators For CDMA Mobile Handsets (2001-04-02) [ RF/Microwave ]
• Using ARCNET For Industrial And Embedded Networking Applications (2001-04-02) [ Networks ]
• Digital Imaging Using CMOS Sensors (2001-04-02) [ Amplifiers/Converters ]
• Centralized And Decentralized PCI Based Systems (2001-04-02) [ Memory/Storage ]

• What's New In 1394b (2001-04-02) [ Interface ]
• Embedded DSPs bring cost-effective high-performance solutions to appliance control (2001-04-02) [ Processors/DSPs ]
• 4W linear class-AB amplifier with the BLV2042 for 1930MHz to 1990MHz (2001-04-02) [ RF/Microwave ]
• 15W class-AB amplifier with the BLV2044 For 1930MHz to 1990MHz (PCS) (2001-04-02) [ RF/Microwave ]
• 9W linear class-AB amplifier with the BLV909 for 935MHz to 960MHz (2001-04-02) [ RF/Microwave ]

• 5W class-AB amplifier with the BLV904 for 935MHz to 960MHz (2001-04-02) [ RF/Microwave ]
• 933MHz low-power downconverter with 60MHz IF (2001-04-02) [ RF/Microwave ]
• 900MHz driver-amplifier with enable-switch using the BFG425W (2001-04-02) [ RF/Microwave ]
• 400MHz low-noise amplifier with the BFG540W/X (2001-04-02) [ RF/Microwave ]
• 1.5GHz low-noise amplifier with the BFG425W (2001-04-02) [ RF/Microwave ]

• A broadband 3W amplifier for band IV/V TV transposers based on the BLW898 (2001-04-02) [ Amplifiers/Converters ]
• A broadband 150W amplifier for band IV & V TV transmitters based on the BLV862 (2001-04-02) [ Amplifiers/Converters ]
• Mounting consideration for SOT409 (Ceramic SO-8) devices (2001-04-02) [ Amplifiers/Converters ]
• Using the analog-to-digital converter of the 8XC552 microcontroller (2001-04-02) [ Embedded ]
• A linear 20W broadband amplifier for band IV/V TV transposers based on the BLV857 (2001-04-02) [ Amplifiers/Converters ]

• BLV859 UHF linear push-pull power transistor (2001-04-02) [ Amplifiers/Converters ]
• 2GHz driver-amplifier with the BFG425W (2001-04-02) [ Amplifiers/Converters ]
• EDGE handsets: Redesigning baseband for voice and data (2001-04-01) [ RF/Microwave ]
• Solder joint reliability of BGA/CSP for mobile phones (2001-04-01) [ EDA/IP ]
• Fast testing techniques for OC-192 (2001-04-01) [ Networks ]

• Adopting Docsis for broadband wireless (2001-04-01) [ Networks ]
• Hardware implementations of multi-rate digital filters (2001-04-01) [ Processors/DSPs ]
• Which data transfer format is best for the industry? (2001-04-01) [ EDA/IP ]
• Power distribution for high-performance processors (2001-04-01) [ Amplifiers/Converters ]
• Back-end copper metallization for flip chip (2001-04-01) [ Manufacturing/Packaging ]

• EDGE handsets: Redesigning baseband for voice and data (2001-04-01) [ RF/Microwave ]
• Solder joint reliability of BGA/CSP for mobile phones (2001-04-01) [ EDA/IP ]
• Fast testing techniques for OC-192 (2001-04-01) [ Networks ]
• Portable Applications Drive Packaging Evolution (2001-03-30) [ Manufacturing/Packaging ]
• GPS Receiver Modules Ease Overall System Design (2001-03-30) [ RF/Microwave ]

• Flash-Based Ultra Low Power Mixed-Signal Compact System Designs (2001-03-30) [ Power/Alternative Energy ]
• A New Way To Design ASICs (2001-03-30) [ FPGAs/PLDs ]
• Solutions For Speeding Up Communication Equipment's Time-To-Market (2001-03-30) [ Networks ]
• Using Integrated Active Video Filters In Consumer Multimedia Systems (2001-03-30) [ Amplifiers/Converters ]
• CSP MOSFETs Offer Both Size And Performance Advantages (2001-03-30) [ RF/Microwave ]

• Detailed calibration procedures for multifunction DAQ boards (2001-03-30) [ Amplifiers/Converters ]
• Using DAQ event messaging under Windows NT/95/3.1 (2001-03-30) [ Amplifiers/Converters ]
• IEEE 1284: Updating the PC parallel port (2001-03-30) [ Interface ]
• Connector options for the NI 6810 serial data analyzer (2001-03-30) [ Amplifiers/Converters ]
• VIC64 to Motorola 68040 interface (2001-03-30) [ Embedded ]

• How to use 5B series modules with the DAQ channel Wizard (2001-03-30) [ Amplifiers/Converters ]
• Importing a Warp post-fit netlist into Mentor Graphics' ModelSim (2001-03-30) [ EDA/IP ]
• Field wiring and noise considerations for analog signals (2001-03-30) [ Amplifiers/Converters ]
• Programming interrupts for DOS-based data acquisition on 80x86-based computers (2001-03-30) [ Embedded ]
• Initialization and use of VIC068A/VIC64 registers (2001-03-30) [ Controls/MCUs ]

• Demystifying instrument specifications: How to make sense out of the Jargon (2001-03-30) [ Amplifiers/Converters ]
• Features of the VIC068A VMEbus interface controller (2001-03-30) [ Embedded ]
• Connecting the Cypress VIC068/VAC068 to the TI TMS320C40: A prototype design (2001-03-30) [ Embedded ]
• Understanding the Warp report file for Ultra37000-devices (2001-03-30) [ FPGAs/PLDs ]
• Design optimization using Warp synthesis directives (2001-03-30) [ FPGAs/PLDs ]

• Synchronizing Network Elements On SONET/SDH Rings (2001-03-29) [ Networks ]
• Power Management For MP3 Players (2001-03-29) [ Amplifiers/Converters ]
• An Appreciation Of SOC On Bluetooth Headset (2001-03-29) [ RF/Microwave ]
• Compact, Low Cost, On-Board Power Supplies Uses No Heat Sink (2001-03-29) [ Power/Alternative Energy ]
• Decrease Power Consumption Using A PLD (2001-03-29) [ Power/Alternative Energy ]

• Technical overview of IEEE 1394 (2001-03-29) [ Interface ]
• Designing a USB keyboard with the Cypress Semiconductor CY7C63413 USB microcontroller (2001-03-29) [ Interface ]
• Using the microprocessor and UTOPIA interface of the CY7C955 (2001-03-29) [ Networks ]
• Designing a low-cost USB interface for an uninterruptable power supply with the Cypress Semiconductor CY7C63001 USB controller (2001-03-29) [ Power/Alternative Energy ]
• Designing a low-cost USB mouse with the Cypress semiconductor CY7C63000 USB controller (2001-03-29) [ Interface ]

• Upgrade your TAXI-275 with HOTLink (2001-03-29) [ Networks ]
• Replace your Am7968 TAXI transmitter with a CY7B923 HOTLink (2001-03-29) [ Networks ]
• Understanding the CY2291, CY2292 and CY2295 (2001-03-29) [ Interface ]
• Understanding the CY2254 (2001-03-29) [ Embedded ]
• Understanding asynchronous dual-port RAMs (2001-03-29) [ Memory/Storage ]

• Using the CY27H010 with the Rockwell V.FAST chipset (2001-03-29) [ Memory/Storage ]
• Interfacing the VIC068A to the MC68020 (2001-03-29) [ Controls/MCUs ]
• Understanding synchronous dual-ports (2001-03-29) [ Memory/Storage ]
• Firmware considerations for the Cypress Semiconductor CY7C63xxx USB microcontroller family (2001-03-29) [ Controls/MCUs ]
• Targeting Cypress PLDs from the Synopsys FPGA Express environment (2001-03-29) [ EDA/IP ]

• Terminating RoboClock II outputs (2001-03-29) [ Embedded ]
• Implement a SMPTE 259M serial digital interface using SMPTE HOTLink and CY7C9235/9335 (2001-03-28) [ Interface ]
• Implementing a synchronous DRAM controller in Cypress CPLDs (2001-03-28) [ Memory/Storage ]
• State machine design considerations and methodologies (2001-03-28) [ FPGAs/PLDs ]
• An SVIC to 68020-arbiter design (2001-03-28) [ Embedded ]

• Using the slave VIC (CY7C960/961) (2001-03-28) [ Embedded ]
• SPI implementation using serial mode 0 on EZ-USB (2001-03-28) [ Embedded ]
• Soft USB controller design challenges (2001-03-28) [ Interface ]
• Understanding synchronous FIFOs (2001-03-28) [ Memory/Storage ]
• Depth expansion of synchronous FIFOs (2001-03-28) [ Memory/Storage ]

• An introduction to active-HDL Sim (2001-03-28) [ EDA/IP ]
• Targeting Cypress ISR CPLDs with Synplify 6.0 (2001-03-28) [ Embedded ]
• Software considerations for the VIC64 (2001-03-28) [ EDA/IP ]
• CY9267 SMPTE 259M evaluation board user's guide (2001-03-28) [ Amplifiers/Converters ]
• Generation of synchronized processor clocks using the CY7B991 or CY7B992 (2001-03-28) [ Embedded ]

• Connecting CY7B951/CY7B952 to 3.3V framers (2001-03-28) [ Embedded ]
• Implementing High-Speed Physical Interfaces And Internet Protocols In Software (2001-03-27) [ Networks ]
• Design Issues And Verification Challenges For Home Networks (2001-03-27) [ Networks ]
• 10BaseS: Ethernet Transport Over Standard Twisted Pair Wire (2001-03-27) [ Networks ]
• How To Solve The Communication Interface Bottleneck Problem (2001-03-27) [ Networks ]

• Passive Optical Network As The Ultimate Solution For Broadband Access (2001-03-27) [ Networks ]
• Using Network Processors In DSL Residential Gateway Design (2001-03-27) [ Networks ]
• DC Cooling Fan Controller IC Eliminates Components And Failure Mechanisms (2001-03-27) [ Power/Alternative Energy ]
• Interfacing the QDR to the Xilinx Spartan-II FPGA (2001-03-27) [ Memory/Storage ]
• PCI target designs using Ultra37000 CPLDs (2001-03-27) [ FPGAs/PLDs ]

• Are your PLDs metastable? (2001-03-27) [ FPGAs/PLDs ]
• Replacing wire with inexpensive plastic fiber solutions (2001-03-27) [ Networks ]
• Quad Data Rate (QDR) SRAM clocking scheme (2001-03-27) [ Memory/Storage ]
• Implementing a reframe controller for the CY7B933 HOTLink receiver in a CY37032 CPLD (2001-03-27) [ Networks ]
• Quick and EZ guide to USB (2001-03-27) [ Embedded ]

• Bulk performance analysis of the Cypress AN2131 (2001-03-27) [ Embedded ]
• Replace MPC973 with RoboClock II (2001-03-27) [ Embedded ]
• Using CY7B991 (RoboClock), CY7B9911 (RoboClock+) and CY7B9910 (Robo Jr.) in 3.3V environments (2001-03-27) [ Embedded ]
• Software SPI implementation on EZ-USB (2001-03-27) [ Embedded ]
• Configuring EZ-USB without a USB connection (2001-03-27) [ Embedded ]

• RoboClock family test mode (2001-03-27) [ Embedded ]
• Innovative designs using the RoboClock family (2001-03-27) [ Networks ]
• RoboClock II TEST mode (2001-03-27) [ Embedded ]
• Overview Of The Internet Infrastructure & Its Key Requirements (2001-03-26) [ Networks ]
• Programmable SoC For Wireless, Handheld, Data Communication And Industrial System Designs (2001-03-26) [ RF/Microwave ]

• Forward Error Correction In Optical Networks (2001-03-26) [ Networks ]
• Technical Requirements And Design For "Multimedia Home Platform" (DVB-MHP) (2001-03-26) [ Amplifiers/Converters ]
• Broadband Signal Processor Suits Multimedia Applications (2001-03-26) [ Amplifiers/Converters ]
• High Performance CAMs For 10 Gb/s And Beyond (2001-03-26) [ Memory/Storage ]
• A Full-Compliance MP3 Decoder Using DSP (2001-03-26) [ Processors/DSPs ]

• Robust Implementations Of Java Technology For Embedded Devices (2001-03-26) [ Embedded ]
• PCI-DP: Programming bus master DMA transfers (2001-03-26) [ Embedded ]
• CY7C09449PV/SH7708 interconnection (2001-03-26) [ Embedded ]
• CY7C09449PV/MPC860 interconnection (2001-03-26) [ Embedded ]
• Designing a USB keyboard and PS/2 mouse combination device using the Cypress semiconductor CY7C63413 USB Microcontroller (2001-03-26) [ Embedded ]

• MoBL: The new Mobile SRAM (2001-03-26) [ Memory/Storage ]
• Understanding large FIFOs (2001-03-26) [ Memory/Storage ]
• Pinout compatibility considerations of SRAMs (2001-03-26) [ Memory/Storage ]
• NoBL, the ZBT-compatible family (2001-03-26) [ Memory/Storage ]
• NoBL: The fast SRAM architecture (2001-03-26) [ Memory/Storage ]

• Layout and termination techniques for Cypress clock generators (2001-03-26) [ Embedded ]
• Power estimation and thermal management for Cypress CPLDs (2001-03-26) [ Amplifiers/Converters ]
• Protection, decoupling and filtering of Cypress CMOS circuits (2001-03-26) [ Amplifiers/Converters ]
• Targeting Cypress PLDs from the Leonardo Spectrum Environment (2001-03-26) [ EDA/IP ]
• CY7C09449PV/TMS320LC31 interconnection (2001-03-26) [ Processors/DSPs ]

• Programming the W30X series clock generators (2001-03-26) [ Controls/MCUs ]
• Designing with Cypress in-system reprogrammable (ISR) CPLDs for PC cable programming (2001-03-23) [ FPGAs/PLDs ]
• Using Cypress CPLDs in mixed-voltage systems (2001-03-23) [ FPGAs/PLDs ]
• Board layout considerations for ISR programming of Cypress CPLDs (2001-03-23) [ FPGAs/PLDs ]
• An introduction to in-system reprogramming with FLASH370i (2001-03-23) [ FPGAs/PLDs ]

• Using high-speed serial links to supplement parallel data buses (2001-03-23) [ Networks ]
• Jitter in PLL-based systems: Causes, effects and solutions (2001-03-23) [ Amplifiers/Converters ]
• Programming the EZ-USB I²C interface (2001-03-23) [ Networks ]
• Innovative RoboClock family application (2001-03-23) [ Embedded ]
• Using IEEE 1149.1 boundary scan (JTAG) with Cypress Ultra37000 CPLDs (2001-03-23) [ EDA/IP ]

• Cascading ISR devices (2001-03-23) [ FPGAs/PLDs ]
• Using the Ultra37000 ISR prototype board (2001-03-23) [ FPGAs/PLDs ]
• Using the Delta39K ISR prototype board (2001-03-23) [ FPGAs/PLDs ]
• Interfacing with the SST (2001-03-23) [ Networks ]
• EZ-USB IO ports (2001-03-23) [ Controls/MCUs ]

• Converting from Intel 8x930Ax to Cypress EZ-USB (2001-03-23) [ Controls/MCUs ]
• Using FIFOs in Delta39K CPLDs (2001-03-22) [ Memory/Storage ]
• Interfacing the CY7B923 and CY7B933 (HOTLink) to a wide data clocked FIFO (2001-03-22) [ Networks ]
• HOTLink CY7B933 RDY pin description (2001-03-22) [ Networks ]
• HOTLink Built-In Self-Test (BIST) (2001-03-22) [ Networks ]

• Multiplex serial interfaces with HOTLink (2001-03-22) [ Networks ]
• Implementing the HAPI interface (2001-03-22) [ Controls/MCUs ]
• Generating PROM programming files (2001-03-22) [ Memory/Storage ]
• Understanding the FLEx36 dual-port SRAMs (2001-03-22) [ Memory/Storage ]
• Using hierarchy in VHDL design (2001-03-22) [ EDA/IP ]

• An Introduction to active-HDL FSM (2001-03-22) [ EDA/IP ]
• CY7C42X/46X FIFO interface to the CY7B923 (HOTLink) (2001-03-22) [ Embedded ]
• Converting an EZ-USB application to EZ-USB FX (2001-03-22) [ Embedded ]
• Drive ESCON with HOTLink (2001-03-22) [ Embedded ]
• Using heat sinks with larger CPLDs (2001-03-22) [ Amplifiers/Converters ]

• EMI suppression techniques with spread spectrum frequency timing generator (SSFTG) ICs (2001-03-22) [ Amplifiers/Converters ]
• Delta39K and Quantum38K dual-port RAM (2001-03-21) [ Memory/Storage ]
• Implementing a 128Kx32 dual-port RAM using the FLASH370 (2001-03-21) [ Memory/Storage ]
• The Delta39K/Quantum38K carry chain (2001-03-21) [ FPGAs/PLDs ]
• Delta39K PLL and clock tree (2001-03-21) [ FPGAs/PLDs ]

• Configuring Delta39K/Quantum38K (2001-03-21) [ FPGAs/PLDs ]
• Understanding bus-hold: A feature of Cypress CPLDs (2001-03-21) [ FPGAs/PLDs ]
• Interfacing the CY7C276 high-speed PROM to the AT&T, AD, Motorola and TI DSPs (2001-03-21) [ Memory/Storage ]
• Programming a 24LC00 EEPROM using the EZ-USB I²C Port (2001-03-21) [ Memory/Storage ]
• FIFO Dipstick using Warp2 VHDL and the CY7C371 (2001-03-21) [ FPGAs/PLDs ]

• ISR programming using an embedded processor with Jam (2001-03-21) [ FPGAs/PLDs ]
• Efficient arithmetic designs with Cypress CPLDs (2001-03-21) [ FPGAs/PLDs ]
• Method to instantiate and use a core in Warp Enterprise/Professional (2001-03-21) [ EDA/IP ]
• Redundant reference input switching (2001-03-21) [ Embedded ]
• Crystal oscillator topics (2001-03-21) [ Interface ]

• Using decoupling capacitors (2001-03-21) [ Amplifiers/Converters ]
• Understanding clocked FIFOs (2001-03-20) [ Memory/Storage ]
• Understanding burst modes in synchronous SRAMs (2001-03-20) [ Memory/Storage ]
• Parallel cyclic redundancy check (CRC) for HOTLink (2001-03-20) [ Networks ]
• ECL outputs (2001-03-20) [ FPGAs/PLDs ]

• TAXI to Cypress CY7C9689 HOTLink transceiver conversion series: 2. Serial interface (2001-03-20) [ Networks ]
• TAXI to Cypress CY7C9689 HOTLink transceiver conversion series: 1. System parallel interface (2001-03-20) [ Networks ]
• Method to instantiate and use a core in Warp with Cypress CPLDs (2001-03-20) [ EDA/IP ]
• Method to instantiate and use a core in Synplify (2001-03-20) [ EDA/IP ]
• Method to instantiate and use a core in LeonardoSpectrum (2001-03-20) [ EDA/IP ]

• Targeting Cypress PLDs from the Cadence environment (2001-03-20) [ EDA/IP ]
• Abel-HDL vs. IEEE-1076 VHDL (2001-03-20) [ EDA/IP ]
• Getting started converting .ABL files to VHDL (2001-03-20) [ EDA/IP ]
• PC system timing synthesizer power-on-reset (2001-03-20) [ Interface ]
• Clock terminology (2001-03-20) [ Embedded ]

• Using the CY7C964 with VIC (2001-03-20) [ Embedded ]
• The FLASH370i family of CPLDs and designing with Warp2 (2001-03-19) [ FPGAs/PLDs ]
• Designing with the CY7C335 and Warp2 VHDL compiler (2001-03-19) [ FPGAs/PLDs ]
• FLASH370i 5V to 12V dc-dc converter solutions (2001-03-19) [ FPGAs/PLDs ]
• CPLD power consumption comparison (2001-03-19) [ FPGAs/PLDs ]

• Converting designs from FLASH370i to Ultra37000 devices (2001-03-19) [ FPGAs/PLDs ]
• An introduction to in-system reprogramming (ISR) with the Ultra37000 (2001-03-19) [ FPGAs/PLDs ]
• Using the CY7B923 as an ECL clock source (2001-03-19) [ Networks ]
• Converting to CY7C955 from S/UNI-LITE (2001-03-19) [ Networks ]
• Interfacing to the quad OC-3 SONET/SDH transceiver (CY7B9514V) (2001-03-19) [ Networks ]

• CY7B8392 low-power Ethernet coaxial transceiver application (2001-03-19) [ Networks ]
• Designing with CY7C436xx synchronous FIFOs (2001-03-19) [ Memory/Storage ]
• Interfacing a 5V Cypress PROM to a 3.3V system using a CYBUS3384 bus switch (2001-03-19) [ Memory/Storage ]
• CY7B952 layout recommendation (2001-03-19) [ Embedded ]
• CY2308: Zero delay buffer (2001-03-19) [ Interface ]

• CY2305 and CY2309 as PCI and SDRAM buffers (2001-03-19) [ Interface ]
• Autorouters accelerate PCB design (2001-03-01) [ EDA/IP ]
• Integrating PCB layout with mechanical design (2001-03-01) [ EDA/IP ]
• Designing in consonance with noise (2001-03-01) [ Amplifiers/Converters ]
• One approach for debugging of modified designs (2001-03-01) [ EDA/IP ]

• Complex designs demand greater attention to data management (2001-03-01) [ EDA/IP ]
• Advances in acoustic microscopy (2001-03-01) [ Manufacturing/Packaging ]
• Circuit protection for next-generation products (2001-03-01) [ Power/Alternative Energy ]
• The battle between digital TV standards (2001-03-01) [ Amplifiers/Converters ]
• Via-fill materials for next-generation interconnect (2001-03-01) [ Manufacturing/Packaging ]

• Gigabit Ethernet, Fibre Channel over MANs (2001-03-01) [ Networks ]
• Testing dimensional limits of high I/O flip-chip design (2001-02-01) [ Manufacturing/Packaging ]
• Reconfigurable computing accelerates network device verification (2001-02-01) [ Networks ]
• Managing noise on the K6-III microprocessor (2001-02-01) [ Embedded ]
• Solder masks: Examining rules of thumb (2001-02-01) [ EDA/IP ]

• Direct plate processing for PCBs (2001-02-01) [ EDA/IP ]
• AD/DA conversion for HDTV applications (2001-02-01) [ Amplifiers/Converters ]
• Behavioral modeling accelerates for OEM requirements (2001-02-01) [ Amplifiers/Converters ]
• EDA platform benchmark: The desktop FPGA design flow (2001-01-01) [ FPGAs/PLDs ]
• Techniques for handling electromagnetic interference (2001-01-01) [ EDA/IP ]

• Characteristic impedance: A quick primer from the signal's point of view (2001-01-01) [ Amplifiers/Converters ]
• Contract manufacturing and flip-chip interconnect design (2001-01-01) [ EDA/IP ]
• Test coverage enhancements at the register transfer level (2001-01-01) [ Embedded ]
• Developing a dam and fill process during BGA package assembly (2001-01-01) [ Manufacturing/Packaging ]
• Rapid design of media-enabled information appliances (2001-01-01) [ Amplifiers/Converters ]

• Developing a design methodology for embedded memories (2001-01-01) [ Memory/Storage ]
• Thick photoresist patterning for WLP applications (2001-01-01) [ Manufacturing/Packaging ]